Add new parser module which can parse a packet in binary
and generate information like ptype, protocol/offset pairs
and flags which can be used to feed the FXP profile creation
directly.
The patch added skeleton of the parser instance create and
destroy APIs:
ice_parser_create
ice_parser_destroy
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add functions used by the driver for setting and getting the shared
driver parameters. These will be used by the driver in order to share
the PTP clock index identifier between PF drivers.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add a helper function to check if the underlying part can
support 100M speeds.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Rename ucast_shared to umac_shared, as "umac" is a more widely
used shorthand for "unicast MAC".
Also add a helper function to set this flag. This helper is
expected to be called by core drivers.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Move replay_pre_init function to interface.
Add further MAC rules, despite unicast address is already on list.
Signed-off-by: Marcin Domagala <marcinx.domagala@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add function ice_is_e810t() to be able to distinguish if hardware is
E810T based or not.
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
The ice hardware supports exposing a hardware clock for high precision
timestamping. This is primarily intended for accelerating the Precision
Time Protocol.
Add several low level functions intended to be used as the basis for
enabling the device clock, and ensuring that the port timers are
synchronized properly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
External topology devices (e.g. PHYs) connected to 100G or to SoC that
includes 100G IP might have a firmware engine within the device and
the firmware is usually loaded from NVM connected to the topology
device.
The topology device NVM images can be updated using SW tools but
such solution poses a security risk if there is no validation of
the integrity of an image before programming it to the device NVM.
In order to prevent security risk, the topology device NVM image might
be included as part of 100G NVM image. When the topology device
NVM image is present in the 100G NVM image, it is authenticated
and might be loaded to the topology device at startup or on command
of SW using dedicated AQ.
This patch provides support for this functionality.
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add helper functions to set the GPIO pin state or get the value of a
GPIO signal that's the part of the topology based on AQ commands.
This change is needed to setup GPIO pins state for PTP, SyncE etc.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable I2C read/write AQ commands. They are now required for
controlling the external physical connectors via external I2C
port expander on E810-T adapters.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In case of new link establishment flow we should use
Report Default Configuration if FW AQ API version
supports it. This patch adds check function for Report
Default Configuration support and updates ice_set_fc(),
ice_cfg_phy_fec() and ice_aq_get_phy_caps() accordingly.
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Retry sending some AQ commands, as result of EBUSY AQ error.
This change follows the latest guidelines from HW. It is better
to retry the same AQ command several times, as the result of
EBUSY, instead of returning error to the caller right away.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The VLAN mode of the device has to be configured while the global
configuration lock is held while downloading the DDP, specifically after
the DDP has been downloaded. In order to support this a VLAN mode
interface was added. By default the device will stay in single VLAN
mode (SVM), which is the current implementation. However, this can be
changed by implementing the .set_dvm op.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There is no way to specify a global RSS lookup table (LUT) ID with the
current API and 0 is the only global LUT ID that can be supported since
it's hard coded.
Upcoming support to specify a global LUT ID will require this
flexibility. To fix this, update the API for ice_aq_get_rss_lut() and
ice_aq_set_rss_lut() to take the new structure
ice_aq_get_set_rss_params, which includes a global_lut_id member. A new
structure was introduced instead of adding another parameter to the
previously mentioned functions for 2 reasons:
1. Reduce the number of parameters passed to the functions.
2. Reduce the amount of change required if the arguments ever need to be
updated in the future.
Also, reduce duplicate code that was checking for an invalid vsi_handle
and lut parameter by moving the checks to the lower level
__ice_aq_get_set_rss_lut().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
These functions reside in ice_sched.c but the function protypes are
declared in ice_common.h. Move the function prototypes to ice_sched.h.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The PSM Configuration has a Rate Limiter for each associated
switch port based on its relative speed from the total BW of
switch ports connected to LAN controller. The rate limiters
will be dynamic get readjusted if switch port speeds are
changed at the root node layer of the scheduler tree. Adding
a function to directly modify the EIR of root node.
Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
As of NVM ver 1.7.1 there is a new AQ command to add and remove
LLDP filters for Rx flow. This patch implements the support
structure to implement this functionality.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
There are a number of structures that consist of a one-element array as the
only struct member. Some of those are unused (ice_aqc_add_get_recipe_data,
ice_aqc_get_port_options_data, ice_aqc_dis_txq, etc.) so remove them.
Others are used to index into a buffer/array consisting of a variable
number of a different data or structure type. Those are unnecessary since
we can use simple pointer arithmetic or index directly into the buffer to
access individual elements of the buffer/array.
Additional code cleanups were done near areas affected by this change.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
To implement a FW workaround for LFC, a set_local_mib must be
performed after every link up event. For systems that do not
have DCB configured, we need to move the function
ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to
ice_common.c so that the driver always has access to this AQ
command.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
struct ice_aqc_get_phy_caps_data has multiple autoneg enable bits.
ice_is_phy_caps_an_enabled checks all bits and returns true if any
autoneg enable bits are set.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add couple functions that DPDK would like to use for accessing the
NVM.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When writing the driver's struct ice_tlan_ctx structure, do not write
the 8-bit element int_q_state with the associated internal-to-hardware
field which is 122-bits, otherwise the helper function ice_write_byte()
will use undefined behavior when setting the mask used for that write.
This should not cause any functional change and will avoid use of
undefined behavior. Also, update a comment to highlight this structure
element is not written.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_get_pfa_module_tlv and ice_read_pba_string functions primarily
deal with reading from the Shadow RAM portion of the NVM contents. As
these functions are NVM focused, move them into the ice_nvm.c file.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
DCF runs as a VF so it can't access PF registers. And export the filter
management list static functions as public for make DCF initialization.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update copyright date to 2020.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Currently the NVM and Option ROM version information is stored in
a minimal format. The ice_get_nvm_version function exists to extract
this information for display.
This needlessly complicates using these fields as the extraction
function must be called to parse the NVM and Option ROM data. Further
confusion occurs because the prefix of "oem_" is used for the Option
ROM version. This appears to have been done because the Option ROM data
was requested for display by OEMs.
Refactor this code so that the NVM version and Option ROM version
components are extracted immediately.
Introduce a new struct ice_orom_info which will store the Option ROM
major, build, and patch numbers. Introduce the new major_ver and
minor_ver fields to store the NVM version in its high and low byte
components.
Remove the ice_get_nvm_version function. Instead, use the same logic to
convert the fields read from the NVM into the extracted format.
This simplifies use of these fields as they will be stored already
parsed, without needing to use the bit masks or call
ice_get_nvm_version.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In this patch, we will modify the ice_copy_phy_caps_to_cfg(...) function
to conditionally fill up the
ice_aqc_set_phy_cfg_data.module_compliance_enforcement with correct
value, based on the PHY persistent feature.
Apply the ice_copy_phy_caps_to_cfg() function inside ice_set_fc()
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adjust variable size between u8 and u16 to fix casting issues
Also fix couple coding style issues
Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adds functions to check for link override firmware support and get
the override settings for a port. Link override allows a user to force
link settings that are not normally supported.
Firmware support is version dependent so a function to check support has
been added.
The link FC settings will use the override if available.
Signed-off-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove unused code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove redundant empty lines
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This function is needed by the driver to move PSM leaf nodes to a new
parent.
Additionally, add struct ice_aqc_move_txqs to struct ice_aq_desc so
driver code can access it.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Improve code orgnization, move declaration of ice_cfg_tc_nod_bw_alloc and
ice_cfg_rl_burst_size from ice_common.h to ice_nvm.h.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add a new structure, ice_nvm_access, used to request access to read or
write certain NVM related registers.
The structure is used by NVM Update to request read or write of specific
NVM registers in order to perform updates.
Additionally, there is a command to request the driver "features"
structure which represents data about what features of the NVM access
interface the driver supports.
Implement ice_handle_nvm_access to parse the access request and perform
the necessary function.
This function verifies that the access request is valid. If so, the
function will delegate to perform the register read, register write, or
copying of the driver ice_nvm_features structure.
