To provide the packet send schedule on mbuf timestamp the Tx
queue must be attached to the same UAR as Clock Queue is.
UAR is special hardware related resource mapped to the host
memory and provides doorbell registers, the assigning UAR
to the queue being created is provided via DevX API only.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The dedicated Rearm Queue is needed to fire the work requests to
the Clock Queue in realtime. The Clock Queue should never stop,
otherwise the clock synchronization might be broken and packet
send scheduling would fail. The Rearm Queue uses cross channel
SEND_EN/WAIT operations to provides the requests to the
Clock Queue in robust way.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch creates the special completion queue providing
reference completions to schedule packet send from
other transmitting queues.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step before moving the Tx queue creation
to the DevX approach. Some features require the shared UAR
for Tx queues and scheduling completion queues, the patch
manages the shared UAR.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The master and representors might be created over the multiport
Infiniband devices and the UAR resource allocated for sibling
ports might belong to the same underlying Infiniband device.
Hardware requires the write access to the UAR must be performed
as atomic 64-bit write, on 32-bit systems this is two sequential
writes, protected by lock. Due to possibility to share the same
UAR between sibling devices the locks must be moved to shared
context.
Fixes: f048f3d479 ("net/mlx5: switch to the shared IB device context")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the new devargs:
tx_pp - enables accurate packet send scheduling on mbuf timestamps
in the PMD. On the device start if "rte_dynflag_timestamp"
dynamic flag is registered and this devarg non-zero value is
specified, the driver initializes all necessary internal
infrastructure to provide packet scheduling. The parameter
value specifies scheduling granularity in nanoseconds.
tx_skew - the parameter adjusts the send packet scheduling on
timestamps and represents the average delay between beginning
of the transmitting descriptor processing by the hardware and
appearance of actual packet data on the wire. The value should
be provided in nanoseconds and is valid only if tx_pp parameter
is specified. The default value is zero.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This adds the ConnectX-6 Lx device id to the list of supported
Mellanox devices that run the MLX5 PMD.
The device is still in development stage.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The 'restrict' keyword is recognized in C99, while type qualifier
'__restrict' compiles ok in C with all language levels. This patch
is to replace the existing 'restrict' with '__rte_restrict' which
is a common wrapper supported by all compilers.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When flow is inserted with meta match item it requires a certain
register support.
As part of the flow validation of such flows, the validation
function is missing a check that the mlx5 driver is not in
legacy mode in terms of extended meta data support
(MLX5_XMETA_MODE_LEGACY flag).
If the driver is in legacy mode it will cause downstream
function that allocates needed register for meta data.
The fix checks explicitly the conditions for support of
meta data in FDB mode. If the conditions are not met
an error message will be issued.
Fixes: 9bf26e1318 ("ethdev: move egress metadata to dynamic field")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the OS specific functions, for flow actions
create and destroy operations.
In existing implementation, the functions to create flow actions
return a pointer to the created action object.
The new OS specific functions to create flow actions return 0 on
success, and (-1) on failure.
On success, a pointer to the created action object is returned
using an additional parameter.
On failure errno is set.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the OS specific functions, for flow create
and flow destroy operations.
In existing implementation, the functions to create objects
(flow/table/matcher) return a pointer to the created object.
The functions to destroy objects return 0 on success and errno on
failure.
The new OS specific functions to create objects return 0 on success,
and (-1) on failure.
On success, a pointer to the created object is returned using an
additional parameter.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In current implementation the flow type (DV/Verbs) is selected
using dedicated function flow_get_drv_type().
This patch adds OS specific function mlx5_flow_os_get_type(), to
allow OS specific flow type selection.
The new function is called by flow_get_drv_type(), and if it returns a
valid value (DV/Verbs) no more logic is required.
Otherwise the existing logic is executed.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch introduces the first OS specific utility functions,
for use by flow engine in different OS implementation.
The first utility functions are:
bool mlx5_flow_os_item_supported(item)
bool mlx5_flow_os_action_supported(action)
They are implemented to check OS specific support for different
item types and action types.
New header file is added:
drivers/net/mlx5/linux/mlx5_flow_os.h
This file contains the utility functions mentioned above for Linux OS.
At this stage they are implemented as static inline, for efficiency,
and always return true.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
As part of the effort to support DPDK on Windows and other OS,
rename 'verbs_action' to the generic name 'action'.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
As part of the effort to support DPDK on Windows and other OS,
rename from IB related name to generic name.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The mlx5_check_vec_rx_support function in the mlx5_rxtx_vec.c file
passes the RX queues array in the loop. Similarly, the mlx5_mprq_enabled
function in the mlx5_rxq.c file passes the RX queues array in the loop.
In both cases, the iterator of the loop is called i and the variable
representing the array size is called rxqs_n.
