Update copyright year in various files.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Add support for DEV_TX_OFFLOAD_MBUF_FAST_FREE to bnxt
vector mode transmit. This offload may be enabled
only when multi-segment transmit is not needed, all
transmitted mbufs for a given queue will be allocated
from the same pool, and all transmitted mbufs will
have a reference count of 1.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Increase the maximum supported burst size for the bnxt vector
mode PMD from 32 to 64.
With larger burst sizes, per-burst overhead is amortized over more
packets, improving overall performance. For small packets this has
been measured to provide a 4-10% increase in single-core throughput
with testpmd iofwd.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Improve support for small ring sizes:
- Ensure that transmit free threshold is no more than 1/4 ring size.
- Ensure that receive free threshold is no more than 1/4 ring size.
- Validate requested ring sizes against minimum supported size.
- Use rxq receive free threshold instead of fixed maximum burst
size to trigger bulk receive buffer allocation.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Currently, the flow_ids of port_to_app/app_to_port & tx_cfa_action
for the first port are getting over-written by the second port because
these fields are stored in the ulp context which is common across the
ports.
This patch fixes the problem by having per port structure to store these
fields.
Fixes: 9f702636d7 ("net/bnxt: add port default rules for ingress and egress")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Invoked 3 new APIs for the default flow create/destroy and to get
the action ptr for a default flow.
Changed ulp_intf_update() to accept rte_eth_dev as input and invoke
the same from the VF rep start function.
ULP Mark Manager will indicate if the cfa_code returned in the
Rx completion descriptor was for one of the default flow rules
created for the VF representor conduit. The mark_id returned
in such a case would be the VF rep's DPDK Port id, which can be
used to get the corresponding rte_eth_dev struct in bnxt_vf_recv
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Thor queue scaling is currently limited by the number of NQs that
can be allocated. Fix by using a common NQ for all receive/transmit
rings instead of allocating a separate NQ for each ring.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Driver should not change "deferred_start" state of the tx queues.
It should get the state in queue_setup_op() and use that value.
Since the deferred start state was being used in the packet transmit
functions to determine whether the queue has been stopped already,
introduced a per-txq flag to track queue stopped/started state.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
This commit adds support to the bnxt PMD for devices
based on the BCM57508 "thor" Ethernet controller.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
The driver currently uses rte_pktmbuf_free() to free each mbuf
after transmit completion. This is optimized to free multiple
mbufs using rte_mempool_put_bulk().
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
This patch addresses the following issues with Tx batching:
1. Tx stall observed in some conditions:
The batching code doesn't request for a completion when only a partial
chain of packets is transmitted due to mbuf allocation errors. Because
of this, Tx consumer index is not updated correctly and it eventually
leads to qfull condition. Fix this by requesting a completion for the
last packet in the partial chain that is transmitted successfully.
2. Tx stall seen with Jumbo frames:
With jumbo frames, number of TxBDs is > 1. While setting up these
additional BDs in bnxt_start_xmit(), the flags field is being set using
the OR-assignment operator. We end up using a stale value of the flags
field (from a previous use of that descriptor). This results in an
invalid completion and eventually leads to tx stall. Fix this to just
assign the flags field with the right value.
Fixes: 5735eb2419 ("net/bnxt: support Tx batching")
Cc: stable@dpdk.org
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Batch more than one Tx requests such that only one completion
is generarted by the HW. We request a Tx completion for first
and last Tx request in the batch.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are still using the txq_flags which is no longer needed with the
new offload API. Cleaning it up.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Since we are storing the mem_zone address for each ring created,
we are freeing the same address multiple times.
For example the memory zone created for Rx is being freed during
Rx ring cleanup, AGG ring cleanup and CQ cleanup.
Avoid this by storing the memory zone address in RXQ instead and
free it as a part of queue_release dev_op.
In the same way do the same for TX queues as well.
Fixes: 51c87ebafc ("net/bnxt: add Tx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently this is implemented entirely in the PMD as there is no
explicit support in the HW. Re-program the RSS Table without this queue
on stop and add it back to the table on start.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In this patch we are adding the bnxt_tx_queue_setup_op() and
bnxt_tx_queue_release_op() functions. These will be tied to the
tx_queue_setup and tx_queue_release dev_ops in a subsequent patch.
In these functions we allocate/free memory for the TX queues.
This still requires support to create a TX ring in the ASIC which
will be completed in a future commit. Each Tx queue created via the
tx_queue_setup dev_op will have an associated Tx ring in the hardware.
A Tx request coming on the Tx queue gets sent to the corresponding
Tx ring in the ASIC for subsequent transmission.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
