When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
using "The DPDK Contributors" as decided by techboard.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The devargs parsing function has changed in 18.08.
The devargs rework should be completed in 18.11.
Fixes: a23bc2c4e0 ("devargs: add non-variadic parsing function")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Due to the upcoming external memory support [1], some API and ABI
changes will be required. In addition, although the changes called
out in the deprecation notice are not yet present in form of code
in the published RFC itself, they are based on consensus on the
mailing list [2] on how to best implement this feature.
[1] http://patches.dpdk.org/project/dpdk/list/?series=453&state=*
[2] https://mails.dpdk.org/archives/dev/2018-July/108002.html
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Hotplug functions should be used directly to add and remove devices.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
These functions are buggy from the very beginning and should not be used.
Generic EAL hotplug mechanisms should be used instead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
As per deprecation notice [1], move DPDK runtime config to default
DPDK runtime data location. Also, remove the deprecation notice and
update release notes to indicate the changes.
[1] http://dpdk.org/patch/40418
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
As announced in the previous release,
The API to attach/dettach a session to a queue pair
is removed, as it was only used in DPAA, and it is not
actually needed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The current mbuf scatter gatter feature flag is
too ambiguous, as it is not clear if input and/or output
buffers can be scatter gather mbufs or not, plus
if in-place and/or out-of-place is supported.
Therefore, five new flags will replace this flag:
- RTE_CRYPTODEV_FF_IN_PLACE_SGL
- RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT
- RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT
- RTE_CRYPTODEV_FF_OOP_LB_IN_SGL_OUT
- RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Removed rte_cryptodev_get_header_session_size
and rte_cryptodev_get_private_session_size functions,
as they have been substituted with functions
specific for symmetric operations, with _sym_ word
after "rte_cryptodev_".
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Removed cryptodev queue start/stop functions,
as they were marked deprecated in 18.05, since they
were not implemented by any driver.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In release 18.05, a deprecation notice to remove the `sym`
structure in the cryptodev info structure was sent.
However, only one of the fields inside the structure will
be removed, so the notice is not actually correct.
In any case, it needs to be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Structure rte_cryptodev_info has currently PCI device
information ("struct rte_pci_device") in it.
This information is not generic to all devices,
so this gets replaced with the generic "rte_device" structure,
compatible with all crypto devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Device querying and declaration has been postponed to 18.08.
Additionally, while working on the feature, some changes previously
announced won't be enacted.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Deprecate rte_eal_mbuf_default_mempool_ops(), it shall be replaced by
rte_mbuf_best_mempool_ops().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Most of this work was already done, but runtime config path is
considered to be part of public API because of high likelihood of
it being used by various tools in the DPDK ecosystem, and thus
requires a deprecation notice.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
New default configuration without flexible payload
is implemented now.
Fixes: d2f9fe8ae3 ("net/i40e: turn off flexible payload on driver init")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Some feature flags, such as RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER
are ambiguous. In this case, it is not clear if Scatter Gather lists
are supported in the input buffer and/or output buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_start/stop
are not really used in any of the crypto drivers
(they all just return 0 or -ENOTSUP).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_attach_sym_session
and rte_cryptodev_queue_pair_detach_sym_sessions
are not really used in any of the crypto drivers
(only one driver implements it and it just return 0).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Cryptodev info structure currently contains
a pointer to an rte_pci_device structure.
This field depends on a specific bus type (PCI),
which is not following a bus independent design.
Following the same approach taken in ethdev, the field
will be replaced with a pointer to an rte_device structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Since the API changes made in 17.08, the session mempool
is not created anymore in each crypto device.
Therefore, there is no need to have, in the cryptodev info
structure, the maximum number of sessions supported per device
and per queue pair.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Introduces a new port attribute to ethdev port's which denotes the
switch domain a port belongs to. By default all port's switch
identifiers are set to RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID. Ports
which supported the concept of switch domains can be configured with
the same switch domain id.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
According to
commit 315ee8374e ("doc: reduce initial offload API rework scope
to drivers")
All PMDs should have moved to the new offloads API. Therefore it is safe
to remove the new->old convert helps.
