Currently, EAL does not distinguish between actual failures and expected
initialization errors. E.g. sometimes the driver fails to initialize
because it was not supposed to be initialized in the first place, such
as device not being managed by said driver.
This patch makes EAL fail on actual initialization errors while still
skipping over expected initialization errors.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Separating mapping code and calls to open. This is a preparatory work
for VFIO patch since it'll need to map BARs too but it doesn't use path
in mapped_pci_resource. Also, renaming structs to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This makes it possible to run DPDK without hugepage memory when VFIO
is used, as VFIO uses virtual addresses to set up DMA mappings.
Technically, malloc is just fine, but we want to guarantee that
memory will be page-aligned, so using mmap to be safe.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
eal_hpet.c was renamed to eal_timer.c and, thanks to code changes, does
not need the -Wno-return-type any more.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
Allows to lookup four IP addresses in an LPM table.
Uses SSE instrincts.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add __rte_unused to
pci_unbind_kernel_driver(struct rte_pci_device *dev)
Signed-off-by: Alan Carew <alan.carew@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Recent change to rte_dump_tailq (commit 591a9d7985),
which now uses a FILE parameter causes compilation to fail under FreeBSD
and sourced to a missing include of stdio.h.
Errors:
rte_tailq.h: unknown type name 'FILE' void rte_dump_tailq(FILE *f);
rte_memory.h: unknown type name 'FILE' void rte_dump_physmem_layout(FILE *f);
Signed-off-by: Alan Carew <alan.carew@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The unit of allocated_size is MB, so the change below is made.
Otherwise, it will fail to free memory when available memory is not enough.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
Since Linux kernel version 3.13.0,
the xen_create/destroy_contiguous_region() API has been changed,
and the first parameter is physical address in the API.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Tested-by: Heng Ding <hengx.ding@intel.com>
The patch changes the way of reserving memory in Dom0 driver.
It will reserve memory at installing rte_dom0_mm.ko kernel module
instead of requesting memory dynamically during DPDK application startup.
Meanwhile, now driver requests memory size of 4M once first,
if it failed, and request memory size of 2M once.
The main reasons for these changes are as follows:
First, to reduce the impact of increasing in memory fragment
after system run a long time.
Second, to reduce number of memory segment.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds API to support queue start and stop functionality for RX/TX.
It allows RX and TX queue is started or stopped one by one, instead of starting
and stopping all of them at the same time.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Error of "implicit-function-declaration" can be seen when building KNI
kernel module on Linux kernel 3.6.10 platform, as follows.
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
In function igb_get_eee:
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
2441:4: error: implicit declaration of function
mmd_eee_adv_to_ethtool_adv_t
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
In function igb_set_eee:
lib/librte_eal/linuxapp/kni/igb_ethtool.c:
2551:2: error: implicit declaration of function
ethtool_adv_to_mmd_eee_adv_t
The root cause is as follows.
On Fedora 18 with kernel 3.6.10, ETHTOOL_GEEE is defined in Linux
header file of "linux/ethtool.h", while is not defined in most of other
linux kernel versions.
mmd_eee_cap_to_ethtool_sup_t(), mmd_eee_adv_to_ethtool_adv_t() and
ethtool_adv_to_mmd_eee_adv_t() in kcompat.h are disabled by "#if
!defined(ETHTOOL_GEEE) || (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE <=
RHEL_RELEASE_VERSION(6,4))", while are called in igb_get_eee() in
igb_ethtool.c which is enabled by "#ifdef ETHTOOL_GEEE".
Reported-by: Prashant Upadhyaya <prashant.upadhyaya@aricent.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There was an indentation error in commit e57f20e051
"make vdev init path generic for both virtual and pci devices"
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, physical device pmds use a separate initalization path
(rte_pmd_init_all) while virtual devices use a constructor registration and
rte_eal_dev_init. Theres no reason to have them be separate. This patch
removes the vdev specific nomenclature from the vdev init path and makes it more
generic for use with all pmds. This is the first step in converting the
physical device pmds to using the same constructor based registration path that
the virtual devices use.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rather than have each driver have to remember to add a constructor to it to make
sure its gets registered properly, wrap that process up in a macro to make
registration a one line affair. This also sets the stage for us to make
registration of vdev pmds and physical pmds a uniform process
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When doing diagnostic function, it is useful to have a ability
to iterate over all memzones.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It makes no sense to inline string functions, in fact snprintf
can't be inlined because the function supports variable number of
arguments.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: update includes]
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, if there is more memory in hugepages than the amount
requested by dpdk application, the memory is allocated by taking as much
memory as possible from each socket, starting from first one.
