Rename the RTE_PCI_DRV_NEED_IGB_UIO to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If igb_alloc_rx_queue_mbufs() would fail to allocate an mbuf for RX queue,
it calls igb_rx_queue_release(rxq).
That causes rxq to be silently freed, without updating
dev->data->rx_queues[].
So any further reference to it will trigger the SIGSEGV.
Same thing in em PMD too.
To fix: igb_alloc_rx_queue_mbufs() should just return an error to the
caller and let upper layer to deal with the probem.
That's what ixgbe PMD is doing right now.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_update" in the PMD API to dynamically
update the RSS flags and/or the RSS key used by a NIC to compute the RSS
hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
the argument that contains the new hash flags and/or the new hash key to
use.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_update" and the
igb-specific function "eth_igb_rss_hash_update" to update the RSS
hash configuration of ixgbe and igb controllers respectively.
Before changing anything, these 2 functions check that the update RSS
operation does not attempt to disable RSS, if RSS was enabled at port
initialization time, or does not attempt to enable RSS, if RSS was
disabled at port initialization time.
Note:
Configuring the RSS hash flags and the RSS key used by a NIC consists in
updating appropriate PCI registers of the NIC.
These operations have been manually tested with the interactive commands
"write reg" and "write regbit" of the testpmd application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
e1000_vfadapt type corresponds to 82576 VF devices,
check e1000_set_mac_type() for more details.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
When latest Linux ixgbe PF is used, and DPDK VF is used in DPDK application,
jumbo frames are not received.
Also - if Linux ixgbe PF has MTU set to 1500 (default),
then normal sized packets can be received by DPDK VF.
However, if Linux PF has MTU > 1500, then DPDK VF receives no packets
(normal or jumbo).
With ixgbe_mbox_api_10 ixgbe simply didn't allow set VF MTU > 1514 for 82599.
With ixgbe_mbox_ajpi_11 it does, though now, if PF uses jumbo frames,
it simply disables RX for all VFs.
So to work with PF ithat using jumbo frames, at startup each VF has to:
1. negotiate with PF mbox_api_11.
2. Send to PF SET_LPE message with desired MTU.
Note, that if PF already uses MTU bigger then asked by the VF,
then PF wouldn't take any action.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
There was an indentation error in commit d93c252e88f2b29a5
"convert to use of PMD_REGISTER_DRIVER and fix linking"
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igbvf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igbvf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the igb pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the igb library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the e1000 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the e1000 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It may happen that DPDK application gets killed while having
acquired locks on the ethernet hardware, causing these locks to
be never released. On next restart of the application, DPDK
skip those ports because it can not acquire the lock,
this may cause some ports (or even complete board if SMBI is locked)
to be inaccessible from DPDK application until reboot of the
hardware.
This patch release locks that are supposed to be locked due to
an improper exit of the application.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add into the `rte_eth_stats` data structure 4 (64-bit) counters
of XOFF/XON pause frames received and sent on a given port.
Update em, igb, and ixgbe drivers to return the value of the 4 XOFF/XON
counters through the `rte_eth_stats_get` function exported by the DPDK
API.
Display the value of the 4 XOFF/XON counters in the `testpmd` application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Make device RX and TX offload capabilities to be returned in the
rte_eth_dev_info data structure by the function rte_eth_dev_info_get
The following initial set of RX offload capabilities are defined:
- VLAN header stripping
- IPv4 header checksum check
- UDP checksum check
- TCP checksum check
- TCP large receive offload (LRO)
The following initial set of TX offload capabilities are defined:
- VLAN header insertion
- IPv4 header checksum computation
- UDP checksum computation
- TCP checksum computation
- SCTP checksum computation
- TCP segmentation offload (Transmit Segmentation Offload)
- UDP segmentation offload
2) Update the eth_dev_infos_get() function of the igb and ixgbe PMDs
to return the offload capabilities which are supported by the
device and that are effectively managed by the driver.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since DPDK 1.4, if RTE_EAL_UNBIND_PORTS is disabled, igb_uio mapping is
done for all devices (commit eee16c964cd), breaking some non-Intel drivers.
But pci_uio_map_resource() should only be called for Intel devices
(using igb_uio kernel module).
The flag RTE_PCI_DRV_NEED_IGB_UIO is set for all those devices, even when
RTE_EAL_UNBIND_PORTS is disabled (fixes commit a22f5ce8fcc).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Damien Millescamps <damien.millescamps@6wind.com>
The 82576 has known issues which require the write threshold to be set to 1.
See:
http://download.intel.com/design/network/specupdt/82576_SPECUPDATE.pdf
If not then single packets will hang in transmit ring until more arrive.
Simple tests like ping will fail.
The workaround was in the wrong file (commit a30ebfbb8c3a).
Move it in igb one to restore original patch (7e9e49feea).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It should be possible to enable RSS with one Rx queue.
RSS hash can be useful independently of the number of Rx queues.
Applications can use RSS hash to identify different IP flows.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
As explained in rte_ethdev.h, ETH_MQ_RX_NONE allows to not choose RSS, DCB
or VMDQ mode.
But the igb/ixgbe code always silently select the RSS mode with ETH_MQ_RX_NONE.
This patch fixes this incoherence between the API and the implementation.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
ICC requires an initializer be given for the static variables,
so adding one in cases where one wasn't previously given.
This problem was introduced in commit e8ae856140bce4e
(fix index overflow when resetting big queues).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rings are resetted with a loop because memset cannot be used without
issuing a warning about volatile casting.
The index of the loop was a 16-bit variable which is sufficient for
ring entries number but not for the byte size of the whole ring.
The overflow happens when rings are configured for 4096 entries
(descriptor size is 16 bytes). The result is an endless loop.
It is fixed by indexing ring entries and resetting all bytes of the entry
with a simple assignment.
The descriptor initializer is zeroed thanks to its static declaration.
There already was a fix for ixgbe Tx only
(commit bcf457f8c0d64a5cb094fd55836b324bddb930b6).
It is reverted to use the same fix everywhere (Rx/Tx for igb/ixgbe).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
The base driver supports more NICs:
- i210 flashless
- i217
- i218
- i354
The new features are not automatically used by the DPDK PMD.
Signed-off-by: Intel
In case of multi-process application, the secondary process can initialize
the driver without configuring queues. In this case the Rx/Tx functions
were not initialized because it was only done in queue setup.
Fix by reproducing the same behaviour as in eth_igb_dev_init().
Signed-off-by: Intel
When in 'normal' mode, hardware is designed to receive up to 1522 bytes.
When in 'jumbo' mode, RLPML register must be updated so that hardware accepts
a 802.1q vlan header. If dual vlan is enabled, then a second vlan header is
expected, so update RLPML register according to dual vlan support.
Signed-off-by: Intel