The old->new helpers will remain to support application which still use
the old API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If mempool manager supports object blocks (physically and virtual
contiguous set of objects), it is sufficient to get the first
object only and the function allows to avoid filling in of
information about each block member.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte_lcore_has_role() returns 0 if role of lcore matches requested
role. The return value of the API is confusing, and this is a known
problem with a deprecation notice announcing the change to more
intuitive semantics:
Commit 064518f68d ("doc: announce EAL API change to lcore role function")
Implement changes announced in the deprecation notice, and remove it.
Also, fix usages of this API to reflect the change. Control thread patches
expected new behavior and were broken before, now they are fixed as well.
Fixes: d651ee4919 ("eal: set affinity for control threads")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Initially, rte_devargs was meant to be populated once and sometimes
accessed, then never emptied.
With the new hotplug functionality having better standing, new usage
appeared with repeated addition of devices and their subsequent removal.
Exposing devargs_list pushed bus drivers and libraries to be careless
and inconsistent in their memory management. Making it private will
allow to rationalize this part of the EAL and ensure that fewer memory
leaks occur during operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The callback is not required any more since there is a new callback
to populate objects using provided memory area which provides
the same information.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move rte_mempool_xmem_size() code to internal helper function
since it is required in two places: deprecated rte_mempool_xmem_size()
and non-deprecated rte_mempool_op_calc_mem_size_default().
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback was introduced to let generic code to know octeontx
mempool driver requirements to use single physically contiguous
memory chunk to store all objects and align object address to
total object size. Now these requirements are met using a new
callbacks to calculate required memory chunk size and to populate
objects using provided memory chunk.
These capability flags are not used anywhere else.
Restricting capabilities to flags is not generic and likely to
be insufficient to describe mempool driver features. If required
in the future, API which returns structured information may be
added.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback allows to customize how objects are stored in the
memory chunk. Default implementation of the callback which simply
puts objects one by one is available.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Size of memory chunk required to populate mempool objects depends
on how objects are stored in the memory. Different mempool drivers
may have different requirements and a new operation allows to
calculate memory size in accordance with driver requirements and
advertise requirements on minimum memory chunk size and alignment
in a generic way.
Bump ABI version since the patch breaks it.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The original code replies on the private channel for primary and
secondary communication. Change to use the generic multi-process
channel.
Note with this change, dpdk-pdump will be not compatible with
old version DPDK applications.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The initial objective of
commit d9f0d3a1ff ("ring: remove split cacheline build setting")
was to add an empty cache line between the producer and consumer
data (on platform with cache line size = 64B), preventing from
having them on adjacent cache lines.
Following discussion on the mailing list, it appears that this
also imposes an alignment constraint that is not required.
This patch removes the extra alignment constraint and adds the
empty cache lines using padding fields in the structure. The
size of rte_ring structure and the offset of the fields remain
the same on platforms with cache line size = 64B:
rte_ring = 384
rte_ring.name = 0
rte_ring.flags = 32
rte_ring.memzone = 40
rte_ring.size = 48
rte_ring.mask = 52
rte_ring.prod = 128
rte_ring.cons = 256
But it has an impact on platform where cache line size is 128B:
rte_ring = 384 -> 768
rte_ring.name = 0
rte_ring.flags = 32
rte_ring.memzone = 40
rte_ring.size = 48
rte_ring.mask = 52
rte_ring.prod = 128 -> 256
rte_ring.cons = 256 -> 512
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows individual PMDs to specify preferred parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Do ethdev new offloading API switch in two steps.
In v18.05 target is implementing the new ethdev-PMD offload interface,
which means converting all PMDs to new offloading API.
Next target is removing the old ethdev offload API.
It will effect applications and will force them to implement new
offloading API.
Fixes: 3004d34541 ("doc: update deprecation of ethdev offload API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
During lcore scan, find all socket ID's and store them, and
provide public API to query valid socket id's. This will break
the ABI, so bump ABI version.
Also, remove deprecation notice corresponding to this change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