For example if a system is configured with 8 GB in 2 sockets (4 GB per
socket), and dpdk is requesting only 4GB of memory, all memory will be
taken in socket 0 (that have exactly 4GB of free hugepages) even if some
cores are configured on socket 1, and there are free hugepages on socket
1...
Change this behaviour to allocate memory on all sockets where some cores
are configured, spreading the memory amongst sockets using following
ratio per socket:
N° of cores configured on the socket / Total number of configured cores
* requested memory
If this new algorithm fails, it defaults to previous behaviour.
This algorithm is used when memory amount is specified globally using
-m option. Per socket memory allocation can always be done using
--socket-mem option.
It is implemented only for Linux as BSD part looks not to be ready for NUMA.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Venky Venkatesan <venky.venkatesan@intel.com>
RTE_EAL_UNBIND_PORTS was deprecated in DPDK 1.4.0 and removed in 1.6.0, but the
code was not removed.
The bind/unbind operations should not be handled by the eal.
These operations should be either done outside of dpdk or inside the PMDs
themselves as these are their problems.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Move RTE_PCI_DRV_FORCE_UNBIND flag handling out of RTE_EAL_UNBIND_PORTS section.
This had nothing to do with RTE_EAL_UNBIND_PORTS anyway.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The pci_switch_module() function should only do what its name tells: unbind pci
devices and rebind them on the specified kernel driver.
Hence, it can not call pci_uio_map_resource().
Call to pci_uio_map_resource() should be moved to rte_eal_pci_probe_one_driver()
so that we can factorize code.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
A fd leak happens in pci_map_resource when multiple bars are mapped.
Fix this by closing fd unconditionnally in this function and open the
intr_handle fd in pci_uio_map_resource instead.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
virtio-uio does not need eal to map bars from uio device, so remove flag
RTE_PCI_DRV_NEED_IGB_UIO.
Then, move virtio-uio workaround out of generic eal_pci.c for linux
implementation.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
bsd implementation lacks check on driver flags, fix this.
Besides, check on BAR0 is not needed and could cause trouble for devices that
have no BAR0.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Looking at bsd implementation, we can see that there are some potential mem
leaks in linux implementation. Fix them.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Some applications reserve hugepages for later use,
but DPDK doesn't take reserved pages into account
when calculating number of available number of hugepages.
This patch adds reading from "resv_hugepages" file
in addition to "free_hugepages".
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Start development cycle for version 1.7.0.
This new development workflow introduces a new versioning scheme.
Instead of having releases r0, r1, r2, etc, there will be release
candidates. Last number has special meanings:
< 16 numbers are reserved for release candidates (RTE_VER_SUFFIX is -rc)
16 is reserved for the release (RTE_VER_SUFFIX must be unset)
> 16 numbers can be used locally (RTE_VER_SUFFIX must be set)
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Print the maximum lcore(s) as configured, and the number of lcore(s) detected
on eal cpu init as debug info besides the not separate detected/not-detected
lcore info.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
[Thomas: add BSD part]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Increasing maximum number of lcores gives a huge place to undetected
lcores in output traces. Moreover, this output does not give any
interesting information, since list of undetected lcores can be deduced
from list of detected ones.
So remove output related to undetected cores.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is no need for a 'magic' field in struct rte_config, as this part of the
structure is local to each process. All threads of a process are synchronised
because of the run_once atomic.
So remove this field, as it is only adding confusion when reading code that
references 'magic' field from struct rte_mem_config.
Besides, there is no reference about the 'version' field, so remove it as well.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
A line was forgotten when removing blacklist option in commit
"use devargs for vdev and PCI lists with bsd" (cd25fb0863).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
vdev ethdev can not be allocated on a numa socket that is not socket 0.
The reason comes from rte_eth_dev_allocate() which uses rte_socket_id() to
identify the socket on which vdev driver data should be allocated.
However, at this initialization step, rte_socket_id() always returns 0.
Looking at rte_socket_id(), it needs rte_lcore_id() which uses the per-core
global _lcore_id variable. This variable is initialised by
eal_thread_init_master.
So eal_thread_init_master should be called before rte_eal_vdev_init().
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There should be no real need for this initialised field as the whole structure
is set to 0 in rte_config_init() by primary process, and secondary processes
wait for this to happen before anything else (looking at mem_config magic).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
We don't really need this field as it is only used when creating the memzone
object associated to this heap.
Removing numa_socket field makes things simpler and remove race condition.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Following debian kernel headers upgrade to 3.2.57, pci capability accessors
have been backported (upstream commit 8c0d3a02c1309eb6112d2e7c8172e8ceb26ecfca,
("PCI: Add accessors for PCI Express Capability", v3.7-rc1)).
It results in the same compilation error as redhat 6.x.
However, there is no clear way to determine we are building on a debian kernel.