The i variable is of UINT16_T type while the rxqs_n variable is of
unsigned int type. The size of the rxqs_n variable is much larger than
the number of iterations allowed by the i type, theoretically there may
be a situation where the value of the rxqs_n will be greater than can be
represented by 16 bits and the loop will never end.
Change the type of i to UINT32_T.
Fixes: 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_dev_spawn function defines an struct mlx5dv_ctx_allocators type
variable several hundred rows after it starts, with the only use it
being passed as a parameter to the mlx5_glue->dv_set_context_attr
function.
However, according to DPDK Coding Style Guidelines, variables should be
declared at the start of a block of code rather than in the middle.
Therefore, to improve the Coding Style, the variable is passed directly
to the function without declaring it before.
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Using RTE_ETH_FOREACH_DEV_OF loop is not necessary when the driver wants
to find only the first match.
Use rte_eth_find_next_of to find it.
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new devarg will control the steering of the lacp traffic.
When setting dv_lacp_by_user = 0 the lacp traffic will be
steered to kernel and managed there.
When setting dv_lacp_by_user = 1 the lacp traffic will
not be steered and the user will need to manage it.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new action is an internal mlx5 action that will call
the rdma-core function MLX5DV_FLOW_ACTION_DEFAULT_MISS.
The default miss action will be used when a bond is
configured to allow traffic related to the bond to
be managed in the kernel.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new kernel adds the names like "pf0" for Host PCI physical
function representor on Bluefield SmartNIC hosts. This patch
provides correct HPF representor recognition over the kernel
versions 5.7 and laters.
The following port naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is
assumed, the value is the index of attached VF
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index, for example "pf0", Host PF
representor is assumed on SmartNIC systems.
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of Host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Fixes: 79aa430721 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The creation of DBR can be used by a number of different
Mellanox PMDs. for example RegEx / Net / VDPA.
This commits moves the DBR creation and release functions to common
folder.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' are implemented under net directory. To enable
additional devices (e.g. regex, vdpa) to access these getter functions
they are moved under common directory.
As part of this commit string sizes DEV_SYSFS_NAME_MAX and
DEV_SYSFS_PATH_MAX are increased by 1 to make sure that the destination
string size in strncpy() function is bigger than the source string size.
This update will avoid GCC version 8 error -Werror=stringop-truncation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, when allocate a new counter, it needs loop the whole
container pool list to get a free counter.
In the case with millions of counters allocated, and all the pools
are empty, allocate the new counter will still need to loop the
whole container pool list first, then allocate a new pool to get a
free counter. It wastes the cycles during the pool list traversal.
Add a global free counter list in the container helps to get the free
counters more efficiently.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For single counter, when allocate a new counter, it needs to find the pool
it belongs in order to do the query together.
Once there are millions of counters allocated, the pool array in the
counter container will become very large. In this case, the pool search
from the pool array will become extremely slow.
Save the minimum and maximum counter ID to have a quick check of current
counter ID range. And start searching the pool from the last pool in the
container will mostly get the needed pool since counter ID increases
sequentially.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, to check if any shared counter with same ID existing, it will
have to loop the counter pools to search for the counter. Even add the
counter to the list will also not so helpful while there are thousands
of shared counters in the list.
Change Three-Level table to look up the counter index saved in the
relevant table entry will be more efficient.
This patch introduces the Three-level table to save the ID relevant
counter index in the table. Then the next while the same ID comes, just
check the table entry of this ID will get the counter index directly.
No search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For the case which data is linked with sequence increased index, the
array table will be more efficient than hash table once need to search
one data entry in large numbers of entries. Since the traditional hash
tables has fixed table size, when huge numbers of data saved to the hash
table, it also comes lots of hash conflict.
But simple array table also has fixed size, allocates all the needed
memory at once will waste lots of memory. For the case don't know the
exactly number of entries will be impossible to allocate the array.
Then the multiple level table helps to balance the two disadvantages.
Allocate a global high level table with sub table entries at first,
the global table contains the sub table entries, and the sub table will
be allocated only once the corresponding index entry need to be saved.
e.g. for up to 32-bits index, three level table with 10-10-12 splitting,
with sequence increased index, the memory grows with every 4K entries.
The currently implementation introduces 10-10-12 32-bits splitting
Three-Level table to help the cases which have millions of entries to
save. The index entries can be addressed directly by the index, no
search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Some configuration of the mlx5 port are done by the kernel net device
associated to the IB device represents the PCI device.
The DPDK mlx5 driver uses Linux system calls, for example ioctl, in
order to configure per port configurations requested by the DPDK user.
One of the basic knowledges required to access the correct kernel net
device is its name.
Move function to get interface name from IB device path to the common
library.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Create a set of verbs callbacks in 'struct mlx5_verbs_ops'
and add MR operations to it (file net/mlx5/linux/mlx5_verbs.c).
