Since rte_mcslock APIs were introduced in 19.08 release,
it is now possible to remove the experimental tag from:
rte_mcslock_lock()
rte_mcslock_unlock()
rte_mcslock_trylock()
rte_mcslock_is_locked()
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Phil Yang <phil.yang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
The devtools/get-maintainer.sh script does not work with examples
because there is no title line between them: it returns a longer list
than expected.
Add the missing titles for each example to fix this behavior.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The stack library was first released in 19.05, and its interfaces have been
stable since their initial introduction. This commit promotes the full
interface to stable, starting with the 20.11 major version.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Move libefx (base driver) into common driver.
Prepare to add vDPA driver which will use the common driver as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add new example application to showcase the API of the newly
introduced SWX pipeline type.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch updates Mellanox maintainers mails from
the Mellanox domain to Nvidia domain.
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Removed the documentation maintainers.
The documentation is now, currently, unmaintained.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Co-work with Jeff, setting me as new maintainer for igb, igc and ixgbe.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The BPF lib was introduced in 18.05.
There were no changes in its public API since 19.11.
It should be mature enough to remove its 'experimental' tag.
RTE_BPF_XTYPE_NUM is also being dropped from rte_bpf_xtype to
avoid possible ABI problems in the future.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Make is no longer supported for compiling DPDK, scripts used with make
are no longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The git trees dpdk-next-qos and dpdk-next-pipeline were created
to share the load of patches merging.
It has been decided in the Technical Board that the load is not big
enough to justify keeping these repositories.
The patches for ethdev TM and MTR will be managed in dpdk-next-net.
The sched and meter libraries will be managed in the main tree.
The packet framework will be managed in the main tree as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Chenbo has done an excellent job in reviewing,
contributing and testing patches.
This patch adds him as co-maintainer for Vhost, Virtio
and vDPA components.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
The script checkpatch.pl (used in checkpatches.sh) can use a dictionary
from the codespell project to check spelling.
There are multiple dictionaries to be used.
The script build-dict.sh concatenate multiple dictionaries and remove
some annoying false positives.
The dictionary built by this script must be saved in a file which
is referenced with the environment variable DPDK_CHECKPATCH_CODESPELL.
The easiest is to export this variable in ~/.config/dpdk/devel.config.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Setting Martin Spinler as new and only maintainer for Netcope
libsze2/nfb drivers
Signed-off-by: Jakub Neruda <neruda@netcope.com>
Acked-by: Martin Spinler <spinler@cesnet.cz>
DPDK allows calling some part of its API from a non-EAL thread but this
has some limitations.
OVS (and other applications) has its own thread management but still
want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and
faking EAL threads potentially unknown of some DPDK component.
Introduce a new API to register non-EAL thread and associate them to a
free lcore with a new NON_EAL role.
This role denotes lcores that do not run DPDK mainloop and as such
prevents use of rte_eal_wait_lcore() and consorts.
Multiprocess is not supported as the need for cohabitation with this new
feature is unclear at the moment.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The experimental tags were removed, but the comment
is still having API classification as EXPERIMENTAL
Fixes: 931cc531aa ("rawdev: remove experimental tag")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Ahead of changes to rework the file, move the pkg-config file generation to
a new directory under buildtools. This allows the meson code to be
separated out from the main meson.build for simplicity, and also allows any
additional scripts for working with the pkg-config files to be placed there
too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
I will leave Intel soon and likely won't have dedicated time for
maintainership, so removing my name from all related maintainer roles.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
The MinGW build for Windows has special cases where exported
function contain additional prefix:
__emutls_v.per_lcore__*
To avoid adding those prefixed functions to the version.map file
the map_to_def.py script was modified to create a map file for MinGW
with the needed changed.
The file name was changed to map_to_win.py and lib/meson.build map output
was unified with drivers/meson.build output
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Add test cases for setting bit, clearing bit, testing
and setting bit, testing and clearing bit operation.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Bitwise operation APIs are defined and used in a lot of PMDs,
which caused a huge code duplication. To reduce duplication,
this patch consolidates them into a common API family.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Basic memory management supports core libraries and PMDs operating in
IOVA as PA mode. It uses a kernel-mode driver, virt2phys, to obtain
IOVAs of hugepages allocated from user-mode. Multi-process mode is not
implemented and is forcefully disabled at startup. Assign myself as a
maintainer for Windows file and memory management implementation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add hugepages discovery ("large pages" in Windows terminology)
and update documentation for required privilege setup. Only 2MB
hugepages are supported and their number is estimated roughly
due to the lack or unstable status of suitable OS APIs.
