This patch enabled Protocol Agnostic Flow (raw flow) Offloading Flow
Director (FDIR) in AVF, based on the Parser Library feature and the
existing rte_flow `raw` API.
The input spec and mask of raw pattern are first parsed via the
Parser Library, and then passed to the kernel driver to create the
flow rule.
Similar as ice PMD's implemnentation, each raw flow requires:
1. A byte string of raw target packet bits.
2. A byte string contains mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add recommended matching list for i40e PMD in DPDK 21.05,
21.08, 21.11 and 22.03. And add a known issue when FW upgrade
to a version 8.4 and higher
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds queue and queue group priority configuration
support. The highest priority is 0, and the lowest priority
is 7.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable basic TM API for PF only. Support for adding profiles and queue
nodes. Only max bandwidth is supported in profiles. Profiles can be
assigned to target queues and queue group. To set up the exact queue
group, we need to reconfigure topology by delete and then recreate
queue nodes. Only TC0 is valid.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1ca05831b9b added a check that SDP3 (used as a TX_DISABLE output to the
SFP cage on these cards) is not asserted to avoid incorrectly reporting
link up when the SFP's laser is turned off.
ff8162cb957 limited this workaround to fiber ports
This patch:
* Adds devarg 'fiber_sdp3_no_tx_disable' not all fiber ixgbe devs use
SDP3 as TX_DISABLE
Fixes: 1ca05831b9b ("net/ixgbe: fix link status")
Fixes: ff8162cb957 ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Yellow meter action support is added in meter hierarchy validation.
If one color uses meter action, the other can only use NULL action
or the same meter action. And only shared meter is supported.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Vhost backend of different devices have different features.
Add an API to get vDPA device type, net device or blk device
currently, so users can set different features for different
kinds of devices.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch adds the use case for async dequeue API. Vswitch can
leverage DMA device to accelerate vhost async dequeue path.
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch implements asynchronous dequeue data path for vhost split
ring, a new API rte_vhost_async_try_dequeue_burst() is introduced.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch introduces new APIs for the application
to query and reset per-virtqueue statistics. The
patch also introduces generic counters.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Since QEMU 5.2.0 fixes the vhost split ring multi-queue reconnection
issue in commit f66337bdbfda ("vhost-user: save features of multiqueues
if chardev is closed"), this patch updates known issue to indicate
the range of affeacted QEMU versions.
Fixes: b37e95507e1b ("doc: add vhost multi-queue reconnection issue")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The port ownership concept was introduced in ethdev in DPDK 18.02.
Not sure it is used by applications except those using failsafe or netvsc.
It can also be used by libraries or applications to sort out
how ports are controlled.
Hiding sub-ports controlled by failsafe or netvsc look to be enough
justification to promote this API as stable.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8636 Rev 2.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8472 Rev 12.0
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8079 Rev 1.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a new telemetry command /ethdev/module_eeprom to dump the module
EEPROM of each port. The format of module EEPROM information follows
the SFF(Small Form Factor) Committee specifications.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
VMXNET3 version 6 supports some new features, including but not limited to:
- Increased maximum MTU up to 9190
- Increased maximum number of Rx and Tx queues
- Removes power-of-two limitations on queue sizes
- Extended interrupt structures (required for additional queues)
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Add RETA query and RETA update support for VMXNET3.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Currently, meter object supports only DSCP based on input color table,
The patch enhance that to support VLAN based input color table,
color table based on inner field for the tunnel use case, and
support for fallback color per meter if packet based on a different field.
All of the above features are exposed through capability and added
additional capability to specify the implementation supports
more than one input color table per ethdev port.
Suggested-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support to read firmware configuration file from
/lib/firmware/cxgb4/ path in the filesystem. The firmware
config file is used to enable or disable NIC features before
firmware initialization to help retrieve better debug data to
analyze firmware init failures. The config file can also
be used to redistribute resources, like queues, TCAMs, etc.,
from disabled physical functions (PFs) to main PF, before
firmware init.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add CLI options to l3fwd_power to utilize the new power APIs introduced in
this patchset. These CLI options allow the user to configure the
heuritstics made available through the new API via the l3fwd_power
application options.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add new get/set API to allow the user or application to set the minimum
and maximum frequencies to use when scaling.
