Replace DSW's use of regular DPDK rings (and code for
packing/unpacking control messages into void pointers) with custom
size rings.
In addition to cleaner code, this change allows DSW to support up to
the eventdev API's maximum of 255 ports by tweaking DSW_MAX_PORTS.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Relax memory requirement for event timers when internal mempool used is
octeontx2 mempool.
Add debug log to print the memory used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
If an application issues rte_event_enqueue_new_burst() or
rte_event_enqueue_forward_burst() call with a burst of events longer
than the configured max enqueue burst size, DSW allocates credits not
only for events actually enqueued, but for the complete burst. If this
process is repeated, enough credits will have leaked to cause the
event device to backpressure (i.e. disallow) any new enqueue
operations.
In addition, the port-level enqueue xstats will log the wrong number
of events enqueued for oversized enqueues.
This patch makes DSW gracefully handle oversized enqueue bursts.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Fix DSW's rte_event_enqueue_burst(), so that a call with a zero-sized
event array immediately flushes the port's output buffers. Prior to
this patch, the flush operation would be deferred to the next enqueue
or dequeue call, which is inconsistent with DSW documentation.
Fixes: 1c8e3caa3b ("event/dsw: add event scheduling and device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
When net/octeontx is connected to event/octeontx as an event Rx adapter,
PKI aka 'net/octeontx' can forward packets directly to SSO aka
'event/octeontx'.
When pumping traffic to PKI if flow control is disabled internal FIFOs
might be overrun causing partial l2 packets to be enqueued.
SSO receives <31:0> TAG tag calculated by PKI, in normal cases <31:28>
is always 0 which signifies RTE_EVENT_TYPE_ETHDEV. But in case of
partial received packets PKI sets the <31:0> TAG as 0xFFFFFFFF which
is an invalid event type.
Add a check to see if TAG is 0xFFFFFFFF and free the partial receive
packet.
Fixes: d0d6549860 ("net/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since TIM buckets are always aligned to 32B and our cache line size being
128B, we will always have a cache miss when reading current_chunk pointer.
Avoid the cache miss by storing the current_chunk pointer in the bucket
opposite to the current bucket.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix HW race condition observed when timeout resolution is low (<5us).
When HW traverses a given TIM bucket it will clear chunk_remainder,
but since SW always decreases the chunk_remainder at the start of the
arm routine it might cause a race where SW updates chunk_remainder
after HW has cleared it that lead to nasty side effects.
Fixes: 95e4e4ec74 ("event/octeontx2: add timer arm timeout burst")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Sync mail box data structures to version 1.1.3.
Add mail box version verification and defer initializing octeontx
devices if mail box version mismatches.
Update OCTEON TX limitaion with max mempool size used.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some variables are commented out. Remove them.
Fixes: d548ef513c ("event/opdl: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘chunk’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
bkt->current_chunk = (uintptr_t)chunk;
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Use WFE to save power while waiting for tag to become head.
SSO signals EVENTI to allow cores to exit from wfe when they
are waiting for specific operations in which one of them is
setting HEAD bit in GWS_TAG.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support of Tx adapter for DPAA2 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds the support of Tx adapter for DPAA1 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The number of atomic flows supported was not returned correctly for
DPAA driver. This patch fixes the same.
Fixes: b08dc6430a ("event/dpaa: add queue config get/set")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for testing dpaa2 eventdev self test
for basic sanity for parallel and atomic queues.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds the break in the TX function, if it is failing
to send the packets out. Previously the system was trying
infinitely to send packet out.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch removes the conditional compilation for
cryptodev event support from RTE_LIBRTE_SECURITY flag.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Test vector expect only one type of scheduling as default.
The old code is provide support scheduling types instead of default.
Fixes: 13370a3877 ("eventdev: fix inconsistency in queue config")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Octeontx2 SSO co-processor allows multiple ethernet device Rx queues
connected to a single Event device queue.
Fix the Rx adapter capabilities to allow application to configure
Rx queueus in n:1 ratio to event queues by adding
`RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ` as a capability.
Fixes: 37720fc1fb ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The sw PMD implements xstats reset by having the xstat get operations
return a value to the statistic's value at the last reset. The value at the
last reset is maintained in the per-xstat reset_value field, but the PMD
was setting reset_value = current - reset_value instead of reset_value =
current.
Fixes: c1ad03df7a ("event/sw: support xstats")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
event dpaa device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa_eventdev to attach
dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
A huge drop in per core MPPS value was observed when PTP stack is
enabled. The reason behind the bottleneck is HW serialises the
transfer of all SQEs, which seeks timestamp capture, on the same
send DMA path. Hence only those packets which requires timestamp
capture should set SETTSTAMP in send mem alg.
With this patch timestamping would be done only for those packets
with PKT_TX_IEEE1588_TMST set.
Fixes: fb3ae0951a ("net/octeontx2: support Tx")
Fixes: 8980a15300 ("event/octeontx2: support PTP for SSO")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add PTP support for SSO based on rx_offloads of the queue connected to
it.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