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Prior to this commit MR operations were verbs based and hard coded under
common/mlx5/linux directory. This commit enables upper layers (e.g.
net/mlx5) to determine which MR operations to use. For example the net
layer could set devx based MR operations in non-Linux environments. The
reg_mr and dereg_mr callbacks are added to the global per-device MR
cache 'struct mlx5_mr_share_cache'.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The TCP checksum includes IPV4 pseudo-header checksum and L3
payload checksum which include TCP header and TCP payload.
When mlx5 LRO is enabled, HW will calculate the TCP payload
checksum, PMD need complete the IPV4 pseudo-header checksum
and the TCP header checksum.
The mlx5_lro_update_tcp_hdr function completes the TCP header
checksum, but this function using lower 4 bits of data-offset
field in TCP header to get the whole TCP header length, this
will cause TCP header checksum wrong calculation.
Update the code using higher 4 bits of data-offset field
instead of lower 4 bits.
Fixes: e4c2a16eb1 ("net/mlx5: handle LRO packets in Rx queue")
Cc: stable@dpdk.org
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The number of descriptors to configure in a Rx/Tx queue is passed to
the mlx5_tx/rx_queue_pre_setup() function by value. That means any
adjustments of this variable are local and cannot affect the actual
value that is used to allocate mbufs in the mlx5_txq/rxq_new()
functions. Pass the number as a reference to actually update it.
Fixes: 6218063b39 ("net/mlx5: refactor Rx data path")
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The Legacy MPW (multi-packet write) should not be engaged implicitly.
We should exclude this function from a Tx burst routine selection
process unless it is requested specifically by setting the txq_mpw_en
devarg. Exclude this function from the selection process the same way
it is done for the Enhanced MPW in the mlx5_select_tx_function()
routine.
Fixes: eb8121ab9d ("net/mlx5: introduce Tx burst routine template")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5 statistics are calculated by several methods:
1. In software when packets go through datapath.
2. Calling ioctl with ETHTOOL command (Linux specific).
3. Reading counters from SYSFS device path (Linux specific).
The Linux related functions are moved to file linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are three types of eth_dev_ops: primary, secondary and isolate.
Their function calls assignments are moved from common file
mlx5.c to the Linux specific file linux/mlx5_os.c.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File mlx5_ethdev.c is partially moved to linux/mlx5_ethdev_os.c for
functions which are Linux specific. Functions which are Linux agnostics
remain in mlx5_ethdev.c file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_socket.c file is using APIs which are Linux specifics. Therefore
move it (including mlx5_socket.h) from net/mlx5 directory to
net/mlx5/linux directory. This commit also updates the Makefile and
the meson files.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
In DV enabled MLX5 PMD build mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW].size
was initiated for DV structure. If RTE initialization encountered MLX5
PCI function with disabled DV support
mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW].size was reduced to match legacy
verbs flow size. Since mlx5_ipool_cfg[MLX5_IPOOL_MLX5_FLOW] is a
global variable that change reflected on DV enabled MLX5 PCI functions
too.
Running flow with invalid ipool size crashes PMD.
The patch adjusts ipool flow size for each active PCI function.
Fixes: b88341ca35 ("net/mlx5: convert flow dev handle to indexed")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Recent patch added definition of mask MLX5_GTP_FLAGS_MASK, just
above function flow_dv_validate_item_gtp(), where it is used.
Patch was applied together with other patches which modified the same
file, so the mask was located further away from the function it is
used in.
This patch moves the mask definition to the proper location.
Fixes: 563ac307a4 ("net/mlx5: support match on GTP flags")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
1. Replace 'struct ibv_device *' with 'void *' in 'struct
mlx5_dev_spawn_data'. Define a getter function to retrieve the
device name.
2. Rename ibv_dev and ibv_port as phys_dev and phys_port
respectively.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
File drivers/net/linux/mlx5_os.h is added. It includes specific
Linux definitions such as PCI driver flags, link state changes
interrupts, link removal interrupts, etc.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Refactor PCI probing related code. Move Linux specific functions (as
well as verbs and dv related code) from mlx5.c file to linux/mlx5_os.c
file.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
umem field is used in several structs. Its type 'struct mlx5dv_devx_umem
*' is changed to 'void *'. This change will allow non-Linux OS
compilations.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Define 'struct mlx5_dev_attr' which is ibv and dv independent. It
contains attribute that were originally contained in 'struct
ibv_device_attr_ex' and 'struct mlx5dv_context dv_attr'. Add a new API
mlx5_os_get_dev_attr() which fills in the new defined struct.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Replace 'struct ibv_pd *' with 'void *' in struct mlx5_ctx_shared and
all function calls in mlx5 PMD.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
