Upcoming FW increment API version to 1.11 due to new bit and new
fields in the Replace Cloud Filters AQ command.
Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
This patch adds the new filter types needed for custom cloud filters.
These custom cloud filters will route traffic to VFs based on the
dst IP for both tunneled and non-tunneled packets.
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Add I40E_RX_PTYPE_PARSER_ABORTED definition, so i40e driver will know
opcode for parser aborted packets.
Without this definition driver would have to rely on magic numbers.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Starting with API version 1.10 firmware for X722 devices has ability
to change FEC settings in PHY. Code added in this patch
checks API version and sets appropriate capability flag.
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The Flexible Metadata #4 and #5 in the Rx Flex Descriptor are defined to
extract the protocol specified fields or its offset. Its function relays
on the DDP package support in hardware.
Optimize to only check the hardware support when the user specifies the
'proto_xtr' devargs. And not require all the types need to be support in
hardware, otherwise if new protocol extraction type is introduced, it is
hard to maintain the compatibility. Just check the type support in need.
And the protocol IDs are 8 bits length, so the uint8_t is the right type
to be used. Also introduce the 'opcode' variable to specify the metadata
extraction type: it can be protocol fields or offset report.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
File mlx5_vlan.c contains Netlink APIs (Linux dependent) as part of VM
workaround implementation. Move this implementation to file
linux/mlx5_vlan_os.c. To remove Netlink dependency in header files
change pointer of type 'struct mlx5_nl_vlan_vmwa_context *' to 'void *'.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When updating a queue vlan stripping offload - either the WQ is modified
in Verbs or the RQ is modified in DevX. Add a vlan stripping modify
callback to 'struct mlx5_obj_ops' and assign it with the specific Verbs
and DevX implementations: 'rxq_obj_modify_wq_vlan_strip' and
'rxq_obj_modify_rq_vlan_strip' respectively.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Several DV-based structs of type 'struct mlx5dv_devx_XXX' are replaced
with 'void *' to enable compilation under non-Linux operating systems.
New getter functions were added to retrieve the specific fields that
were previously accessed directly.
Replaced structs:
'struct mlx5dv_pp *'
'struct mlx5dv_devx_event_channel *'
'struct mlx5dv_devx_umem *'
'struct mlx5dv_devx_uar *'
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Flow metering is supported only in direct rules (DR). Currently the APIs
of meter actions create and modify are under #ifdef
HAVE_MLX5_DR_CREATE_ACTION_FLOW_METER, while detaching the meter action
is executed unconditionally. This commit adds the same ifdef to API
mlx5_flow_meter_detach().
This commit avoids compilation failure of non-Linux operating systems
which do not support DR.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Remove utility macros INFO, WARN, ERROR. They are not in use and
conflict with identical definitions when compiled under Windows.
Fixes: 80f2d0ed7f ("net/mlx5: add hardware flow debug dump")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This commit adds Linux implementation of routine mlx5_os_mac_addr_flush
as wrapper to Netlink API to avoid direct calls under non-Linux
operating systems.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx5_get_ifname() prototype includes 'IF_NAMESIZE' definition from Linux
file net/if.h. Since this API is only used under Linux and to enable
compilation under non-Linux OS - move this prototype from shared file
mlx5.h to file linux/mlx5_os.h.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Enumerated variable REG_NONE (defined in mlx5_prm.h) is in conflict with
Windows definition (winnt.h): #define REG_NONE ( 0ul ) // No value type
To enable mlx5 PMD Windows compilation - rename REG_NONE as REG_NON.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
SIGIO maybe used by application, instead choose another rt-signal.
Linux allows any signal to be used for signal based IO.
Search for an unused signal in the available rt-signal range.
Add more error checking for fcntl and signal handling.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Negative array index read using variable 'i' as an index to array
'filter_info->pkt_filters'. Fixed by add return value check.
Coverity issue: 350364
Fixes: f4ca3fd54c ("net/hinic: create and destroy flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for querying Rx/Tx queue information.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, if there are not available Rx buffer descriptors in receiving
direction based on hns3 network engine, incoming packets will always be
dropped by hardware. This patch reports the '.rx_drop_en' information to
DPDK framework in the '.dev_infos_get', '.rxq_info_get' and
'.rx_queue_setup' ops implementation function.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
To manage header modify actions mlx5 PMD used the single linked list and
lookup and insertion operations took too long times if there were
millions of objects and this impacted the flow insertion/deletion rate.