So, rather than determine if we are building on a distribution kernel, look at
PCI_EXP_LNKSTA2 that appeared in this upstream commit.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Compiling the DPDK under FreeBSD gives the following error due to a
missing include <sys/rwlock.h>.
In file included from nic_uio.c:52:
@/vm/vm_pager.h:126:2: error: implicit declaration of function 'rw_assert' is invalid in C99
[-Werror,-Wimplicit-function-declaration]
VM_OBJECT_ASSERT_WLOCKED(object);
^
@/vm/vm_object.h:226:2: note: expanded from macro 'VM_OBJECT_ASSERT_WLOCKED'
rw_assert(&(object)->lock, RA_WLOCKED)
^
In file included from nic_uio.c:52:
@/vm/vm_pager.h:126:2: error: use of undeclared identifier 'RA_WLOCKED'
@/vm/vm_object.h:226:29: note: expanded from macro 'VM_OBJECT_ASSERT_WLOCKED'
rw_assert(&(object)->lock, RA_WLOCKED)
^
In file included from nic_uio.c:52:
@/vm/vm_pager.h:143:2: error: use of undeclared identifier 'RA_WLOCKED'
VM_OBJECT_ASSERT_WLOCKED(object);
^
@/vm/vm_object.h:226:29: note: expanded from macro 'VM_OBJECT_ASSERT_WLOCKED'
rw_assert(&(object)->lock, RA_WLOCKED)
^
In file included from nic_uio.c:52:
@/vm/vm_pager.h:167:2: error: use of undeclared identifier 'RA_WLOCKED'
VM_OBJECT_ASSERT_WLOCKED(object);
^
@/vm/vm_object.h:226:29: note: expanded from macro 'VM_OBJECT_ASSERT_WLOCKED'
rw_assert(&(object)->lock, RA_WLOCKED)
^
In file included from nic_uio.c:52:
@/vm/vm_pager.h:190:2: error: use of undeclared identifier 'RA_WLOCKED'
VM_OBJECT_ASSERT_WLOCKED(m->object);
^
@/vm/vm_object.h:226:29: note: expanded from macro 'VM_OBJECT_ASSERT_WLOCKED'
rw_assert(&(object)->lock, RA_WLOCKED)
^
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit 8e245de6ca.
Add the ability to pass some specific initialization arguments to PCI
devices at start-up.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit cac6d08c8b.
This commit splits the "--use-device" option in two new options:
- "--pci-whitelist or -w": add a PCI device in the white list
- "--vdev": instanciate a new virtual device
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit a8b97e3a1d.
This commit changes the API of --use-device command line argument.
It changes the separators from ';' to ','.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit 1220458951.
This patch removes old whitelist code and use the newly introduced
rte_devargs to get the PCI white list, the PCI black list and the list
of virtual devices.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsd part was missing in commit bf6dea0e04.
This commit introduces a new API for storing device arguments given by
the user. It only adds the framework and the test.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit 5b1f4a67dd.
To avoid confusion with virtual devices, rename device_list as
pci_device_list and driver_list as pci_driver_list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in commit 57c24af85d.
This commit adds a dummy rte_mem_virt2phy() to fix the compilation of
DPDK under BSD. This function is only used when the debug option
"--no-huge" is given, to get the physical address of mempools in memory.
As a result, it seems acceptable for now to implement a dummy function
to fix the compilation as the usual case (using contigmem module) works
properly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The bsdapp part was missing in c5e9eeca5a.
This commit allows external libraries and applications to know if
hugepages are enabled.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When loading a library "libfoo.so" (depending on "libbar.so", located in an
entirely different folder), with a LD_LIBRARY_PATH=/path/to/libfoo.so", it
returns an error:
EAL: ./libfoo.so: cannot open shared object file: No such file or directory
If the first dlopen() fails (here, because it can't find all dependencies),
the code requires for a second dlopen() that looks for "./libfoo.so". It
turns on pathname matching, which does not use LD_LIBRARY_PATH. As a result,
it fails because it cannot find "./libfoo.so".
The error message matches the error of the second dlopen(), not the first's.
Do not try to look for a different library ("./"-prefixed) than the one
provided in argument. Let the dynamic library management handle it, just
provide an appropriate LD_LIBRARY_PATH.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
lcores that are set in coremask should be checked against lcores detected on
system. This way, we won't need to check them later.
Besides, if specifying an unavailable lcore, we currently panic in
eal_thread_loop() because pthread_setaffinity_np fails.
So this check will return an error with a more explicit message in
eal_parse_coremask().
