Add support for register_memory_area ops in mempool driver.
Allow more than one HW pool when using OcteonTx mempool driver:
By storing each pool information to the list and find appropriate
list element by matching the rte_mempool pointers.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Upon pool free request from application, Octeon FPA free
does following:
- Uses mbox to reset fpapf pool setup.
- frees fpavf resources.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Upon pool allocation request by application, Octeontx FPA alloc
does following:
- Gets free pool from pci fpavf array.
- Uses mbox to communicate fpapf driver about,
* gpool-id
* pool block_sz
* alignemnt
- Programs fpavf pool boundary.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A mempool device is set of PCIe vfs.
On Octeontx HW, each mempool devices are enumerated as
separate SRIOV VF PCIe device.
In order to expose as a mempool device:
On PCIe probe, the driver stores the information associated with the
PCIe device and later upon application pool request
(e.g. rte_mempool_create_empty), Infrastructure creates a pool device
with earlier probed PCIe VF devices.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
xmem_size and xmem_usage need to know the status of mempool flags,
so add 'flags' arg in _xmem_size/usage() api.
Following patch will make use of that.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are two bonding APIs using ABI versioning, and both have
port_id as parameter. Since we are already breaking ABI, no need
to keep older versions of APIs.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Before this patch, the devices discovered from VFIO layer were
being added in the device list in the order received from directory
scan. This causes an issue in case devices are reordered.
This patch makes all the devices inserted in the device list in
sorted order according to their name.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
enable the printing of objects during debuging.
use RTE_LOG to avoid function name printing for object name.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Instead of enabling the RX checksum by default, make it
enable only with user ethernet configuration
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current code is sending 8 packet in each internal loop.
In some of the conditions, mbuf is being allocated or freed.
In case of error, the code is returning without taking care of
such buffer. It is better to send already prepared buffer and err
for the current failure only.
Fixes: 9e5f3e6d36 ("net/dpaa2: handle non-hardware backed buffer pool")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
name alignment for check command and result functions
putting them as separate functions instead of changing the original
functions.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
QMan5.0 supports up to 32 frames in one volatile dequeue
command. For the older Qman versions which only support
up to 16 frames, the highest bit in NUMF will be ignored.
Signed-off-by: Haiying Wang <haiying.wang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The word_copy is not as efficient as expected, so remove it from
this driver.
Signed-off-by: Haiying Wang <haiying.wang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC qede_rxtx.o
qede_rxtx.c: In function ‘qede_start_queues’:
qede_rxtx.c:797:9: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
return rc;
^~
If there is no Rx or Tx queue, rc will not be initialized. Fix it
by initializing rc to -1.
Fixes: 4c4bdadfa9 ("net/qede: refactoring multi-queue implementation")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Harish Patil <harish.patil@cavium.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC rte_pmd_bnxt.o
rte_pmd_bnxt.c: In function ‘rte_pmd_bnxt_set_all_queues_drop_en’:
rte_pmd_bnxt.c:116:6: error: ‘rc’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
int rc;
^~
This can happen if both bp->nr_vnics and bp->pf.active_vfs are 0.
Fix it by initializing rc to -EINVAL.
Fixes: 49947a13ba ("net/bnxt: support Tx loopback, set VF MAC and queues drop")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
If vectorized Rx burst is short of mbufs in replenishment, Rx SW ring can
overflow as the Rx burst handles 4 packets in a loop. This is because the
function fills SW ring and its mbufs first and checks validity of
each completion later. So, there should be some buffer slots at the tail of
the ring to protect mbufs which are already owned by application.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Cc: stable@dpdk.org
Reported-by: Martin Weiser <martin.weiser@allegro-packets.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
One of the main identified use cases for the tap PMD is to be used in
combination with the fail-safe PMD as a fallback for a physical device.
Fail-safe is very strict about making sure its current configuration is
properly applied to all slave devices, they get rejected otherwise in
order to maintain a consistent state.
The problem is that tap's RSS support is currently limited to the
default (non-Toeplitz) balancing performed by the kernel on all Rx
queues. While proper RSS support emulation in the tap PMD is a work in
progress, the lack of rte_flow counterpart prevents validation of the
above use case in the meantime.
Given that unlike most PMDs, tap is more about convenience than
performance, support for the RSS action can be temporarily faked with
a minimum amount of code and mostly correct behavior by treating it
like a QUEUE action. Traffic is directed to the first queue of the set.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
This patch sets TEID of GTP-C and GTP-U as filter type
by replacing existed filter types inner_mac and TUNNEL_KEY.
This configuration will be set when adding GTP-C or
GTP-U filter rules, and it will be invalid only by
NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_parse_gtp_filter parsing
function for GTP-C and GTP-U to support cloud filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds FDIR support for GTP-C and GTP-U. The
input set of GTP-C and GTP-U is TEID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
rte_eth_fdir_* structures are still used in FDIR functions.
This patch adds i40e private FDIR related structures and
functions to finish integration FDIR with generic flow API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Update new packet type and new pctype info when downloading
profile.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
We were hardcoding the max MAC addresses to 32, while the HW
can support more than that. This was restricting the number of VMDQ
pools that we could support. Use the value obtained from FW instead.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for ntuple filtering.
Only RTE_5TUPLE_FLAGS is supported currently.
RTE_2TUPLE_FLAGS is not supported.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