If the request is invalid, the function will report a suitable error
codition that can be propagated out.
Only a subset of registers is accessible, and all other registers will
be rejected with ICE_ERR_OUT_OF_RANGE.
When reading, the contents of the variable sized data buffer will be
used as storage for returning the register value. When writing, the
contents will be used as input for the value to write to the register.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The GLV_REPC register contains statistics for tracking received packets
that are discarded due to certain errors.
This register behaves differently from some of the other related
statistics registers in two ways. First, it contains two 16bit
statistics, and thus cannot be read as a 32bit or 40bit statistic.
Second, the two stats do not roll over, but instead cap at 0xFFFF.
Add a new ice_stat_update_repc function which will read the register and
increment the appropriate statistics in the ice_eth_stats structure.
Since the register does not roll over, make use of the "Write Clear"
behavior, and write to the register to reset it every time we read it.
Add extra space for the two statistics that are counted by this
register, rx_errors, and rx_no_desc.
For now, wrap the new function and stats counters in !LINUX_SUPPORT.
This can later be removed if and when the Linux driver implements
support for reading the statistics.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add additional functions to aide in caching PHY
configuration. In order to cache the initial modes,
we need to determine the operating mode based on
capabilities. Add helper functions for flow control
and FEC to take a set of capabilities and return the
operating mode matching those capabilities. Also add
a helper function to determine whether a PHY capability
matches a PHY configuration.
Introduce a mask for valid link speeds and unwrap
ice_copy_caps_to_cfg() for more builds so that we can utilize
it in more places.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The dynamic device personalization (DDP) file download onto the device
can fail, and when this happens the driver has to transition to "safe
mode" where only basic functionality is possible.
The device though doesn't understand safe mode, and so the opcodes to
discover device/function capabilities (0x000A and 0x000B) return all
the capabilities of the device, which includes capabilities that the
driver cannot support when in safe mode.
The initialization flows in the driver are based on the capabilities
information (obtained by the driver with the above mentioned opcodes).
To reuse the same initialization flows in safe mode, it becomes
necessary for the driver to override the currently stored capabilities
information with safe mode capabilities. This is done by a new function
introduced in this patch - ice_set_safe_mode_caps.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
read/write module eeprom on i2c bus.
Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove firmware logging debug code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
correct argument pi(port_info) passed in function
ice_sched_get_first_node(), otherwise it will return the incorrect
node.
functions ice_sched_get_agg_node and ice_sched_cfg_sibl_node_prio:
change argument from hw to pi for it to align to correct port.
Moved saving tc node bw info from hardware structure(hw) to port info
structure(pi). This change allows multiple ports to save and replay
the information correctly.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
New support function added - ice_get_pfa_module_tlv(), the driver or
other modules can make use of this function to read the pfa area.
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch adds code to detect NVM rollback. The rollback detection
is done as part of the HW init flow. When NVM rollback is detected,
a warning message is printed along with the FW/NVM version data.
To do this, this patch adds a helper function ice_get_nvm_version.
Also, a pointer to hw->nvm is already available in ice_init_nvm. Just use
this instead of &hw->nvm.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add a helper function to get FW mode. The FW mode can be normal,
debug, recovery or rollback.
This makes ice_is_fw_in_rec_mode redundant, so remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Modify ice_stat_update40 to use rd64 instead of two calls to rd32.
Additionally, drop the now unnecessary hireg function parameter.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_init_all_ctrlq and ice_shutdown_all_ctrlq functions create and
destroy the locks used to protect the send and receive process of each
control queue.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ice_debug_cq function is only called from ice_controlq.c, and has no
other callers outside of that file. Move it and mark it static to avoid
namespace pollution.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
After the transition from cable-unplug to cable-plug events, FW will
clear the set-phy-cfg data, sent by user. Thus, we will need to
cache these info.
1. The submitted data when set-phy-cfg is called. This info will be used
later to check if FW clears out the PHY info, requested by user.
2. The FC, FEC and LinkSpeed, requested by user. This info will be used
later, by device driver, to construct the new input data for the
set-phy-cfg AQ command.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