"EAL: pthread_setaffinity_np failed
PANIC in eal_thread_loop():
cannot set affinity"
becomes :
"EAL: lcore 4 unavailable
EAL: invalid coremask"
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Only the last feature was checked since commit 99f2cdf9ca
(eal: fix %rbx corruption and simplify the code)
The return code for rte_cpu_get_flag_enabled is only checked on the termination
of the for loop that it is called inside, but should be checked for every
iteration it makes through the for loop. This is caused by some silly missing
brackets. Simply add them in
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Pablo De Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
For RH 6.5:
- always include mdio.h to get the definitions of MDIO_EEE, ETHTOOL_GEEE
- is_link_local_ether_addr(), pcie_capability_clear_and_set_word(), and
ether_addr_equal() have been backported
For RH 6.4:
- same issue with ether_addr_equal()
- here ETH_GEE is defined without having the functions.
igb_ethtool.c:2441: error: implicit declaration of function ‘mmd_eee_adv_to_ethtool_adv_t’
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On RH 6.5:
igb_main.c:2298: error: unknown field ‘ndo_fdb_add’ specified in
initializer
FDB ops are present in RH 6.5 via the extension of netdev, so add the
ifdef inside the netdev ops definition of igb.
However, FDB functions are not set for RHEL 6.5: the implementation
relies on dev_mc_add_excl API which has not been backported.
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rxhash has been renamed to hash. In 3.14 and newer, we can use
skb_set_hash().
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Need to pass mode argument to open with O_CREAT.
Must check return value from ftruncate().
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The registration of an external vdev driver (a .so library) is done in a
function that has the ((constructor)) attribute. This function is called
when dlopen(driver.so) is invoked.
As a result, we need to do the dlopen() before calling
rte_eal_vdev_init() that calls the initialization functions of all
registered drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Instead of having a list of virtual device drivers in EAL code, add an
API to register drivers. Thanks to this new registration method, we can
remove the references to pmd_ring, pmd_pcap and pmd_xenvirt in EAL code.
This also enables the ability to register a virtual device driver as
a shared library.
The registration is done in an init function flaged with
__attribute__((constructor)). The new convention is to name this
function rte_pmd_xyz_init(). The per-device init function is renamed
rte_pmd_xyz_devinit().
By the way the internal PMDs are now also .so/standalone ready. Let's do
it later on. It will be required to ease maintenance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The name "nonpci_devs" for virtual devices is ambiguous as a physical
device can also be non-PCI (ex: usb, sata, ...). A better name for this
file is "vdev" as it only deals with virtual devices.
This patch doesn't introduce any change except renaming.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some PCI drivers may require some specific initialization arguments at
start-up.
Even if unused today, adding this feature seems coherent with virtual
devices in order to provide a full-featured rte_devargs framework. In
the future, it could be added in pmd_ixgbe or pmd_igb for instance to
enable debug of drivers or setting a specific operating mode at
start-up.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit splits the "--use-device" option in two new options:
- "--pci-whitelist or -w": add a PCI device in the white list
- "--vdev": instanciate a new virtual device
Before the patch, the same option "--use-device" was used for these 2
use-cases.
By the way, we also add "--pci-blacklist" in addition to the existing
"-b" for coherency with the whitelist parameter.
Test result:
echo 100 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
echo 100 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
./app/test -c 0x15 -n 3 -m 64
RTE>>eal_flags_autotest
[...]
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit changes the API of --use-device command line argument.
It changes the separators from ';' to ','. Indeed, ';' is not the best
choice as this character is also used to separate shell commands,
forcing the user to surround arguments with quotes.
This commit impacts both devargs and kvargs as each of them define
a separator in --use-device argument:
- devargs defines the separator between the device name or pci_id and
its arguments
- kvargs defines the separator between each key/value pairs in
arguments for drivers using the kvargs API to parse their arguments
The modification of devargs and kvargs is done in one commit to keep
the coherency of --use-device.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove old whitelist code:
- remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in
is_valid_wl_entry() as we want to be able to register external virtual
drivers as a shared library. Moreover this code was duplicated with
dev_types[] from eal_common_pci.c
- eal_common_whitelist.c was badly named: it was able to process PCI
devices white list and the registration of virtual devices
- the parsing code was complex: all arguments were prepended in
one string dev_list_str[4096], then split again
Use the newly introduced rte_devargs to get:
- the PCI white list
- the PCI black list
- the list of virtual devices
Rework the tests:
- a part of the whitelist test can be removed as it is now tested
in app/test/test_devargs.c
- the other parts are just reworked to adapt them to the new API
This commit induce a small API modification: it is not possible to specify
several devices per "--use-device" option. This notation was anyway a bit
cryptic. Ex:
--use-device="eth_ring0,eth_pcap0;iface=ixgbe0"
now becomes:
--use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0"
On the other hand, it is now possible to work in PCI blacklist mode and
instanciate virtual drivers, which was not possible before this patch.
