The expression (192 << 24) has an undefined behavior since:
- the integer constant 192 has type int, and
- 192 x 2^24 is not representable as an int.
Suffixing 192 with U defines a behavior since:
- the integer constant 192U has type unsigned int, and
- the value of (192U << 24) is defined as
(192 x 2^24) % (UINT_MAX + 1)
This minor bug was found using TrustInSoft Analyzer.
Signed-off-by: Julien Cretin <julien.cretin@trust-in-soft.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When NUMA is enabled, the mbuf pool pointer of per-core fwd_lcores structure
is not set, causing a crash when accessing to mbp for txonly burst.
Initialize fwd_lcore after allocating NUMA memory pools.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Now socket id is from device's numa_node, if it is invalid, just set it to 0
as default to avoid crash which will be caused by the reference to
port_per_socket[socket_id].
Also one warning is displayed to user that port-numa-config and
ring-numa-config parameters should be used along with --numa for NUMA mode.
A check for NUMA_NO_CONFIG was also missing from init_fwd_stream().
Signed-off-by: Liu Xiaofeng <xiaofeng.liu@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Instead of having a list of virtual device drivers in EAL code, add an
API to register drivers. Thanks to this new registration method, we can
remove the references to pmd_ring, pmd_pcap and pmd_xenvirt in EAL code.
This also enables the ability to register a virtual device driver as
a shared library.
The registration is done in an init function flaged with
__attribute__((constructor)). The new convention is to name this
function rte_pmd_xyz_init(). The per-device init function is renamed
rte_pmd_xyz_devinit().
By the way the internal PMDs are now also .so/standalone ready. Let's do
it later on. It will be required to ease maintenance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Copy all the dump commands provided in app/test into app/testpmd. These
commands are useful to debug a problem when using testpmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit splits the "--use-device" option in two new options:
- "--pci-whitelist or -w": add a PCI device in the white list
- "--vdev": instanciate a new virtual device
Before the patch, the same option "--use-device" was used for these 2
use-cases.
By the way, we also add "--pci-blacklist" in addition to the existing
"-b" for coherency with the whitelist parameter.
Test result:
echo 100 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
echo 100 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
./app/test -c 0x15 -n 3 -m 64
RTE>>eal_flags_autotest
[...]
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit changes the API of --use-device command line argument.
It changes the separators from ';' to ','. Indeed, ';' is not the best
choice as this character is also used to separate shell commands,
forcing the user to surround arguments with quotes.
This commit impacts both devargs and kvargs as each of them define
a separator in --use-device argument:
- devargs defines the separator between the device name or pci_id and
its arguments
- kvargs defines the separator between each key/value pairs in
arguments for drivers using the kvargs API to parse their arguments
The modification of devargs and kvargs is done in one commit to keep
the coherency of --use-device.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove old whitelist code:
- remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in
is_valid_wl_entry() as we want to be able to register external virtual
drivers as a shared library. Moreover this code was duplicated with
dev_types[] from eal_common_pci.c
- eal_common_whitelist.c was badly named: it was able to process PCI
devices white list and the registration of virtual devices
- the parsing code was complex: all arguments were prepended in
one string dev_list_str[4096], then split again
Use the newly introduced rte_devargs to get:
- the PCI white list
- the PCI black list
- the list of virtual devices
Rework the tests:
- a part of the whitelist test can be removed as it is now tested
in app/test/test_devargs.c
- the other parts are just reworked to adapt them to the new API
This commit induce a small API modification: it is not possible to specify
several devices per "--use-device" option. This notation was anyway a bit
cryptic. Ex:
--use-device="eth_ring0,eth_pcap0;iface=ixgbe0"
now becomes:
--use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0"
On the other hand, it is now possible to work in PCI blacklist mode and
instanciate virtual drivers, which was not possible before this patch.
Test result:
./app/test -c 0x15 -n 3 -m 64
RTE>>devargs_autotest
EAL: invalid PCI identifier <08:1>
EAL: invalid PCI identifier <00.1>
EAL: invalid PCI identifier <foo>
EAL: invalid PCI identifier <>
EAL: invalid PCI identifier <000f:0:0>
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit introduces a new API for storing device arguments given by
the user. It only adds the framework and the test. The modification of
EAL to use this new module is done in next commit.
