Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_flow_expand_rss expands rte_flow item list based on the RSS
types. In another word, some additional rules are added if the user
specified items are not complete enough according to the RSS type,
for example:
... pattern eth / end actions rss type tcp end ...
User only provides item eth but want to do RSS on tcp traffic.
The pattern is not complete enough to filter TCP traffic only.
This will be a problem for some HWs.
So some PMDs use rte_flow_expand_rss to expand above user provided
flow to:
... pattern eth / end actions rss types tcp
... pattern eth / ipv4 / tcp / end actions rss types tcp ...
... pattern eth / ipv6 / tcp / end actions rss types tcp ...
in order to filter TCP traffic only and do RSS correctly.
However the current expansion cannot handle pattern as below, which
provides ethertype or ip next proto instead of providing an item:
... pattern eth type is 0x86DD / end actions rss types tcp ...
rte_flow_expand_rss will expand above flow to:
... pattern eth type is 0x86DD / ipv4 / tcp end ...
which has conflicting values: 0x86DD vs. ipv4 and some HWs will refuse
to create flow.
This patch will fix above by checking the last item's spec and to
expand RSS flows correctly.
Currently only support to complete item list based on ether type or ip
next proto.
Fixes: 4ed05fcd44 ("ethdev: add flow API to expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, metadata can be set on egress path via mbuf tx_metadata field
with PKT_TX_METADATA flag and RTE_FLOW_ITEM_TYPE_META matches metadata.
This patch extends the metadata feature usability.
1) RTE_FLOW_ACTION_TYPE_SET_META
When supporting multiple tables, Tx metadata can also be set by a rule and
matched by another rule. This new action allows metadata to be set as a
result of flow match.
2) Metadata on ingress
There's also need to support metadata on ingress. Metadata can be set by
SET_META action and matched by META item like Tx. The final value set by
the action will be delivered to application via metadata dynamic field of
mbuf which can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_RX_DYNF_METADATA flag will be set along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior to use SET_META action.
The availability of dynamic mbuf metadata field can be checked
with rte_flow_dynf_metadata_avail() routine.
If application is going to engage the metadata feature it registers
the metadata dynamic fields, then PMD checks the metadata field
availability and handles the appropriate fields in datapath.
For loopback/hairpin packet, metadata set on Rx/Tx may or may not be
propagated to the other path depending on hardware capability.
MARK and METADATA look similar and might operate in similar way,
but not interacting.
Initially, there were proposed two metadata related actions:
- RTE_FLOW_ACTION_TYPE_FLAG
- RTE_FLOW_ACTION_TYPE_MARK
These actions set the special flag in the packet metadata, MARK action
stores some specified value in the metadata storage, and, on the packet
receiving PMD puts the flag and value to the mbuf and applications can
see the packet was threated inside flow engine according to the appropriate
RTE flow(s). MARK and FLAG are like some kind of gateway to transfer some
per-packet information from the flow engine to the application via
receiving datapath. Also, there is the item of type RTE_FLOW_ITEM_TYPE_MARK
provided. It allows us to extend the flow match pattern with the capability
to match the metadata values set by MARK/FLAG actions on other flows.
From the datapath point of view, the MARK and FLAG are related to the
receiving side only. It would useful to have the same gateway on the
transmitting side and there was the feature of type RTE_FLOW_ITEM_TYPE_META
was proposed. The application can fill the field in mbuf and this value
will be transferred to some field in the packet metadata inside the flow
engine. It did not matter whether these metadata fields are shared because
of MARK and META items belonged to different domains (receiving and
transmitting) and could be vendor-specific.
So far, so good, DPDK proposes some entities to control metadata inside
the flow engine and gateways to exchange these values on a per-packet basis
via datapaths.
As we can see, the MARK and META means are not symmetric, there is absent
action which would allow us to set META value on the transmitting path.
So, the action of type:
- RTE_FLOW_ACTION_TYPE_SET_META was proposed.
The next, applications raise the new requirements for packet metadata.
The flow ngines are getting more complex, internal switches are introduced,
multiple ports might be supported within the same flow engine namespace.
From the DPDK points of view, it means the packets might be sent on one
eth_dev port and received on the other one, and the packet path inside
the flow engine entirely belongs to the same hardware device. The simplest
example is SR-IOV with PF, VFs and the representors. And there is a
brilliant opportunity to provide some out-of-band channel to transfer
some extra data from one port to another one, besides the packet data
itself. And applications would like to use this opportunity.