Test result:
./app/test -c 0x15 -n 3 -m 64
RTE>>devargs_autotest
EAL: invalid PCI identifier <08:1>
EAL: invalid PCI identifier <00.1>
EAL: invalid PCI identifier <foo>
EAL: invalid PCI identifier <>
EAL: invalid PCI identifier <000f:0:0>
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit introduces a new API for storing device arguments given by
the user. It only adds the framework and the test. The modification of
EAL to use this new module is done in next commit.
The final goals:
- unify pci-blacklist, pci-whitelist, and virtual devices arguments
in one file
- allow to register a virtual device driver from a dpdk extension
provided as a shared library. For that we will require to remove
references to rte_pmd_ring and rte_pmd_pcap in argument parsing code
- clarify the API of eal_common_whitelist.c, and rework its code that is
often complex for no reason.
- support arguments for PCI devices and possibly future non-PCI devices
(other than virtual devices) without effort.
Test result:
echo 100 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
echo 100 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
./app/test -c 0x15 -n 3 -m 64
RTE>>eal_flags_autotest
[...]
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
To avoid confusion with virtual devices, rename device_list as
pci_device_list and driver_list as pci_driver_list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commit da6fd0759c.
"timer: get TSC frequency from /proc/cpuinfo"
The use of cpuinfo to determine the frequency of the TSC is not
advisable and leads to incorrect results when power management is
in use. This is because, while the TSC frequency does not change
in modern cpus with constant_tsc support, the frequency of the core,
and hence the frequency of the core reported by cpuinfo *does* change.
Depending on the current frequency of core 0 when an application is
started, the EAL can get a wildly incorrect value for the TSC freq.
Since frequency is scaled down for power saving, any incorrect value
is likely to be lower than the default, which means that any delay
loops inside the code which rely on the TSC will be shorter than
planned. This can cause issues (reported on the mailing list by a number
of people) where ports are not initialized correctly due to delays being
too short.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Neil Horman reported that on x86-64 the upper half of %rbx would get
clobbered when the code was compiled PIC or PIE, because the
i386-specific code to preserve %ebx was incorrectly compiled.
However, the code is really way more complex than it needs to be. For
one thing, the CPUID instruction only needs %eax (leaf) and %ecx
(subleaf) as parameters, and since we are testing for bits, we might
as well list the bits explicitly. Furthermore, we can use an array
rather than doing a switch statement inside a structure.
Reported-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
When not using vmxnet3-uio and virtio-uio PMDs, prevent igb_uio from binding
these devices. This way, vmxnet3 and virtio PMDs won't fail to initialize
because of a device silently bound to igb_uio.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Insert get_physaddr() into public API as rte_mem_virt2phy().
rte_mem_virt2phy() permits to obtain the physical address of any
virtual address mapped to the current process.
get_physaddr() was working only for addresses pointing exactly to
the first byte of a page.
Note that this function is very slow and shouldn't be called
after initialization to avoid a performance bottleneck.
The memory must be locked with mlock(). The function rte_mem_lock_page()
is a mlock() helper that lock the whole page.
A better name would be rte_mem_virt2phys but rte_mem_virt2phy is more
consistent with rte_mempool_virt2phy.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This reverts commit 57c24af85d
which was wrongly rebased in 1.6.0 branch:
- commit log must be changed for 1.6.0
- it breaks building for 32-bit
A new version of this commit has to be done.
The initial commit doesn't build for 32-bit:
8ea9ff83 (mem: allow virtual memory address hinting)
lib/librte_eal/linuxapp/eal/eal.c: In function ‘eal_parse_base_virtaddr’:
build/include/rte_common.h:133:22:
error: cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
RTE_PTR_ALIGN_FLOOR((typeof(ptr))RTE_PTR_ADD(ptr, (align) - 1), align)
^
RTE_PTR_ALIGN_CEIL return type is the same as what we give it as input.
So instead of casting the returned value, cast 'addr' which should be the same
as base_virtaddr.
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Applications can test versions, for compatibility, this way:
#if RTE_VERSION >= RTE_VERSION_NUM(1,2,3,4)
RTE_VERSION was already defined for use with rte_config.
It is moved in rte_version.h and updated to current version number.
Note that the first tag having this helper is 1.2.3r2.
Releases r0 have not this patch.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
ether_addr_equal() was added in Linux 3.5. compare_ether_addr() was
deleted in 3.14. Start using ether_addr_equal() and provide an own
implementation for older kernels.
This fixes the compilation with Linux 3.14-rc1.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The netdev_features_t typedef appeared in Linux 3.3, but checking the kernel
version isn't enough with some distributions (such as Debian Wheezy) that
backported it into 3.2, causing a compilation failure due to redefinition.
