When close one port twice, testpmd will give out wrong messagse.
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 0 Mbps - full-duplex
Port 1 Link Up - speed 0 Mbps - full-duplex
Done
testpmd> port close 0
Closing ports...
Done
testpmd> port close 0
Closing ports...
Port 0 is now not stopped
Done
testpmd>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
In testpmd, when using "rx_vlan add 1 77", it will be a segment fault
Because the port ID should be less than 32.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Make thash library arch-independent.
Leave unaligned union rte_thash_tuple if no support for SSE3.
Makes 32bit compiler happy by adding ULL suffix.
Signed-off-by: Vladimir Medvedkin <medvedkinv@gmail.com>
oerrors was txdgpc - hw_stats->gptc,
txdgpc is the number of packets DMA'ed by the host
and was being reset on every call to read stats so it could be < gptc.
Because we currently have no way to add txdgpc to struct hw_stats so
that we can maintain a persistent value per port oerrors has now been
set to 0. References to txdgpc is now removed as we don't use it. This
patch also removes rxnfgpc as it's not used anywhere.
Fixes: afebc86be134 ("ixgbe: refactor stats register reads")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For 2.1 release, in attempt to minimize number of RX routines to support,
ixgbe scatter and ixgbe LRO RX routines were merged into one
that can handle both cases.
Though I completely missed the fact, that while LRO could only be used
when HW CRC strip is enabled, scatter RX should work for both cases
(HW CRC strip on/off).
That patch restores missed functionality.
Fixes: 9d8a92628f21 ("ixgbe: remove simple scalar scattered Rx method")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. cpu use data owned by ixgbe must use rte_le_to_cpu_xx(...)
2. cpu fill data to ixgbe must use rte_cpu_to_le_xx(...)
3. checking pci status with converted constant
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the issue:
Testpmd crashed with Segmentation fault when setup tx queues on vf
Steps for reproduce:
- create one vf device from i40e driver
- bind vf device to igb_uio and start testpmd
With debugging tools, we saw the struct i40e_vf is cleared after
memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf)) in
rte_eth_dev_configure, which should not happen, and the pointer to
i40e_vf isn't in the range of i40e_adapter.
The root cause is the dev_private_size in i40e virtual function driver
struct rte_i40evf_pmd was set incorrectly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Build log:
lib/librte_eal/common/eal_common_pci.c:188:4: error:
implicit declaration of function pci_config_space_set
The function rte_eal_pci_probe_one_driver, which calls
pci_config_space_set, was moved to eal_common_pci.c,
but pci_config_space_set was left in eal_pci.c with static specifier.
Fixes: 4d4ebca4 ("pci: merge probing and closing functions for linux and bsd")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
This driver has too many issues:
- too big
- bad coding style
- no git history (dropped in 2 patches)
- no documentation
- no BSD support
- no maintainer
And the biggest one, constraining this disabling:
- many build issues
If the last 4 issues are not fixed in the next release 2.2,
the driver must be removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When adding with cuckoo hash a key which was already inserted
a new slot is dequeued and then enqueued back, but the enqueue
operation was not done properly.
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The BSD function for contigmem init and attach must now use the same name
as Linux (hugepage prefix) to avoid code duplication.
The attach function was renamed but the init function was forgotten.
Fixes: d12b6da14bfa ("eal: deduplicate memory initialization")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a VXLAN sample guide in the sample_app_ug directory.
It includes:
- Add the overlay networking picture with svg format.
- Add the TEP termination framework picture with svg format.
- Add the tep_termination.rst file
- Change the index.rst file for the above pictures index.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
Add a comment for outer-ip option in csum command.
Set outer-ip option only when the packet is a IPv4 packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
The patch demonstrates how to handle per rx queue interrupt in a NAPI-like
implementation in userspace. The working thread mainly runs in polling mode
and switch to interrupt mode only if there is no packet received in recent polls.
The working thread returns to polling mode immediately once it receives an
interrupt notification caused by the incoming packets.
The sample keeps running in polling mode if the binding PMD hasn't supported
the rx interrupt yet. Now only ixgbe(pf/vf) and igb support it.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch does below for igb PF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch does below things for ixgbe PF and VF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch exposes intr event fd create and release for PMD.
The device driver can assign the number of event associated with interrupt vector.
