Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in Broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_vhost_dequeue_burst supports two ways of dequeuing data.
If the data fits into a buffer, then all data is copied and a
single linear buffer is returned. Otherwise it allocates
additional mbufs and chains them together to return a multiple
segments mbuf.
While that covers most use cases, it forces applications that
need to work with larger data sizes to support multiple segments
mbufs. The non-linear characteristic brings complexity and
performance implications to the application.
To resolve the issue, add support to attach external buffer
to a pktmbuf and let the host provide during registration if
attaching an external buffer to pktmbuf is supported and if
only linear buffer are supported.
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace rte_ipsec_sad_add(), rte_ipsec_sad_del() and
rte_ipsec_sad_lookup() stubs with actual implementation.
It uses three librte_hash tables each of which contains
an entries for a specific SA type (either it is addressed by SPI only
or SPI+DIP or SPI+DIP+SIP)
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Replace rte_ipsec_sad_create(), rte_ipsec_sad_destroy() and
rte_ipsec_sad_find_existing() API stubs with actual
implementation.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
According to RFC 4301 IPSec implementation needs an inbound SA database
(SAD).
For each incoming inbound IPSec-protected packet (ESP or AH) it has to
perform a lookup within it's SAD.
Lookup should be performed by:
Security Parameters Index (SPI) + destination IP (DIP) + source IP (SIP)
or SPI + DIP
or SPI only
and an implementation has to return the 'longest' existing match.
This patch extend DPDK IPsec library with inbound security association
database (SAD) API implementation that:
- conforms to the RFC requirements above
- can scale up to millions of entries
- supports fast lookups
- supports incremental updates
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
List of unsupported features doesn't reflect latest changes.
Fixes: cd5b860c1851 ("ipsec: support header construction")
Fixes: 2c1887fad075 ("ipsec: fix transport mode for IPv6 with extensions")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit adds asymmetric session-less option to
rte_crypto_asym_op. Feature flag for session-less is added
to rte_cryptodev.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
After calling rte_rcu_qsbr_start API, the token and the deleted
resource need to be stored for subsequent query/free.
Fixes: 64994b56cfd7 ("rcu: add RCU library supporting QSBR mechanism")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Enable both C11 atomic and non C11 atomic lock-free stack for aarch64.
Introduced a new header to reduce the ifdef clutter across generic and C11
files. The rte_stack_lf_stubs.h contains stub implementations of
__rte_stack_lf_count, __rte_stack_lf_push_elems and
__rte_stack_lf_pop_elems.
Suggested-by: Gage Eads <gage.eads@intel.com>
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds support to allow users enable/disable allmulticast mode for
kni interface.
This requirement comes from bugzilla 312, more details can refer to:
https://bugs.dpdk.org/show_bug.cgi?id=312
Bugzilla ID: 312
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add build infrastructure and documentation
update for arm64 JIT support.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When IOMMU is not available, /sys/kernel/iommu_groups will not be
populated. This is happening since at least 3.6 when VFIO support
was added. If the directory is empty, EAL should not pick IOVA as
VA as the default IOVA mode.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When bus layer reports the preferred mode as RTE_IOVA_DC then
select the RTE_IOVA_VA mode:
- All drivers work in RTE_IOVA_VA mode, irrespective of physical
address availability.
- By default, a mempool asks for IOVA-contiguous memory using
RTE_MEMZONE_IOVA_CONTIG. This is slow in RTE_IOVA_PA mode and it
may affect the application boot time.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c16 ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch updates the constant names and function names used
in code snippets in the Compression Device Library documentation.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Some machine (like on dpdk.org) may fail to build the prog guide PDF
because of a table characher being "+" instead of "|".
Some figure references are also fixed with automatic numbering.
Fixes: 3f3f608142cf ("doc: update bbdev guide for 5GNR operations")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Once the library usage is over, it must be deinitialized which
will free the shared memory reserved during initialization.
Observed an issue while running 'metrics_autotest' continuously
without quiting. For the first run 'metrics_autotest' passes
all test cases but second run onwards first test case fails
because metrics library is already initialized during first run.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
va2pa depends on the physical address and virtual address offset of
current mbuf. It may get the wrong physical address of next mbuf which
allocated in another hugepage segment.
In rte_mempool_populate_default(), trying to allocate whole block of
contiguous memory could be failed. Then, it would reserve memory in
several memzones that have different physical address and virtual address
offsets. The rte_mempool_populate_default() is used by
rte_pktmbuf_pool_create().
Fixes: 8451269e6d7b ("kni: remove continuous memory restriction")
Cc: stable@dpdk.org
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update KNI documentation to reflect current ethtool support.
Replace references to out dated tools (ifconfig) with
modern iproute2. Tshark is a better replacement for tcpdump.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_gre_key in order to match the optional key field.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The documentation captures the related change in
BBDEV API to support 5GNR encode/decode operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Add support for packets that consist of multiple segments.
Take into account that trailer bytes (padding, ESP tail, ICV)
can spawn across multiple segments.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Fixed some typos and clarified how errors on ops which
fail to get submitted on the enqueue API should be handled.
Fixes: a584d3bea902 ("doc: add compressdev library guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
A bad formula was copied and pasted.
Fixes: 4935e1e9f76e ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57cf ("doc: add cryptodev chapter in prog guide")
Fixes: a9bb0c44c775 ("doc: add rawdev library guide and doxygen page")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
In current implementation, an action which requires parameters
must accept them enclosed in a structure.
Some actions require a single, trivial type parameter, but it still
must be enclosed in a structure.
This obligation results in multiple, action-specific structures, each
containing a single trivial type parameter.
This patch introduces a new approach, allowing an action configuration
object of any type, trivial or a structure.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add actions:
- INC_TCP_SEQ - Increase sequence number in the outermost TCP header.
- DEC_TCP_SEQ - Decrease sequence number in the outermost TCP header.
- INC_TCP_ACK - Increase acknowledgment number in the outermost TCP
header.
- DEC_TCP_ACK - Decrease acknowledgment number in the outermost TCP
header.
Original work by Xiaoyu Min.
This patch uses the new approach introduced by [1], using a simple
integer instead of using an action-specific structure for each of
the new actions.
[1] http://patches.dpdk.org/patch/55882/
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The mempool library assigns handler ops indexes based on the dynamic load
order of mempool handlers. Indexes are used so a mempool can be used by
multiple processes, but this only works if all processes agree on the
mapping from index to mempool handler.
When using the '-d' argument, it's possible for different processes to load
mempool handlers in different orders, and thus have different
index->handler mappings. Using a mempool in multiple of such processes will
result in undefined behavior.
This commit adds a note to the mempool library programmer's guide warning
users against this.
Fixes: 449c49b93a6b ("mempool: support handler operations")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The EAL init diagram had a typo for "lauch"
instead of "launch".
Fixes: fc1f2750a3ec ("doc: programmers guide")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When handling synchronous or asynchronous requests, the reply
must be sent explicitly even if the result of the operation is
an error, to avoid the other side timing out. Make note of this
in documentation explicitly.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
IPC and memory-related API's should not be mixed because memory
relies on IPC internally. Add explicit warnings to IPC API and
to the documentation about this.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
rte_hash_hash is multi-thread safe but not multi-process safe
because of the use of function pointers. Previous document
and comment says the other way around. This commit fixes
the issue.
Fixes: fc1f2750a3ec ("doc: programmers guide")
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Cc: stable@dpdk.org
Reported-by: Andrey Nikolaev <gentoorion@gmail.com>
Suggested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