Since the presence of a typedef can't be tested at compile time, this commit
adds type kni_netdev_features_t, which, depending on the kernel version,
translates either to u32 or netdev_features_t.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When the user specifies --create-uio-dev in dpdk eal start options, the
DPDK will create the /dev/uioX instead of waiting that a program does it
(which is usually hotplug).
This option is useful in embedded environments where there is no hotplug
to do the work.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new function pci_get_uio_dev() that parses /sys/bus/pci/devices
to get the uio device associated with a PCI device. This patch just
moves some code that was in pci_uio_map_resource() in the new function
without any functional change.
Thanks to this change, the next commit will be easier to understand.
Moreover it improves readability: having smaller functions help to
understand what pci_uio_map_resource() does.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Intel 82546EB Gigabit ethernet controller is reported to be working
with copper.
Tested-by: Ognjen Joldzic <ognjen.joldzic@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some devices need to be unbound in order to be used via the PMD
without kernel module.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since DPDK 1.4, if RTE_EAL_UNBIND_PORTS is disabled, igb_uio mapping is
done for all devices (commit eee16c964c), breaking some non-Intel drivers.
But pci_uio_map_resource() should only be called for Intel devices
(using igb_uio kernel module).
The flag RTE_PCI_DRV_NEED_IGB_UIO is set for all those devices, even when
RTE_EAL_UNBIND_PORTS is disabled (fixes commit a22f5ce8fc).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Since DPDK 1.4, bars mapping is checked and prevent from initializing
drivers which do not use igb_uio mapping (see commit eee16c964c).
There is no need to check for bars mapping, especially BAR0 is not required.
If bars mapping failed, then pci_uio_map_resource will fail and we won't reach
this check. So get rid of BAR0 check.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
In --no-huge mode, mempool provides objects with their associated
header/trailer fitting in a standard page (usually 4KB).
This means all non-UIO driver should work correctly in this mode,
since UIO drivers allocate ring sizes that cannot fit in a page.
Extend rte_mempool_virt2phy to obtain the correct physical address when
elements of the pool are not on the same physically contiguous memory region.
Reason for this patch is to be able to run on a kernel < 2.6.37 without
the need to patch it, since all kernel below are either bugged or don't
have huge page support at all (< 2.6.28).
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Allow external libraries and applications to know if hugepages
are enabled.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When huge pages are disabled, memory is allocated for a single, undefined
CPU socket using malloc(), causing rte_memzone_reserve_aligned() to fail
most of the time.
This patch causes that memory to use SOCKET_ID_ANY instead of 0, and allow
it to be used in place of any socket ID specified by user.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Remove an error log in memzone_reserve_aligned_thread_unsafe().
It is up to the caller to log the error, and this is already done
in DPDK code (especially in network drivers).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Extract rte_mem_virt2phy() from get_physaddr().
rte_mem_virt2phy() permits to obtain the physical address of any
virtual address mapped to the current process calling this function.
Note that this function is very slow and shouldn't be called
after initialization to avoid a performance bottleneck.
The memory must be locked with mlock(). The function rte_mem_lock_page()
is a mlock() helper that lock the whole page.
A better name would be rte_mem_virt2phys but rte_mem_virt2phy is more
consistent with rte_mempool_virt2phy.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
According to Intel Developer's Manual:
"The RDTSC instruction is not a serializing instruction. It does not necessarily wait
until all previous instructions have been executed before reading the counter. Simi-
larly, subsequent instructions may begin execution before the read operation is
performed. If software requires RDTSC to be executed only after all previous instruc-
tions have completed locally, it can either use RDTSCP (if the processor supports that
instruction) or execute the sequence LFENCE;RDTSC."
So add a rte_rdtsc_precise function that do a memory barrier before rdtsc to
synchronize operations and ensure that the TSC read is done at the expected place.
Use r/w memory barrier instead of lfence to serialize both loads and stores.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: François-Frédéric Ozog <ff@ozog.com>
Reviewed-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
TSC frequency was guessed by reading CLOCK_MONOTONIC_RAW or sleeping 1 sec.
Now, read frequency from cpuinfo first.
Keep other methods as fallbacks.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Read flags from /proc/cpuinfo and warn if constant_tsc or nonstop_tsc is
not found.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
This reverts commit "log: get full path as syslog id" (494a02537f)
and restore the original patch from Stephen Hemminger (04210699ee).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This macro was used for blacklist parsing but is not used anymore
since commit 5a55b9ac91.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
1) In the EAL initialization phase, invoke the function rte_eal_cpu_init
to detect the set of running cores (and enable them by default) before
processing the [enabled] core mask option that is performed during the
parsing of EAL arguments.