It is supposed for application to use trials (with rte_flow_validate)
to detect which metadata features (FLAG, MARK, META) actually supported
by PMD and underlying hardware. It might depend on PMD configuration,
system software, hardware settings, etc., and should be detected
in run time.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68c ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c21 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A tag is a transient data which can be used during flow match. This can be
used to store match result from a previous table so that the same pattern
need not be matched again on the next table. Even if outer header is
decapsulated on the previous match, the match result can be kept.
Some device expose internal registers of its flow processing pipeline and
those registers are quite useful for stateful connection tracking as it
keeps status of flow matching. Multiple tags are supported by specifying
index.
Example testpmd commands are:
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xaa00bb mask 0xffff00ff /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xcc00 mask 0xff00 /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xaa00bb value mask 0xffff00ff /
eth ... / end
actions ... jump group 2 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xcc00 value mask 0xff00 /
tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
flow create 0 ingress group 2
pattern tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69fe ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The queue state defines are internal to the DPDK.
This commit moves them to a private header file.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some of the internal header files have 'rte_' prefix
and some don't.
Remove 'rte_' prefix from all internal header files.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Let's stick to the current model of per library ABI version until the
new model is in place.
The ABI changed in the incriminated commit.
The release notes were updated accordingly but the compiled version
number has been missed.
Fixes: 4f25d7d225 ("ethdev: add return code to device info get function")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The include for rte_ether.h in each of these files should not use
quotes, as the header file is not in the librte_ethdev directory.
These are now updated to use <> symbols, to search directories
pre-designated by the compiler.
Fixes: 57668ed7bc ("net: move ethernet definitions to the net library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new rte_flow_item_higig2_hdr in order to match higig2 header.
It is a layer 2.5 protocol and used in Broadcom switches.
Header format is based on the following document.
http://read.pudn.com/downloads558/doc/comm/2301468/HiGig_protocol.pdf
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The promiscuous enable and disable functions now check the
promiscuous state of the device before checking if the dev_ops
function exists for the device.
This change is necessary to allow sample applications run on
virtual PMDs, as previously -ENOTSUP returned when the promiscuous
enable function was called. This caused the sample application to
fail unnecessarily.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch reserves several bits as input set selection from the
high end of the 64 bits. It is combined with exisiting ETH_RSS_*
to represent RSS types. This patch also checks the simultaneous
use of SRC_ONLY and DST_ONLY of the same level.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch decouples RTE_ETH_FLOW_* and ETH_RSS_*. The former defines
flow types and the latter defines RSS offload types.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some PMDs have more than one Rx/Tx burst paths, add the ethdev API
that allows an application to retrieve the mode information about
Rx/Tx packet burst such as Scalar or Vector, and Vector technology
like AVX2.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use correct flag for indicating QinQ strip rx offload.
Fixes: dfebfc9882 ("ethdev: support dynamic configuration of QinQ strip")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to enable GTPU eth flow type for RSS hash
index calculation.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch add definitions of maximal data length in module EEPROM,
values are compatible with include/uapi/linux/ethtool.h.
These definitions can be used by application to validate data length.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable all-multicast mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
all-multicast mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured all-multicast
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable promiscuous mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
promiscuous mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured promiscuous
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Security Parameters Index (SPI) should be set with network endian
values.
While 0xffffffff == htonl(0xffffffff), this missing annotation is
caught by sparse when compiling ovs (dpdk-latest branch).
Fixes: d4b684f719 ("net: add ESP header to generic flow steering")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
There is no RTE_FDIR_DISABLE. The right name is RTE_FDIR_MODE_NONE.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Sort the experimental symbols per release to make it easier/quicker to
check for how long we have them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_dev_info_get() returns void and caller does know if the function
does its job or not. Changing of the return value to int would be
API/ABI breakage which requires deprecation process and cannot be
backported to stable branches. For now, make sure that device info is
initialized even in the case of invalid port ID.
Fixes: a30268e9a2 ("ethdev: reset whole dev info structure before filling")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use rte_eth_unformat_addr, so that ethdev can be built and work
without the cmdline library. The dependency on cmdline was
an arrangement of convenience anyway.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_gre_key in order to match the optional key field.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Enable missing support for runtime configuration (setting/getting)
of QinQ strip rx offload for a given ethdev.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In current implementation, an action which requires parameters
must accept them enclosed in a structure.
Some actions require a single, trivial type parameter, but it still
must be enclosed in a structure.
This obligation results in multiple, action-specific structures, each
containing a single trivial type parameter.
This patch introduces a new approach, allowing an action configuration
object of any type, trivial or a structure.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