In order to optimize the performance the hashed list is engaged. The
list implementation is updated to support non-unique keys with few
collisions.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The mlx5 PMD hashed list was designed in approach to contain the items
with unique keys only. Now there is the need to store the objects with
possible key collisions. It is not expected to have many collisions
(very likely to have a few ones), but keys become not unique.
This commit adds the hash list extended functions in order to support
insertion and lookup for the lists with non-unique keys.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The data from the host is trusted but checked by the driver.
One check that is missing is that the packet offset and length
might cause wraparound.
Cc: stable@dpdk.org
Reported-by: Nan Chen <whutchennan@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Long Li <longli@microsoft.com>
chim_index could potentially be used in other hn_txdesc when re-allocated.
Mark it as invalid to prevent stale value being used.
Fixes: cc02518132 ("net/netvsc: split send buffers from Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
netvsc uses rxbuf_info buffer to track received packets attached via
rte_pktmbuf_attach_extbuf() and ack the host based on usage count. It
uses the transaction_id in the VMBus packet to locate where to use
memory in the rxbuf_info.
This is not correct in multiple channel setup, as different channels may
return identical transaction_ids at a time, and may corrupt the
rxbuf_info buffer.
Fix this by defining rxbuf_info for each queue.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds a missing LLQ-related check in the
ena_com_is_doorbell_needed() routine, which is relevant for the feature
supported by the next generation HW of the ENA.
Fixes: b2b02edeb0 ("net/ena/base: upgrade HAL for new HW features")
CC: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Artur Rojek <ar@semihalf.com>
The rte_kernel_driver enum actually only pointed at PCI drivers and is
only used in the PCI subsystem.
Remove it from the generic device API and use a private enum in the PCI
code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This field was not generic as it was filled with PCI kernel drivers only.
It has no known in-tree user (and I could not find opensource projects
using it).
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove the deprecated buf_physaddr union field from rte_mbuf.
It is replaced with buf_iova which is at the same offset.
The single field buf_physaddr in rte_kni_mbuf is also renamed.
This concludes a 3-year process of semantic change.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the deprecated functions
- rte_mbuf_data_dma_addr
- rte_mbuf_data_dma_addr_default
which aliased the more recent functions
- rte_mbuf_data_iova
- rte_mbuf_data_iova_default
Remove the deprecated macros
- rte_pktmbuf_mtophys
- rte_pktmbuf_mtophys_offset
which aliased the more recent macros
- rte_pktmbuf_iova
- rte_pktmbuf_iova_offset
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the deprecated unioned fields phys_addr
from the structures rte_memseg and rte_memzone.
They are replaced with the fields iova which are at the same offsets.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The checks for libfdt try dependency() first which would only work if
a pkg-config would be present but libfdt has none.
Then it probes for the lib path itself via cc.find_library.
But later it adds the result of either probe to ext_deps which ends up
in build and also the resulting pkg-config to contain toolchain versioned
paths in Libs.private like:
/usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libfdt.so
which obviously breaks on toolchain updates.
In general libs used multiple times - ipn3ke + ifpga in this case - are
checked centrally in config/meson.build so move it there and fix the
adding of dependencies to not use the full file path.
The result is libfdt in pkg-config now showing up as:
Libs.private: -pthread -lm -ldl -lnuma -lfdt -lpcap
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
OVS-DPDK seems to set the reset bit for every flow query. Honor
the bit by resetting the SW counter values after assigning them.
Also set the 'hit' bit only if the counter value retrieved by HW
is non-zero.
While querying flow stats, use max possible entries in the fc table scan
for valid entries instead of active entries as the active entry can be in
any slot in the table.
This is a critical fix for OVS-DPDK flow aging.
Fixes: 306c2d28e2 ("net/bnxt: support count action in flow query")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Adjusted resource allocations for the hardware resources
like TCAM entries, action records, stat counters, exact match records to
scale up offload flows.
Also increased IPv4 nat entries to 1023.
This patch is a critical fix to enable driver load on current and all
FW versions going forward.
Fixes: cef3749d50 ("net/bnxt: update TruFlow resource allocation numbers")
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Different device has different hash capability, it should not be
expected that all hash set would be successful to set into all
devices by default. So remove the return checking when hash default
set. And remove gtpu hash default set, iavf only enable hash for
general protocols.
Fixes: c94366cfc6 ("net/iavf: add GTPU in default hash")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Wei Xie <weix.xie@intel.com>
The two fixes are not the real root cause for MDD event, it mitigates
the failure rate when different test mode, so revert them.