2) In the function rte_eal_cpu_init():
- to parse the set of all running logical cores on the machine, do not
use the RTE_LCORE_FOREACH macro that considers the set of already
detected cores...
Instead, use a standard loop based on the RTE_MAX_LCORE constant.
- explicitely set to ROLE_RTE the role of each detected logical core
that is recorded in the EAL configuration, as all running cores are
enabled by default.
3) In the function eal_parse_coremask(), update the "lcore_count" field
of the EAL configuration with the effective number of logical cores
that are set in the mask of enabled logical cores.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adding or subtracting a value to a pointer makes a new pointer
of unknown type.
So typeof() is replaced by (void*) in RTE_PTR_ADD() and RTE_PTR_SUB().
But RTE_PTR_ALIGN_* macros have in their explicit API to return a pointer
of the same type. Since RTE_PTR_ALIGN_CEIL is based on RTE_PTR_ADD, a
typeof() is added to keep the original behaviour.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add an option to specify libraries to be loaded before probing the PCI.
For instance, testpmd -d librte_pmd_xxx.so can be used to enable xxx driver
support on testpmd without any recompilation of testpmd.
Plugins are loaded before creating threads because we want the threads to
inherit any property that could be set while loading a plugin, such as iopl().
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
- rte_panic must be before rte_panic_ to be associated to its doc
- marker /**< must be used when commenting after the declaration only
- fix rte_string_fns.h title
- typos
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Update the KNI kernel driver so it can compile on more modern kernels
Also, rebaseline the ethtool support off updated igb kernel drivers
so that we get the latest bug fixes and device support.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
kni_net fixed to prevent losing packet bytes when doing loopback.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reported-by: Daniel Kaminsky <daniel.kaminsky@infinitelocality.com>
This provides a para-virtualization packet switching solution, based on the
Xen hypervisor’s Grant Table, which provides simple and fast packet
switching capability between guest domains and host domain based on
MAC address or VLAN tag.
This solution is comprised of two components; a Poll Mode Driver (PMD)
as the front end in the guest domain and a switching back end in the
host domain. XenStore is used to exchange configure information
between the PMD front end and switching back end,
including grant reference IDs for shared Virtio RX/TX rings, MAC
address, device state, and so on.
The front end PMD can be found in the Intel DPDK directory lib/
librte_pmd_xenvirt and back end example in examples/vhost_xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These library changes provide a new Intel DPDK feature for communicating
with virtual machines using QEMU's IVSHMEM mechanism.
The feature works by providing a command line for QEMU to map several hugepages
into a single IVSHMEM device. For the guest to know what is inside any given IVSHMEM
device (and to distinguish between Intel(R) DPDK and non-Intel(R) DPDK IVSHMEM
devices), a metadata file is also mapped into the IVSHMEM segment. No work needs to
be done by the guest application to map IVSHMEM devices into memory; they are
automatically recognized by the Intel(R) DPDK Environment Abstraction Layer (EAL).
Changes in this patch:
* Changes to EAL to allow mapping of all hugepages in a memseg into a single file
* Changes to EAL to allow ivshmem devices to be transparently mapped in
the process running on the guest.
* New ivshmem library to create and manage metadata exported to guest VM's
* New ivshmem compilation targets
* Mempool and ring changes to allow export of structures to a VM and allow
a VM to attach to those structures.
* New autotests to unit tests this functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For certain functionality, e.g. Xen Dom0 support, it is required that
we can guarantee that memzones for descriptor rings won't cross 2M
boundaries. So add new memzone reserve function where we can pass in a
boundary condition parameter.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Extra space for future alignment was reserved twice.
It was introduced in version 1.3.0 (commit 916e4f4f4e).
Signed-off-by: Pei Chao <peichao85@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In some cases, it is possible to not use hugepages.
So a simple malloc is used to initialize DPDK memory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
For multi-process applications, it can sometimes occur that part of the
address ranges used for memory mapping in the primary process are not
free in the secondary process, which causes the secondary processes to
abort on startup.
This patch adds in a memory hinting mechanism, where you can hint a
starting base address to the primary process for where you would like
the hugepage memory to be mapped. It is just a hint, so the memory will
not always go exactly where requested, but it should allow the memory
addresses used by a primary process to be adjusted up or down a little,
thereby fixing issues with secondary process startup.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added the following new macros/inline functions, which are both
generally useful and needed for later functionality:
* rte_align64pow2: aligns a 64bit parameter to next power of 2
* RTE_LEN2MASK: create mask of type <tp> with the first <ln> bits
* RTE_DIM: return the number of elements in an array.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_ring functions used a compiler barrier to stop the compiler
reordering certain expressions. This is generally useful so is moved
to the common header file with the other barriers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Changes to allow compilation and use on FreeBSD. Includes:
* contigmem and nic_uio driver for FreeBSD
* new EAL instance
* new "bsdapp" compilation target
* various compilation fixes due to differences between linux and freebsd
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The base driver supports more NICs:
- i210 flashless
- i217
- i218
- i354
The new features are not automatically used by the DPDK PMD.
