Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
As part of device probe, check if management FW crash dump logs are
available. If available, then log an warning message and update the
epoch value too. A new struct ecore_mdump_info is added to populate
dump info including the new "reason" field by reading shared memory
region.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Current code does not close 'fd' on function exit, leaking resources.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Harish Patil <harish.patil@qlogic.com>
- Fix to use bitmapped values in NVM configuration for speed capability
advertisement. This issue is specific to 25G NIC since it is capable
of 25G and 10G speeds.
- Update feature list.
Fixes: 64c239b7f8b7 ("net/qede: fix advertising link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Fix to advertise device's link speed capability based on NVM
port configuration instead of returning driver supported speeds.
Fixes: 95e67b479506 ("net/qede: add 100G link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30b3 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
o Fix the fastpath status block index such that each queue pair shares
the same index value.
o Add ecore_vf_get_num_sbs() API that returns the number of status
blocks assigned by PF. Use that to decide how many VF queues can be
advertised. Additionally, restrict maximum number of VF queues to 16
for 100G VF case.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch fixes the base driver version display.
The driver version notation is:
<Base-Version_PMD-Version>
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
- fix to prevent duplicate VLAN filters
librte_ether does not keep track of VLAN filters
configured, so it becomes driver's responsibility to
keep track of it and prevent duplicate filter
programming. The fix is to use a singly linked
list for tracking the entries and there by prevent
duplicates.
- fix num vlan filters
Fix num vlan filter when filling Ethernet device information.
Fixes: 2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Replaced CONFIG_QED_BINARY_FW with CONFIG_ECORE_BINARY_FW.
Use CONFIG_ECORE_BINARY_FW and CONFIG_ECORE_ZIPPED_FW defines as
required.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
This patch adds the features to supports configuration of various Layer 2
elements, such as channels and filtering options.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The Qlogic Everest Driver for Ethernet(QEDE) Poll Mode Driver(PMD) is
the DPDK specific module for QLogic FastLinQ QL4xxxx 25G/40G CNA family
of adapters as well as their virtual functions (VF) in SR-IOV context.
This patch adds QEDE PMD, which interacts with base driver and
initialises the HW.
This patch content also includes:
- eth_dev_ops callbacks
- Rx/Tx support for the driver
- link default configuration
- change link property
- link up/down/update notifications
- vlan offload and filtering capability
- device/function/port statistics
- qede nic guide and updated overview.rst
Note that the follow on commits contain the code for the features mentioned
in documents but not implemented in this patch.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