Fixes: 2a0c9ae4f6 ("net/ice: fix TCP checksum offload")
Fixes: 7365a3cee5 ("net/ice: calculate TCP header size for offload")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The variables 'td_offset' and 'td_tag' should be reset to 0 for every
burst packet, otherwise the fields of Tx Descriptor will be set wrong,
this will cause the MDD event error, and Tx will hang.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The code should look into "slab" to figure out the index returned from
rte_bitmap_scan().
Fixes: cc02518132 ("net/netvsc: split send buffers from Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When parameter reta_size < RTE_RETA_GROUP_SIZE, reta_count will be 0.
Then this function will be deadloop.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Zhiguang He <hezhiguang3@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Previous fix added definition of number of retries for UAR allocation.
This value is adequate for x86 systems with 4K pages.
On Power9 system with 64K pages the required value is 32.
This patch updates the defined value from 2 to 32.
Fixes: a0bfe9d56f ("net/mlx5: fix UAR memory mapping type")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Commit cc02518132 ("net/netvsc: split send buffers from Tx
descriptors") changed the way that transmit descriptors are
allocated. They come from a single pool instead of being
individually attached to each mbuf. To find the IOVA, you need
to calculate the offset from the base of the pool.
Fixes: cc02518132 ("net/netvsc: split send buffers from Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Store port_id in pmd_internals when eth kni device is created.
Then set packet port of rte_mbuf in function eth_kni_rx.
Cc: stable@dpdk.org
Signed-off-by: Jecky Pei <jpei@sonicwall.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To detect the timestamp mode configured on the NIC the mlx5
PMD uses the firmware command ACCESS_REGISTER_USER. This
command is relatively new and might be not supported by
older firmware versions and was rejected, causing annoying
messages in kernel log.
This patch adds the attribute flag check whether firmware
supports the command and avoid the call if it does not.
Fixes: bb7ef9a962 ("common/mlx5: add register access DevX routine")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Setting the flags of tapfd may fail and the return value
should be checked.
Coverity issue: 140739
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
At .new_device() time, only the first vring pair is
now ready, other vrings are configured later.
Problem is that when application will setup and enable
interrupts, only the first queue pair Rx interrupt will
be enabled.
This patches fixes the issue by setting the number of
max interrupts to the number of Rx queues that will be
later initialized. Then, as soon as a Rx vring is ready
and interrupt enabled by the application, it removes the
corresponding uninitialized epoll event, and installs a
new one with the valid FD.
Fixes: 604052ae53 ("net/vhost: support queue update")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Now that the vhost library saves the guest notifications
enablement value in its virtqueues metadata, it is not
necessary to do it in the vring_state_changed callback.
One effect of the patch is also to prevent possible
deadlock happening in vhost library.
Fixes: 604052ae53 ("net/vhost: support queue update")
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Remove the memory management scheme for Extended Exact Match
using system memory. Using host memory scheme instead which
was the default anyway.
Fixes: b2da02480c ("net/bnxt: support EEM system memory")
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
The ice needs the exact TCP header size including options for TCP
checksum offload, but according to PKT_TX_TCP_CKSUM note, l4_len
is not required to be set, so it needs to calculate the TCP header
size if not set.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When adding a RSS rule with GTPU_DWN/UP, it will write from top to
bottom for profile due to firmware limitation. If a RSS rule with
GTPU_EH already exists, then GTPU_DWN/UP packet will match GTPU_EH
profile. This patch solves this issue by remembering a gtpu_eh RSS
configure and removing it before the corresponding RSS configure
for downlink/uplink rule is issued.
Fixes: 2e2810fc18 ("net/ice: fix GTPU RSS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The function rte_zmalloc() could return NULL, the return
value need to be checked.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
At the end of the vsi release, we should free the 'rss_lut'
and 'rss_key' for the vsi.
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes the coverity warning #361024.
rte_bitmap_free() is not a right way to free a bitmap, replacing
it with rte_free().
Coverity issue: 361024
Fixes: febc61d350 ("net/i40e: optimize flow director update rate")
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The L4LEN field of the Descriptor Header Offset for TCP should be the
real length including the TCP options.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Apart from the virtio status, there should be also a network related
status for link status management, current implementation mixes up these
two statuses.
One issue caused by this mixup is when virtio-user running in server mode
and vhost as a client connects to it, a RARP packet will be generated by
virtio-user due to VIRTIO_NET_S_ANNOUNCE bit is detected in the "status"
in interrupt handler.
VIRTIO_NET_S_LINK_UP and VIRTIO_NET_S_ANNOUNCE should be managed by a
separated field. This patch adds a "net_status" field for this purpose.