Signed-off-by: Intel
- The flags NETIF_F_HW_VLAN_* have been renamed to NETIF_F_HW_VLAN_CTAG_*.
See Linux commit f646968f8f7c624587de729115d802372b9063dd.
- The VLAN protocol must be specified.
See Linux commits 86a9bad3ab6b6f858fd4443b48738cabbb6d094c
and 80d5c3689b886308247da295a228a54df49a44f6.
Signed-off-by: Intel
This type of pseudo-device is needed for ring and pcap PMDs.
They are compatible with whitelist and are initialized in rte_eal_init().
Signed-off-by: Intel
The pause instruction is part of SSE2 extensions.
Note that some compilers define _mm_pause as "rep; nop" instead of "pause".
For compatible processors, they are equivalent.
http://www.intel.com/Assets/PDF/manual/325383.pdf:
"
When executing a spin-wait loop, a Pentium 4 or Intel Xeon processor suffers
a severe performance penalty when exiting the loop because it detects a
possible memory order violation.
The PAUSE instruction provides a hint to the processor that the code sequence
is a spin-wait loop. The processor uses this hint to avoid the memory order
violation in most situations, which greatly improves processor performance.
"
Signed-off-by: Intel
- timecompare (used for hardware timestamping) has been removed.
(see Linux commit 65f8f9a1c1db831e5159e3e3e50912d1f214cd0c)
Simply disable HW_TIME_STAMP feature because it is not used by KNI.
- annotations __devinit and __devexit have been removed.
(see Linux commit 54b956b903607f8f8878754dd4352da6a54a1da2)
Signed-off-by: Intel
When blacklisting network adapters that share a PCI bus address with multiple
ports such as Mellanox ConnectX-3 (librte_pmd_mlx4), RTE applications
enter infinite loops while probing PCI devices.
This commit removes this probe on subsequent instances for blacklisted devices
that have RTE_PCI_DRV_MULTIPLE set.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Need to change PCI code to support multiple I/O regions on a single device.
Some devices like VMXNET3 have multiple PCI memory regions, and some
have none.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Intel
The VMWare TSC mapping uses a hook to RDPMC to read the physical TSC
in the case of VMware ESXi.
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Jean-Mickael Guerin <jmg@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Introduce new option --vmware-tsc-map, ignored if
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is not set.
Default is CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y.
if CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT is set:
rte_rdtsc() selects at runtime between Vmware mapping of
TSC or native TSC
else
rte_rdtsc() always uses native rdtsc.
When running DPDK on VMware guest, enable --vmware-tsc-map to
read the physical TSC.
Caution: ESXi should pass monitor_control.pseudo_perfctr = TRUE
othewise it results in general protection fault.
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Both logging and calls to panic are never in the critical path.
Use the GCC attribute cold to mark these functions as cold,
which generates more optimised code.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>
By default, DPDK based applications would only allow logging
to syslog as "rte", DAEMON; but for any production application more
control is desired to allow using actual application name and
overriding the facility.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Vincent Jardin <vincent.jardin@6wind.com>
The original definitions prevent external programs/libraries from compiling
without warnings when using these headers and -std=gnu99 (relaxed C99 mode).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Fix warnings of type "Value stored to 'xxx' is never read".
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
__devinit has been removed in linux commit 54b956b903
("Remove __dev* markings from init.h", 3.8-rc4).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Drivers with the flag RTE_PCI_DRV_MULTIPLE enabled will be bound several
times to the same device until they return an error.
These drivers must internally keep track of each device state in order for
this to work reliably.
This flag currently required for Ethernet adapters with several physical
ports but a single address on the PCI bus.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
The returned value of lseek is a virtual address
which can be different from the offset.
Indeed, if the return address has a 64-bit canonical form,
the 16 higher bits are all 1 if bit 47 is 1.
So the check was wrong. It is better to test against an error value.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
Allow to run without igb_uio if probed devices don't require it.
The condition for exiting with an error is:
- Tested driver is needed by a probed device
AND
- Tested driver needs igb_uio
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add a driver reference (if available) to every PCI devices,
even when blacklisted. This information is made available in the global
device_list variable so users know which network devices are managed or
ignored.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
The '\0' is written outside the bounds of the log buffer, which can
result in memory corruption or display issues with log messages.
Use a new constant LOG_BUF_SIZE to store the effective size of the
buffer in struct log_history.
Signed-off-by: Dongsu Han <dongsuh@cs.cmu.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
