As legacy filter API "filter_ctrl" is superseded since 2017
by the rte_flow API, and got the deprecated attribute in DPDK 19.05,
it is time to remove the associated features from the matrix.
Not documenting deprecated features as supported will avoid confusion.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Flow control was not documented as a supported feature
since the first fill of features matrix for mlx drivers.
Flow API and CRC offload flag support in mlx4 were missing in the
feature matrix when they were implemented (see below commits).
Fixes: 46d5736a7049 ("net/mlx4: support basic flow items and actions")
Fixes: ce07b1514d59 ("net/mlx4: fix CRC stripping capability report")
Fixes: e86b85ca757b ("doc: fill nics features matrix for mlx")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Add command-line argument to set LRO session timeout.
Add LRO settings struct in PMD configuration struct.
Add support of LRO offload in port configuration.
Add macros and function to check if LRO is supported and enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add remaining PTP configuration/slowpath operations.
Timesync feature is available only for PF devices.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx and Tx queue descriptor related operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add queue start and stop operations. Tx queue needs
to update the flow control value, Which will be
added in sub subsequent patch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add register dump support and mark Registers dump in features.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Available link speeds are based on VIC adapter model, which is encoded
in PCI subsystem device ID.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When Rx interrupts are disabled, we simply disable rearm when
the interrupt fires the next time. So, the next packet will
trigger interrupt (if it is not happened yet after previous Rx
burst processing).
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
These are driver MACsec configuration routines.
They fill in config structures and prepare these
to be send to FW. Actual configuration will happen in
link interrupt handler.
We declare MACsec offload bits in DPDK offload capabilities
and provide external experimental MACsec API wrappers.
Also update documentation with feature matrix for the
enabled feature.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Commit 267d32de46a8 ("net/qede: support generic flow API")
added a support for RTE_FLOW APIs but did not update the feature
support matrix.
Fixes: 267d32de46a8 ("net/qede: support generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API function rte_eth_dev_fw_version_get() is querying drivers
via the operation callback fw_version_get().
The implementation of this operation is added for mlx4 and mlx5.
Both functions are copying the same ibverbs field fw_ver
which is retrieved when calling ibv_query_device[_ex]()
during the port probing.
It is tested with command "drvinfo" of examples/ethtool/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
