Adding support for RTE Flow VLAN insert and strip actions.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds required bit to handle VF FLR
indication from Management FW (MFW) of the device
With that VFs were able to load in VM (VF attached as PCI
passthrough to the guest VM) followed by FLR successfully
Updated the docs/guides with the feature support
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Thor based NICs can support PAM4 as wells as NRZ link negotiation.
With this patch we are adding support for 200G link speeds based on
PAM4 signaling. While PAM4 can negotiate speeds for 50G and 100G as
well, the PMD will use NRZ signalling for these speeds.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Kernel v5.10 will introduce the ability to efficiently share a UMEM
between AF_XDP sockets bound to different queue ids on the same or
different devices. This patch integrates that functionality into the AF_XDP
PMD.
A PMD will attempt to share a UMEM with others if the shared_umem=1 vdev
arg is set. UMEMs can only be shared across PMDs with the same mempool, up
to a limited number of PMDs goverened by the size of the given mempool.
Sharing UMEMs is not supported for non-zero-copy (aligned) mode.
The benefit of sharing UMEM across PMDs is a saving in memory due to not
having to register the UMEM multiple times. Throughput was measured to
remain within 2% of the default mode (not sharing UMEM).
A version of libbpf >= v0.2.0 is required and the appropriate pkg-config
file for libbpf must be installed such that meson can determine the
version.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
This patch fixed the issue that rx/tx bytes statistics counters
overflowed on 48 bit limitation by enlarging the limitation.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the exact match table type for the SWX pipeline. Used under the
hood by the SWX pipeline table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the PCAP file-based source (input) and sink (output) port types
for the SWX pipeline. The sink port is typically used to implement the
packet drop pipeline action. Used under the hood by the pipeline rx
and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the Ethernet device input/output port type for the SWX pipeline.
Used under the hood by the pipeline rx and tx instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add tables to the SWX pipeline. The match fields are flexibly selected
from the headers and meta-data. The set of table actions is flexibly
selected for each table from the set of pipeline actions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add extern objects and functions to plug into the SWX pipeline any
functionality that cannot be efficiently implemented with existing
instructions, e.g. special checksum/ECC, crypto, meters, stats arrays,
heuristics, etc. In/out arguments are passed through mailbox with
format defined by struct.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add input ports to the newly introduced SWX pipeline type. Each port
instantiates a port type that defines the port operations, e.g. ethdev
port, PCAP port, etc. The RX interface is single packet, with packet
batching internally for performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add new improved Software Switch (SWX) pipeline type that supports
dynamically-defined packet headers, meta-data, actions and pipelines.
Actions and pipelines are defined through instructions.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
The page "Development Kit Build System" was about make,
so it has been removed. A better help is in the Linux guide
(note: mlx4/mlx5 are supported on Linux only for now).
Fixes: 3cc6ecfdfe85 ("build: remove makefiles")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ciara Power <ciara.power@intel.com>
When the --werror meson build option is set, we can set the WARN_AS_ERRORS
doxygen option in the doxygen config flag to get the same behaviour for API
doc building as for building the rest of DPDK. This can help catch
documentation errors sooner in the development process.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The meson documentation states that projects should not rely upon the
custom_target build commands are run from any given directory. Therefore,
rather than writing the standout output from doxygen to the current
directory - which could be anywhere in future, put it into the api
directory, so that it is in a known location.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The API docs were output to "<build>/doc/api/api" folder, which was
ugly-looking with the repeated "api", and inconsistent with the sphinx
guides which were written to "<build>/doc/guides/html". Changing the
doxygen output folder to "html" fixes both these issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The standard output of doxygen is very verbose, and since ninja mixes
stdout and stderr together it makes it difficult to see any warnings from
the doxygen run. Therefore, we can just log the standard output to file,
and only output the stderr to make warnings clear.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Flow Manager (flowman) provides DECAP_STRIP operation which
decapsulates VXLAN header and then removes VLAN header from the inner
packet. Use this operation to support vxlan_decap followed by
of_pop_vlan.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Group 0 corresponds to TCAM which supports priorities. Accept non-zero
priorities for group 0 flows.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Use Flow Manager (flowman) to support egress PORT_ID action. It can
steer egress packets from PFs and VFs to any uplink port as long as
they are all on the same VIC adapter. It can also steer packets
between ports on the same VIC adapter (i.e. loopback).
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Use Flow Manager (flowman) to support flow API for
representors. Representor's flow handlers simply invoke PF handlers
and pass the representor's flowman structure. The PF flowman handlers
are aware of representors and perform appropriate devcmds to create
flows on the NIC.
Also use flowman to create internal flows for implicit VF-representor
path. With that, representor Tx/Rx is now functional.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add usage of rte_eth_link_to_str function to applications and docs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The Agilio CX family of smartNIC's generally have a 1:many mapping of PF
to physical ports. Elaborate on this mapping in the PF multiport section
of the NFP PMD documentation.
Fixes: d625beafc8be ("doc: update NFP with PF support information")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Currently, all data paths already support flow mark, so remove devargs
"flow-mark-support". FDIR matched ID will display in verbose
when packets match the created rule.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
Start support matching on icmpv4 and icmpv6.
Usage:
--icmpv4: add icmp item to match on.
--icmpv6: add icmpv6 item to match on.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Sometimes you need to check flow performance for
certain port and not all ports. Thus a portmask
option is needed.
Usage:
--portmask=N
Where N represent the hexadecimal bitmask of ports
used.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce raw-encap and raw-decap actions.
The two actions are added in command line
options, and for the data to encap or decap
the user need to parse it within the command
line.
All values of raw-encap data is set to be fixed
values.
Usage example:
--raw-encap=ether,ipv4,udp,vxlan
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce flag action support to flow perf
application.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce headers modify actions in the app.
All header modify actions will add different value
for each flow, to make sure each flow will create
and use it's own actions.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
The old design was using the bit mask to identify
items, action and attributes.
So it was all based on the order of the code itself,
to place the order of the actions, items & attributes
inside the flows. Such design will lead into many failures
when some PMD support order different than other PMD,
in the end the rules will fail to create. Also sometimes
the user needs to have one action before other actions
and vice versa, so using new design of arrays that
take user order into consideration make more sense.
After this patch, we start supporting inner items
and more than one instance of same action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Currently all the sections are considered as main title under
DPDK Tools User Guides.
This fix will collect all flow perf sections under one title
which is Flow Performance Tool
Fixes: 3344cf2e3001 ("app/flow-perf: add flow performance skeleton")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Updating the type for 'port' variable from 'uint8_t' to 'uint16_t'.
Fixes: 8c3495f5d2dd ("net/dpaa: support loopback API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Using the rte_flow action RSS types field,
may result in undefined outcome.
For example selecting both UDP and TCP,
selecting TCP RSS type but the pattern is targeting UDP traffic.
another option is that the PMD doesn't support all requested types.
Until now, it wasn't clear what will happen in such cases.
This commit clarify this issue by stating that the PMD
will work in the best-effort mode, and will fail
in case the requested type is not supported.
Signed-off-by: Ori Kam <orika@nvidia.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".
Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.
This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Some ethdev functions are for drivers only, not for applications.
Since we have '__rte_internal' tag available now, marking internal
functions with it and moving functions to INTERNAL section in linker
script.
This is also good for documenting the internal functions.
Some internal APIs seems marked as experimental, but it doesn't make
sense to have internals APIs as experimental, updating their tag and
doxygen comments.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