Fixes: e9efa4d938 ("net/virtio-user: add new virtual PCI driver")
Cc: stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When we compile PMD with CFLAGS set to -O -g, build fails because of
uninitialized error. This patch fixes it.
Bugzilla ID: 509
Fixes: 1e46b39626 ("net/bnxt: fill cfa action in Tx descriptor")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
The if condition in bnxt_restore_mac_filters needs to check for
the result of logical AND. But it was not doing it resulting in
an incorrect check.
Fixes: b02f1573cd ("net/bnxt: restore MAC filters during reset recovery")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
No need to access rx_cfa_code, cfa_code_map from the VF-Rep functions
anymore.
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Turn on shadow memory in the core to allow search before allocate.
This allows reuse of constrained resources.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Search before alloc allows reuse of constrained resources such as tcam,
encap, and source modifications. The new templates will search the
entry and alloc only if necessary.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for tcam table processing to enable the search
and allocate support. This also includes the tcam entry update
support.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Truflow stack adds VFR to VF and VF to VFR conduits when VF
representor is created. However, in the ingress direction the
VF's fw rules conflict with Truflow rules, resulting in not hitting
the Truflow VFR rules. To fix this, fw is going to remove it’s
VF rules when vf representor is created in Truflow mode and will
restore the removed rules when vf representor is destroyed.
This patch invokes the vf representor alloc and free hwrm commands
as part of which fw will do the above mentioned actions.
Fixes: 1e18ec58ed ("net/bnxt: create default flow rules for port reprentor")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, the flow_ids of port_to_app/app_to_port & tx_cfa_action
for the first port are getting over-written by the second port because
these fields are stored in the ulp context which is common across the
ports.
This patch fixes the problem by having per port structure to store these
fields.
Fixes: 9f702636d7 ("net/bnxt: add port default rules for ingress and egress")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Modified ulp mapper to use the new tf_search_tbl_entry API.
When search before allocation is requested, mapper calls
tc_search_tbl_entry with the alloc flag.
- On HIT, the result and table index is returned.
- On MISS, the table index is returned but the result is
created and the table entry is set.
- On REJECT, the flow request is rejected.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Added Index Table shadow tables for searching
- Added Search API to allow reuse of Table entries
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Removed the hash calculation from tf_shadow_tcam in favor of using a
new common implementation.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added egress template with VLAN tag match
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
This is a work around for the OVS setting offload rules that
are passing vlan priority mask as wild card and currently we
do not support it.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
The parif for the egress rules need to be dynamically
configured based on the port type.
PARIF is handler to a partition of the physical port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
The template is updated to support additional combinations
of NAT actions.
Fixes: 2951f7f311 ("net/bnxt: support NAT action items")
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When a packet is looped back from VF to VFR, it is marked to identify
the VFR interface. However, this mark_id shouldn't be percolated up to
the OVS as it is internal to pmd.
This patch fixes it by skipping mark injection into mbuf if the packet
is received on VFR interface.
Fixes: 6dc83230b4 ("net/bnxt: support port representor data path")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Added TruFlow hash API for common hash uses across TruFlow
core functions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Modified ulp mapper to use the new tf_search_tcam_entry API.
When search before allocation is requested, mapper calls
tc_search_tcam_entry with the alloc flag.
- On HIT, the result and tcam index is returned.
- On MISS, the tcam index is returned but the result is
created and the tcam entry is set.
- On REJECT, the flow request is rejected.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
PARIF is handler to a partition of the physical port.
For the offload miss rules, the parif miss path needs to be
considered. The higher parif are reserved for handling this.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to enable or disable the NAT global registers.
The NAT feature is enabled in hardware during initialization
and disabled at deinitialization of the application.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add TCAM shadow tables for searching
- Add Search API to allow reuse of TCAM entries
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
RXQ interrupts under Linux are based on the epoll mechanism. An
expected order of operations is as follows:
1. Call rte_eth_dev_rx_intr_enable(), to arm the CQ for receiving events
on data input.
2. Block on rte_epoll_wait() with an array of file descriptors
representing the CQ events. Upon data arrival the kernel will signal an
input event on the corresponding CQ fd.
3. Call rte_eth_dev_rx_intr_disable() after the event was received and
continue in polling mode. The mlx4 implementation of
rte_eth_dev_rx_intr_disable() is to get the CQ event and ack it.
