This patch added the support for VF to config the ETS-based Tx QoS,
including querying current QoS configuration from PF and config queue TC
mapping. PF QoS is configured in advance and the queried info is
provided to the user for future usage. VF queues are mapped to different
TCs in PF through virtchnl.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch supports the ETS-based QoS configuration. It enables the DCF
to configure bandwidth limits for each VF VSI of different TCs. A
hierarchy scheduler tree is built with port, TC and VSI nodes.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a specific path for RX AVX2.
In this path, support the HW offload features, like,
checksum, VLAN stripping, RSS hash.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
Patch adds multicast filter support for cn9k and cn10k platforms.
CGX DMAC filter table(32 entries) is divided among all LMACs
connected to it i.e. if CGX has 4 LMACs then each LMAC can have
up to 8 filters. If CGX has 1 LMAC then it can have up to 32
filters.
Above mentioned filter table is used to install unicast and multicast
DMAC address filters. Unicast filters are installed via
rte_eth_dev_mac_addr_add API while multicast filters are installed
via rte_eth_dev_set_mc_addr_list API.
So in total, supported MAC filters are equal to DMAC filters plus
mcast filters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Adding initial version of rte_flow support for cnxk family device.
Supported rte_flow ops are flow_validate, flow_create, flow_destroy,
flow_flush, flow_query, flow_isolate.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Application may choose to enable/disable interrupts on Rx queues
so that application can select its processing if no packets are
available on queues for a longer period.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Add device start and stop operation callbacks for
CN9K and CN10K. Device stop is common for both platforms
while device start as some platform dependent portion where
the platform specific offload flags are recomputed and
the right Rx/Tx burst function is chosen.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for packet type lookup on Rx to translate HW
specific types to RTE_PTYPE_* defines
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
aDD tx queue setup and release for CN9K and CN10K.
Release is common while setup is platform dependent due
to differences in fast path Tx queue structures.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx queue setup and release op for CN9K and CN10K
SoC. Release is completely common while setup is platform
dependent due to fast path Rx queue structure variation.
Fastpath is platform dependent partly due to core cacheline
size difference.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add device configuration op for CN9K and CN10K. Most of the
device configuration is common between two platforms except for
some supported offloads.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add various devargs parsing command line arguments
parsing functions supported by CN9K and CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add build infrastructure and common probe and remove for cnxk driver
which is used by both CN10K and CN9K SoC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for performing selftest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Custom IRQ handlers may be registered/removed on demand.
Since registration and removal are related they are in the
same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Allow user to retrieve baseband phy memory resources.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for interrupt initialization and cleanup. Internally
interrupt initialization performs low level setup that allows
custom interrupt handler registration later on.
Interrupt initialization and cleanup are related hence they
are in the same patch.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for performing selftest operation.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enqueueing messages.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading number of available queues i.e number
of available logical macs (LMACs).
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add baseband PHY CGX/RPM skeleton driver which merely probes a matching
device. CGX/RPM are Ethernet MACs hardwired to baseband subsystem.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Auxiliary bus [1] provides a way to split function into child-devices
representing sub-domains of functionality. Each auxiliary device
represents a part of its parent functionality.
Auxiliary device is identified by unique device name, sysfs path:
/sys/bus/auxiliary/devices/<name>
Devargs legacy syntax of auxiliary device:
-a auxiliary:<name>[,args...]
Devargs generic syntax of auxiliary device:
-a bus=auxiliary,name=<name>/class=<class>/driver=<driver>[,args...]
[1] kernel auxiliary bus document:
https://www.kernel.org/doc/html/latest/driver-api/auxiliary_bus.html
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The string copy api rte_strscpy() did not set rte_errno during failures,
instead it just returned negative error number.
Set rte_errrno if the destination buffer is too small.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Default burst size in testpmd has been changed from 16 to 32
for some time now. But the documentation had not been updated.
Fixes: 836853d3d4cf7 ("app/testpmd: increase default burst size to 32")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A stray character got added. Remove it.
Fixes: cb056611a8ed ("eal: rename lcore master and slave")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Start a new release cycle with empty release notes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