It also provides misc functions to check 1) allows other slowpath intr(e.g. lsc);
2) intr event on fastpath is enabled or not.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The intr handle type(RTE_INTR_HANDLE_UIO_INTX) was introduced by UIO pci generic.
When turning on the lsc interrupt, it complains fd read error.
The patch uses the correct read size in the case of RTE_INTR_HANDLE_UIO_INTX.
Fixes: 3f313bef3467 ("eal/linux: fix irq handling with igb_uio")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch maps each of the eventfd to the interrupt vector of VFIO MSI-X.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch adds 'rte_intr_rx_ctl' to add or delete interrupt vector
events monitor on specified epoll instance.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch adds 'rte_epoll_wait' and 'rte_epoll_ctl' for async event wakeup.
It defines 'struct rte_epoll_event' as the event param.
When the event fds add to a specified epoll instance, 'eptrs' will hold
the rte_epoll_event object pointer.
The 'op' uses the same enum as epoll_wait/ctl does.
The epoll event support to carry a raw user data and to register a callback
which is executed during wakeup.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch adds interrupt vectors support in rte_intr_handle.
'vec_en' is set when interrupt vectors are detected and associated
event fds are set. Those event fds are stored in efds[].
'intr_vec' is reserved for device driver to initialize the vector
mapping table.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
When the bonded port is started it also starts the slave port,
but the slave port status is not set. A slave_flag has been
added to struct rte_port to resolve this issue.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the link bonding pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
With the new hash implementation, the minimum lookup burst size
to get good performance is 8, since its internal pipeline
consists of 4 stages of 2 entries each, so to avoid
duplication, burst size should be 8 or more entries.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes parsing value of core variable in pipeline config.
Before not every combination of cores (c), sockets (s) and
hyperthreading (h) was parsed correctly.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As Steve pointed out, the commit 11b220c6498d ("ixgbe: fix release queue mbufs")
is not complete.
As at queue stop we don't reset vector related rx queue fields to their
initial values.
Fixes: c95584dc2b18 ("ixgbe: new vectorized functions for Rx/Tx")
Reported-by: Cunming Liang <cunming.liang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The missing header prevents to build with linux v3.18.
The problem is with kzalloc and kfree which are undefined in the igb_uio
driver.
HOSTCC="/usr/bin/gcc" HOSTCFLAGS="" ARCH=arm
RTE_TARGET=arm-armv7-a-linuxapp-gcc
CROSS=arm-none-linux-gnueabi-
lib/librte_eal/linuxapp/igb_uio/igb_uio.c:
error: implicit declaration of function 'kzalloc'
error: implicit declaration of function 'kfree'
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
fm10k has the capability to do checksum offload in TX side. This
change will expose the capability to application in infos_get
function.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
When reverting the max queues per port to fix an ABI breakage,
the BSD config was forgotten.
Fixes: 94c6cba001ae ("config: revert the max queues per port to 256")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix error where TSC freq is 0.
The logical OR operator evaluates to 1 if any of its operands is
different than 0.
Error showed later while initializing PMD:
EAL: TSC frequency is ~0 KHz
<snip>
PMD: eth_ixgbe_dev_init(): Hardware Initialization Failure: -30
EAL: Error - exiting with code: 1
Cause: Requested device 0000:84:00.0 cannot be used
Fixes: 040cf8a41187 ("eal: deduplicate timer functions")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch depends on the Port Hotplug Framework.
It implements the rte_dev_uninit_t() function for the ring pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.ruchardson@intel.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
More code for the Broadcom/Qlogic NetExtreme II poll mode driver.
Split into pieces for review and not to overwhelm mailers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
This is the first of several parts for a new driver supporting
Broadcom/Qlogic NetXtremeII 10 gigabit devices.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
Some drivers need ability to access PCI config (for example for power
management). This adds an abstraction to do this for both Linux
and BSD.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
Move common functions from BSD/Linux to eal_common_memory.c file.
BSD uses contigmem kernel module and Linux uses /proc/self/pagemap file.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move common functions from BSD/Linux to eal_common_timer.c.
BSD uses sysctl and Linux uses CLOCK_MONOTIC_RAW to calibrate TSC.
HPET is specific to Linux and not integrated in the common init.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: move inclusion used by ixgbe bypass]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
