Add support for Receive Side Scaling feature.
RSS hash and reta table configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for promiscuous/allmulticast modes configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for Rx/Tx descriptors status information.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add support for device stats, xstats and queue stats
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement link interrupt, link info, link polling.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add RX/TX function prototypes for further datapath development.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Start, stop and reset are all done via hw_atl layer.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
This is hw_atl logic layer derived from linux atlantic
driver. It contains RX/TX hardware initialization
sequences, various hw configuration.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
AQC NICs comes in fields with two major
FW generations: 1x and 3x.
This is part of linux atlantic driver shared code,
responsible for internal NIC firmware interactions,
including link management ops, FW initialization,
various lifecycle features.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
This patch introduces hw_atl layer which is maintained
in sync with linux kernel driver.
It will generally be in sync with linux upstream.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Add implementation for hardware registers access routines.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Implement logging macroses for debug purposes.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
- track whether counter DMAs are active or not so they can be stopped if
needed before DMA memory is freed
- fix counter DMA shut-down by changing vnic_dev_counter_dma_cfg() to
take the number of counters to DMA instead of high counter index and
use num counters = 0 to shut off DMAs
- remove unnecessary checks that DMA counter memory is valid and that
counter DMAs are in use
- change the minimum DMA period to match what 1400 series adapter is
capable of
- fix comments and change a couple variable names to make more sense
Fixes: 86df6c4e2fce ("net/enic: support flow counter action")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
If QAT crypto pmd failed to be created due to reaching MAX
cryptodevs it prevented QAT comp PMD being created. And vice versa.
Change to warning in these cases and allow the other PMD to be created.
Fixes: c0c90bc4cade ("compress/qat: add create and destroy functions")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Cel <tomaszx.cel@intel.com>
This patch fixes the cryptodev library version number that was
missed updating in DPDK 18.08.
Fixes: a4493be5bdfa ("cryptodev: replace bus specific struct with generic dev")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the validation test cases for
CAAM JR driver
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
add caam jr driver details, supported features and algorithms
in the document.
release note and MAINTAINERS are also updated.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch provides the support for protocol offload
to the hardware. following security operations are
added:
- session_create
- session_destroy
- capabilities_get
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for :
1. creating run time sec hw decriptors for a given request.
2. enqueue operation to the caam jr ring
3. dequeue operation from the caam jr ring in poll mode
4. creating a crypto protocol descriptor for session - first time.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support to create session configuration
of various types i.e. cipher, auth and aead etc.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
caam_jr need support from kernel caam driver for
job ring initialisation. So to access register space
for job ring and allow re configure and map to userspace
UIO interface is used. This also allows to handle the
caam interrupts from the user space.
This patch adds UIO specific operations
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add routines for configuring the hw
to support various features.
These routines will be used by the PMD ops.
The patch also defines structure and macros used
to access hw capabilities.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
caam_jr hardware can be tuned for multiple settings
like ring depth, coalescing, notification types, cache
size etc.
These parameter can be used for performance tuning
for various platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The caam_jr poll mode crypto driver is supported for
NXP SEC 4.x+ (CAAM) hardware accelerator.
This driver is by default supported on LE platforms,
if it is used on BE platforms like LS104X,
config option CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE can be
enabled.
This patch add skeleton for caam jobring driver
with probe and uintialisation functions
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the current AESNI-MB PMD with added AES-GCM
algorithm support. The patch includes the necessary changes
to the code including the capability update, control and data
patch changes for the AES-GCM algorithm support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This patch add AES-CMAC support. CMAC is a keyed hash function
that is based on a symmetric key block cipher. It is One-Key
CBC MAC improvement over XCBC-MAC. RFC 4493. NIST SP 800-38B.
Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The documentation of rte_crypto_op_pool_create indicates that
specifying RTE_CRYPTO_OP_TYPE_UNDEFINED would create a pool that
supports all operation types. This change makes the code
consistent with documentation.
Fixes: c0f87eb5252b ("cryptodev: change burst API to be crypto op oriented")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
event dpaa2 device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa2_eventdev to attach
dpaa2_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Queues attached to event crypto device can be
parallel, atomic and ordered.
This patch add support for atomic queues processing
for dpaa2_sec queues.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
dpaa2_sec hw queues can be attached to a hw dpaa2 event
device and the application can configure the event
crypto adapter to access the dpaa2_sec packets using
hardware events.
This patch defines APIs which can be used by the dpaa2
event device to attach/detach dpaa2_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
