Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The page size is often retrieved from the macro PAGE_SIZE.
If PAGE_SIZE is not defined, it is either using hard coded default,
or getting the system value from the UNIX-only function sysconf().
Such definitions are replaced with the generic function
rte_mem_page_size() defined for each supported OS.
Removing PAGE_SIZE definitions will fix dlb drivers for musl libc,
because #ifdef checks were missing, causing redefinition errors.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Boyer <aboyer@pensando.io>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The completion type was wrong.
Don't check the completion if the wait timed out.
Fixes: 669c8de67c88 ("net/ionic: support basic LIF")
Cc: stable@dpdk.org
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
A future patch will allow Tx scatter/gather to be disabled. Store the
value in the queue so it can be changed at runtime based on the
configuration.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Create a unique Q-CQ struct for adminq, notifyq, rxq, and txq to
reduce the size of each object.
Minimize the size of each field to squeeze into as few cachelines
as possible.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
The adminq is the only caller of ionic_q_service(), so absorb it
into ionic_adminq_service().
Move all of the adminq code together into ionic_main.c.
Staticize a few things.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Add Q_NEXT_TO_POST() and Q_NEXT_TO_SRVC() macros.
Use a precomputed size mask.
This will conserve resources.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
The ionic PMD only supports Tx queue version 1 or greater.
Version 1 introduced a new SGL format with support for more
fragments per descriptor.
Add release notes and an explanation to the docs.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Only the NotifyQ uses an interrupt, so simplify the other queues.
Simplify ionic_dev_cmd_adminq_init() and ionic_cq_init().
Move ionic_intr_alloc() into ionic_notify_qcq_alloc().
Create ionic_lif_notifyq_deinit().
Simplify ionic_lif_qcq_deinit().
Remove unneeded flags and defines.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The address is not needed in the firmware.
This reduces the startup time a bit.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Signed-off-by: Neel Patel <neel@pensando.io>
Adding F_ENA to the q_init command has the same effect as q_enable.
This reduces the startup time a bit.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Signed-off-by: Neel Patel <neel@pensando.io>
Configuration flags come to the driver in dev_configure(). From there,
the driver calls ionic_lif_configure() to update the lif->feature
bitfield, and then programs the port.
Features like VLAN_RX_FILTER and RX_HASH cannot be disabled in the
device, so do nothing in response to requests to disable them. (The
device config would ideally show them enabled by default, but some
DTS tests fail if RSS_HASH is set but RSS is not.)
Move features from the per-queue to per-port lists. IONIC does not
really support per-queue configuration: the stack disallows disabling
a queue feature if it is enabled on the port, while the device
disallows enabling a queue feature if it is disabled on the port.
Thus all configuration is per-port.
Move the guts of ionic_vlan_offload_set() into a new function,
ionic_lif_configure_vlan_offload(), so it can be called by
ionic_lif_configure().
Move the check for DEV_RX_OFFLOAD_SCATTER from rx_queue_setup() up
into ionic_lif_configure().
Warn if rx_drop_en is not set.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Otherwise they cannot be restarted, because the FW will reject INIT
or ENA commands on queues which are already running.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Add UP and FW_RESET state flags.
Update the stack info when the link state changes.
Convert set_link_up/set_link_down to lif_start/lif_stop.
Condition reported link state on UP flag.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
ionic_dev_close() is responsible for destroying the ethdev, lif, and
adapter. eth_ionic_dev_remove() calls ionic_dev_close().
Remove-on-close is now required behavior for a PMD.
Remove the UNMAINTAINED flag.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Otherwise, non-default settings (like PROMISC) get reset.
This will become important when link toggling is tied to LIF stop/start.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
This preserves settings across a LIF stop/start.
This will become important when link toggling is tied to LIF stop/start.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Expose ionic_opcode_to_str() so it can be used for dev cmds, too.
Store the device name in struct adapter.
Switch to memcpy() to work around gcc false positives.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes the code clearer and conserves resources.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add basic, per queue and extended statistics for
RX and TX, both from the adapter and the driver.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add code to manipulate the RSS configuration
used by the adapter.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for managing RX filters based on MAC and VLAN.
Hardware cannot provide the list of filters, thus we keep
a local list.
Add support for promisc and allmulticast modes.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for port start/stop and handle basic features
including MTU and link up/down.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the notify queue, which is used for events
published by the NIC.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the admin queue, which is used for most
of the NIC configurations.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Doorbell registers are used by the driver to signal to the NIC
that requests are waiting on the message queues.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Initialize LIFs (Logical Interfaces) which represents
external connections. The NIC can multiplex many LIFs
to a single port, but in most setups, LIF0 is the
primary control for the port.
Create a device for each LIF.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