In practice applications may wake up from rte_epoll_wait() due to
timeout with no event to ack but still call
rte_eth_dev_rx_intr_disable() unconditionally. In such cases the call
should return EAGAIN (since the file descriptors are non-blocked), as
opposed to EINVAL which indicates a real failure. In case of EAGAIN the
PMD should not warn on "unable to disable interrupt on rx queue".
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The function rte_zmalloc() could return NULL, the return
value need to be checked.
Fixes: f4ca3fd54c ("net/hinic: create and destroy flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace gettimeofday() with clock_gettime(CLOCK_MONOTONIC_RAW, &now),
the reason is same with
commit d08d304508 ("eal/linux: make alarm not affected by system time
jump")
Fixes: 81d53291a4 ("net/hinic/base: add various headers")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
For ovs offload scenario, when fw processes the virtio header,
there is no need to offset; and for standard card scenarios,
fw does not care about the vhd_type parameter, so in order to
be compatible with these two scenarios, use 0 offset instead.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
For x86 platform, the rq cqe without cache aligned, which can
improve performance for some gateway scenarios.
Fixes: 361a9ccf81 ("net/hinic: optimize Rx performance")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Recent patch added creation of Rx CQ using DevX API.
The reading of events from DevX channel was not done correctly.
This patch fixes the event reading, using the correct data structure.
Cleanup after CQ creation, in case of error, is also updated.
Fixes: 08d1838f64 ("net/mlx5: implement CQ for Rx using DevX API")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
An invalid rule should not be validated successfully. If the rule is not
in the supporting list, just return failure to application.
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
We don't support SCTP in PPPoE RSS, remove it.
Fixes: d117de4600 ("net/ice: fix GTPU/PPPoE packets with no hash value")
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
A new symmetric RSS rule may force another asymmetric rule to be
symmetric, vice versa. The reason is due to the flow engine will
try to reuse the existing profile if the input set matches with the
new rule. The fix is to disable this optimization for RSS since we
are not at the situation as profile shortage.
Fixes: ddae044035 ("net/ice/base: enable symmetric hash for RSS")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
This patch enable i40e outer vlan strip on and off in QinQ
mode with mask bit of DEV_RX_OFFLOAD_QINQ_STRIP, users can
use "vlan set qinq_strip on 0" to enable or "vlan set
qinq_strip off 0" to disable i40e outer vlan strip when
try with testpmd app.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Other PMDs may be using the mempool, so don't free it when destroying the
UMEM.
Fixes: d8a210774e ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
The ConnectX NICs can transfer data from the host memory with two
approaches: provide the pointer to the data buffer, or do data inline
- copy the data to the transmit descriptor (WQE) entirely or only the
part of data. In some configurations the NIC hardware requires the
minimal data to be inline in the descriptor to operate correctly. And
there is the special dynamic flag to hint PMD not to inline the data
(for example, if buffer is located on some other device - storage or
GPU) on per packet basis.
If there was a packet with length shorter than the minimal inline data
length requested by the NIC hardware and the no-inline hint was set
the PMD tried to inline the packet with minimal required length
instead of actual packet's one. This patch adds the missed length
check into no-inline hint handling branch.
Fixes: cacb44a099 ("net/mlx5: add no-inline Tx flag")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There was the typo introducing the bug, affected the mlx5 vectorized
rx_burst on ARM architectures in case if CQE compression was enabled.
Fixes: 6c55b622a9 ("net/mlx5: set dynamic flow metadata in Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The User Access Region is a special mechanism to provide direct
access to the hardware registers, and is the part of PCI address
space that is mapped to CPU virtual address. The mapping can be
performed with the type "Write-Combining" or "Non-Cached", and
these ones might be supported or not on different setups.
To prevent device probing failure the UAR allocation attempt
with alternative mapping type is performed. The datapath
takes the actual UAR mapping into account on queue creation.
There was another issue with NULL UAR base address.
OFED 5.0.x and Upstream rdma_core before v29 returned the NULL as
UAR base address if UAR was not the first object in the UAR page.
It caused the PMD failure and we should try to get another UAR
till we get the first one with non-NULL base address returned.
Fixes: fc4d4f732b ("net/mlx5: introduce shared UAR resource")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The hash look up table (LUT) is managed by global register but it is not
initialized when RSS is disabled. Once user wants to enable RSS during
runtime, the LUT will not be initialized.
This patch fixes the issue by initializing the LUT whatever RSS enabled
or not.
Fixes: feaae285b3 ("net/i40e: support hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The combined hash type should be bound with prefix protocol when
configure it, so delete some useless and unsupported part for
rss types mapping.
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