Assign myself as maintainer for the implementation file.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Code in Linux EAL that supports dynamic memory allocation (as opposed to
static allocation used by FreeBSD) is not OS-dependent and can be reused
by Windows EAL. Move such code to a file compiled only for the OS that
require it. Keep Anatoly Burakov maintainer of extracted code.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Introduce OS-independent wrappers in order to support common EAL code
on Unix and Windows:
* eal_file_open: open or create a file.
* eal_file_lock: lock or unlock an open file.
* eal_file_truncate: enforce a given size for an open file.
Implementation for Linux and FreeBSD is placed in "unix" subdirectory,
which is intended for common code between the two. These thin wrappers
require no special maintenance.
Common code supporting multi-process doesn't use the new wrappers,
because it is inherently Unix-specific and would impose excessive
requirements on the wrappers.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Adding Xavier as additional maintainer to bonding.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Since we've moved away from our initial validate-abi.sh script,
in favor of check-abi.sh, which uses libabigail,
remove the old script from the tree, and update the docs accordingly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add new test-case to measure performance of
IPsec data-path functions.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a python script that can be used with the new telemetry
socket. It connects as a client to the socket, and allows the user send
a command and see the JSON response.
The example usage below shows the script connecting to the new telemetry
socket, and sending three default telemetry commands entered by the user.
The response for each command is shown below the user input.
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 32794, "max_output_len": 16384}
--> /
{"/": ["/", "/help", "/info"]}
--> /info
{"/info": {"version": "DPDK 20.05.0-rc0", "pid": 32794, \
"max_output_len": 16384}}
--> /help,/info
{"/help": {"/info": "Returns DPDK Telemetry information. \
Takes no parameters"}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The functions added in this patch will make it easier for telemetry
to convert data to correct JSON responses to telemetry requests.
Tests are also added for these json utility functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Adding programmer's guide for Graph library and the inbuilt nodes.
This patch also updates the release note for the new libraries.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add graph based l3fwd application skeleton with cmdline
parsing support inline with normal l3fwd.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Adding the unit test to test the functionality of node and graph APIs.
Testing includes registering a node, cloning a node, creating a graph,
perform graph walk, collecting stats and all node and graph debug APIs.
example command to test:
echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Replace Wenzhuo Lu, Alvin Zhang and Konstantin Ananyev
with Wei Zhao and Jeff Guo.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Alvin Zhang <alvinx.zhang@intel.com>
Updating ARM v7 and v8 maintainer. Gavin is leaving Arm.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Add checks during build to ensure that all symbols in the INTERNAL
version map section have __internal tags on their definitions, and
enable the warnings needed to announce their use.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Currently, there is no documentation for VMDq example,
this path added the user guide for VMDq.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Add programmer's guide for trace library support.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Example commands to run UT and check the traces with babeltrace viewer.
- Delete the existing /root/dpdk-traces/ directory if needed.
> sudo rm -rf /root/dpdk-traces/
- Start the dpdk-test
> sudo ./build/app/test/dpdk-test -c 0x3 - --trace=.*
- Run trace_autotest
> trace_autotest
- View the traces with babletrace viewer.
> sudo babeltrace /root/dpdk-traces/
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The consumers of trace API defines the tracepoint and registers
to eal. Internally these tracepoints will be stored in STAILQ
for future use. This patch implements the tracepoint
registration function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Define the public API for trace support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the trace subsystem.
The 8 bytes tracepoint object is a global variable, and can be used in
fast path. Created a new __rte_trace_point section to store the
tracepoint objects as,
- It is a mostly read-only data and not to mix with other "write"
global variables.
- Chances that the same subsystem fast path variables come in the same
fast path cache line. i.e, it will enable a more predictable
performance number from build to build.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch introduces set of unit tests of librte_security API functions.
Tests are added to dpdk-test application and can be run with
"security_autotest" runtime command.
This is the first patch in the series of patches as adding all test cases
for all API functions in a single patch would make it unreadable.
This patch defines structure of the file and necessary test framework
initialization. It also contains first subset of unit tests for
rte_security_session_create API function.
Structure of the tests file is following:
- macros for making tests more readable;
- mockup structures and functions for rte_security_ops;
- test suite and test cases setup and teardown functions;
- tests functions;
- declaration of testcases.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The virtual PMDs bonding, KNI, null, ring, softnic and vdev_netvsc
have no real feature to advertise so they can be removed
from the (too) big matrix of ethdev features.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Meson is detecting the path /proc/sys/vm/nr_hugepages in the call to cat
in app/test/meson.build and then adding it as a build dependency.