Previously, the frequency range was determined by the HW capabilities of
the CPU. With this new API, the user or application can constrain this
if required.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set API for configuring 'pause_duration' which used to adjust
the pause mode callback duration.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Add new get/set APIs to configure emptypoll max which is used to
determine when a queue can go into sleep state.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: David Hunt <david.hunt@intel.com>
Add an implementation of the rte_lpm_lookupx4() function for platforms
without support for vector operations.
This will be useful in the upcoming RISC-V port as well as any platform
which may want to start with a basic level of LPM support.
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
- Added elliptic curve Diffie-Hellman parameters.
Point multiplication allows the user to process every phase of
ECDH, but for phase 1, user should not really care about the generator.
The user does not even need to know what the generator looks like,
therefore setting ec xform would make this work.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
ipsec-secgw application is updated to support
DES-CBC ciphering and XCBC-MAC authentication
based IPsec functionality.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add notes on list of algorithms supported for ACVP FIPS validation.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Jakub Poczatek <jakub.poczatek@intel.com>
This commit enables asymmetric crypto in generation four
devices (4xxx).
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Using crypto devs requires the user to log in and the supplied DEK to be
encrypted with a KEK (keys encryption key).
KEK is burned once on the nic, along with credentials for users,
and for a user to log in, he is needed to supply his creds wrapped with
the KEK.
A device comes out of the Mellanox factory with a pre-defined import
method for each algorithm. The defined method could be wrapped
mode, so the device can be used as described above, or
plaintext mode, without the need to log in and wrap supplied DEKs.
Support crypto operations with the plaintext import method.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The AltiVec header file is defining "vector", except in C++ build.
The keyword "vector" may conflict easily.
As a rule, it is better to use the alternative keyword "__vector".
The DPDK header file rte_altivec.h takes care of undefining "vector",
so the applications and dependencies are free to define the name "vector".
This is a compatibility breakage for applications which were using
the keyword "vector" for its AltiVec meaning.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The rte_pcapng_init function doesn't exist, so remove it from the docs.
Also fix minor mistakes in the file.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Shell used in documentation generation could not run on Windows.
Rewrite scripts in Python.
New scripts use proper path separators and handle paths with spaces.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
API documentation index had spaces between link caption and URL,
which may be unsupported by some Markdown implementations.
That is, "[caption](URL)" is valid but "[caption] (URL)" is not.
The problematic behavior is observed with Doxygen on Windows.
Remove the spaces.
Unfortunately, Markdown syntax is not formally specified.
Fixes: 9bf486e606b0 ("doc: generate HTML for API with doxygen")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
CSS for API documentation was customized by a shell script
modifying the file that Doxygen produces.
This way CSS code is kept in a script and an extra build step is added.
Move custom style to a plain CSS file.
Use Doxygen capability to attach this extra stylesheet.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This patch support copy, submit, completed and
completed status functionality of DMA driver.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add additional PMD APIs for DPAA2 QDMA driver for configuring
RBP, Ultra Short format, and Scatter Gather support
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DPAA2 DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
Earlier this was part of RAW driver, but with DMA drivers
added as separate flavor of drivers, this driver is being
moved to DMA drivers.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With DMA devices supported as a separate flavor of devices,
the DPAA2 QDMA driver is moved in the DMA devices.
This change removes the DPAA2 QDMA driver from raw devices.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added API to set queue attributes at runtime and API to get weight and
affinity.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Extended eventdev queue QoS attributes to support weight and affinity.
If queues are of the same priority, events from the queue with highest
weight will be scheduled first. Affinity indicates the number of times,
the subsequent schedule calls from an event port will use the same event
queue. Schedule call selects another queue if current queue goes empty
or schedule count reaches affinity count.
To avoid ABI break, weight and affinity attributes are not yet added to
queue config structure and rely on PMD for managing it. New eventdev op
queue_attr_get can be used to get it from the PMD.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