The final goals:
- unify pci-blacklist, pci-whitelist, and virtual devices arguments
in one file
- allow to register a virtual device driver from a dpdk extension
provided as a shared library. For that we will require to remove
references to rte_pmd_ring and rte_pmd_pcap in argument parsing code
- clarify the API of eal_common_whitelist.c, and rework its code that is
often complex for no reason.
- support arguments for PCI devices and possibly future non-PCI devices
(other than virtual devices) without effort.
Test result:
echo 100 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
echo 100 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
./app/test -c 0x15 -n 3 -m 64
RTE>>eal_flags_autotest
[...]
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
To avoid confusion with virtual devices, rename device_list as
pci_device_list and driver_list as pci_driver_list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The entries for the configuration of the reception and of the transmission
of pause frames are inverted in the mode conversion array.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive mode
- ethernet address parsing
Note: ethernet address parsing could be rewritten without cmdline dependency.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not needed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Use pcap-config to populate CFLAGS and LDFLAGS.
LIBPCAP_CFLAGS and LIBPCAP_LDFLAGS can be used to override this (useful when
cross-compiling).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add into the `rte_eth_stats` data structure 4 (64-bit) counters
of XOFF/XON pause frames received and sent on a given port.
Update em, igb, and ixgbe drivers to return the value of the 4 XOFF/XON
counters through the `rte_eth_stats_get` function exported by the DPDK
API.
Display the value of the 4 XOFF/XON counters in the `testpmd` application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since DPDK 1.4, if RTE_EAL_UNBIND_PORTS is disabled, igb_uio mapping is
done for all devices (commit eee16c964c), breaking some non-Intel drivers.
But pci_uio_map_resource() should only be called for Intel devices
(using igb_uio kernel module).
The flag RTE_PCI_DRV_NEED_IGB_UIO is set for all those devices, even when
RTE_EAL_UNBIND_PORTS is disabled (fixes commit a22f5ce8fc).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Add a file app/test/test_kvargs.c that checks the rte_kvargs API.
The test passes:
RTE>>kvargs
== test valid case ==
== test invalid case ==
PMD: Error parsing device, invalid key <wrong-key>
Test OK
I also tested that rte_eth_pcap runs with the following arguments:
./app/testpmd -c 0x15 -n 3 --proc-type=primary --huge-dir=/mnt/huge \
--use-device="eth_pcap0;iface=ixgbe0" \
-- -i --port-topology=chained
./app/testpmd -c 0x15 -n 3 --proc-type=primary --huge-dir=/mnt/huge \
--use-device="eth_pcap0;rx_iface=ixgbe0;rx_iface=ixgbe1;tx_iface=ixgbe0" \
-- -i --port-topology=chained
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding or subtracting a value to a pointer makes a new pointer
of unknown type.
So typeof() is replaced by (void*) in RTE_PTR_ADD() and RTE_PTR_SUB().
But RTE_PTR_ALIGN_* macros have in their explicit API to return a pointer
of the same type. Since RTE_PTR_ALIGN_CEIL is based on RTE_PTR_ADD, a
typeof() is added to keep the original behaviour.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Hardware does not support RSS in SRIOV setups.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
The mq_mode was not set when rxq is > 0; it's defaulted to ETH_MQ_RX_NONE.
As a result, RSS remains inactive. The fix is to set mq_mode to ETH_MQ_RX_RSS
when hf is non-zero.
This bug was introduced by commit 243db2ddee
igb/ixgbe: ETH_MQ_RX_NONE should disable RSS
Signed-off-by: Daniel Kan <dan@nyansa.com>
Acked-by: Maxime Leroy <maxime.leroy@6wind.com>
This adds a new forwarding mode to testpmd, whereby it will forward
packets, but on a transmit failure, it will wait a small amount of time
before retrying the transmit again. This mode can be useful in some
cases to set a zero-packet loss rate at the cost of overall throughput,
especially in cases where TX ring size/buffering is constrained, such as
with virtio.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
* Change behaviour to spread the memory specified across all sockets
rather than duplicating the memory for each one. This way the memory
size specified is the total memory needed by the test.
* Minor reordering of test cases, to ensure that ring autotest is the
final test run.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
It's no longer possible to run all autotests in
a single go and have them pass, so remove that option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Minor chanes including replacing local DIM macro with more standard
RTE_DIM macro from rte_common.h.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
don't compile the timer autotests unless timer library is turned on in
the compile-time configuration.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Minor fixes/updates to the autotest app, including:
* replace hard-coded values with #defines in rte_power.h
* replace local DIM() macro with common RTE_DIM
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These library changes provide a new Intel DPDK feature for communicating
with virtual machines using QEMU's IVSHMEM mechanism.
The feature works by providing a command line for QEMU to map several hugepages
into a single IVSHMEM device. For the guest to know what is inside any given IVSHMEM
device (and to distinguish between Intel(R) DPDK and non-Intel(R) DPDK IVSHMEM
devices), a metadata file is also mapped into the IVSHMEM segment. No work needs to
be done by the guest application to map IVSHMEM devices into memory; they are
automatically recognized by the Intel(R) DPDK Environment Abstraction Layer (EAL).
Changes in this patch:
* Changes to EAL to allow mapping of all hugepages in a memseg into a single file
* Changes to EAL to allow ivshmem devices to be transparently mapped in
the process running on the guest.
* New ivshmem library to create and manage metadata exported to guest VM's
* New ivshmem compilation targets
* Mempool and ring changes to allow export of structures to a VM and allow
a VM to attach to those structures.
* New autotests to unit tests this functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For certain functionality, e.g. Xen Dom0 support, it is required that
we can guarantee that memzones for descriptor rings won't cross 2M
boundaries. So add new memzone reserve function where we can pass in a
boundary condition parameter.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Changes to allow compilation and use on FreeBSD. Includes:
* contigmem and nic_uio driver for FreeBSD
* new EAL instance
* new "bsdapp" compilation target
* various compilation fixes due to differences between linux and freebsd
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This application is built if LIBRTE_CMDLINE is enabled.
But there was no enabled source file if APP_TEST is disabled.
Let's consider that CONFIG_RTE_APP_TEST apply only on app/test.
Signed-off-by: Intel
GCC 4.8 was producing this error:
argument to ‘sizeof’ in ‘strncmp’ call is the same expression as the
second source; did you mean to provide an explicit length?
[-Werror=sizeof-pointer-memaccess]
Signed-off-by: Intel
Need to change PCI code to support multiple I/O regions on a single device.
Some devices like VMXNET3 have multiple PCI memory regions, and some
have none.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Intel
Fix warnings of type "Value stored to 'xxx' is never read".
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When a memory address must be read, for instance a [mapped] PCI register,
the read value is assigned to a local variable that is not used after,
as for instance:
x = *((uint8_t *) mem_addr);
Such instructions do not compile with gcc 4.6.
The fix consists in adding the "volatile" attribute to the accessed data type
and to not assign the read value:
*((volatile uint8_t *) mem_addr);
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Build mbuf and lists of mbufs in a way compliant with the checks performed
by the function __rte_mbuf_sanity_check() when CONFIG_RTE_LIBRTE_MBUF_DEBUG=y
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
A chained topology must always have an increment of 1.
Here, it was 2 if ports number is even.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
test-pmd txonly leaks mbuf from the pool.
The function tx_mbuf_alloc() does not change the refcnt
and the refcnt is 0 when it is first allocated.
However, rte_pktmbuf_free_seg called by the driver's xmit code decrements
reference count to -1. So mbuf never goes back to the pool.
As a result, txonly can't send packets after it exhausts the mempool.
The function tx_mbuf_alloc() was getting mbuf directly from mempool and so
was bypassing mbuf API.
The dedicated function is rte_pktmbuf_alloc() but it is much slower because
it does unnecessary initializations in rte_pktmbuf_reset().
By using the internal API __rte_mbuf_raw_alloc(), refcnt is correctly handled
without adding too much overload.
Signed-off-by: Dongsu Han <dongsuh@cs.cmu.edu>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