This causes build loop if the timestamp of this file keeps changing.
It is fixed by hiding hugepage check in a shell script.
Fixes: 77784ef0fb ("test: allow no-huge mode for fast-tests")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since the kernel modules are moved to kernel/ directory,
there is no need anymore for the sub-directory eal/ in
linux/, freebsd/ and windows/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/arch/
are moved at the same level as the OS-specific directories.
It makes more clear that EAL is covering a matrix combining OS and arch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When moving files to the directory kernel/,
the file BSDmakefile.meson was left in eal/.
Also the intermediate makefiles in linux/ and freebsd/ became useless.
Fixes: acaa9ee991 ("move kernel modules directories")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Honnappa and Konstantin contributed actively to the ring library
and volunteered to replace myself as maintainers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
I volunteer to be co-maintainer for Vhost-user/Vhost PMD/Virtio PMD.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
I'm leaving Intel, and I'm not sure when I could dedicate enough
time to DPDK in the future. So I'm removing my name from the
MAINTAINERS file.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Moved title syntax to a separate file so that it improves code
readability and allows easy addition.
Also logic changed from checking for bad pattern to checking good
pattern which documents the expected syntax more clearly, and does not
have gaps in the checks.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
EditorConfig is a file format and collection of text editor plugins for
maintaining consistent coding styles between different editors and IDEs.
Initialize the file following the coding rules in
doc/guides/contributing/coding_style.rst,
doc/guides/contributing/documentation.rst and
doc/guides/contributing/patches.rst.
In order for this file to be taken into account (unless they use an
editor with built-in EditorConfig support), developers will have to
install a plugin.
Note: The max_line_length property is only supported by a limited number
of EditorConfig plugins. It will be ignored if unsupported.
Add this new file in MAINTAINERS in the "Developers and Maintainers
Tools" section.
Link: https://editorconfig.org/
Link: https://github.com/editorconfig/editorconfig-emacs
Link: https://github.com/editorconfig/editorconfig-vim
Link: https://github.com/editorconfig/editorconfig/wiki/EditorConfig-Properties#max_line_length
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
The netuio driver will be hosted in a separate repository:
http://git.dpdk.org/dpdk-kmods/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Narcisa Vasile <navasile@microsoft.com>
Introduce new application to provide user to evaluate and perform
custom functional and performance tests for FIB library.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The tree dpdk-next-tm does not exist anymore.
Traffic management and metering APIs, which are part of ethdev,
can be merged in the existing tree dpdk-next-qos.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.
meson -Ddisable_drivers=crypto/*,event/* build
to do a build omitting all the crypto and event drivers. Explicitly
specified drivers e.g. net/i40e, work as before, and can be mixed with
wildcarded drivers as required.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This routine returns true if given rte_eth_dev is security offload
capable and belongs to octeontx2.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A new Mellanox vdpa PMD will be added to support vdpa operations by
Mellanox adapters.
This vdpa PMD design includes mlx5_glue and mlx5_devx operations and
large parts of them are shared with the net/mlx5 PMD.
Create a new common library in drivers/common for mlx5 PMDs.
Move mlx5_glue, mlx5_devx_cmds and their dependencies to the new mlx5
common library in drivers/common.
The files mlx5_devx_cmds.c, mlx5_devx_cmds.h, mlx5_glue.c,
mlx5_glue.h and mlx5_prm.h are moved as is from drivers/net/mlx5 to
drivers/common/mlx5.
Share the log mechanism macros.
Separate also the log mechanism to allow different log level control to
the common library.
Build files and version files are adjusted accordingly.
Include lines are adjusted accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or RTE_SCHED_TYPE_PARALLEL
through:
`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
`--eventq-sched="parallel"`
Allow the user to specify the number of Rx queues to be connected to
event queue using:
`--event-eth-rxqs`
Poll mode is still the default operation mode.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Without a git tree, the "guess" script from dpdk-ci will ignore all files
that are referenced in those sections and let a patchset land in any
subtree.
Changes in the EAL, mbuf, mempool... go through the main repository.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mark librte_meter and librte_sched as being handled in the dpdk-next-qos
subtree.
The packet framework bits go through dpdk-next-pipeline.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Changes on the main test applications should be considered against
subtrees where most of the API changes and development happen:
- testpmd goes through dpdk-next-net as it is mainly about ethdev,
- dpdk-test-compress-perf goes through dpdk-next-crypto since the
compress API goes through this tree,
- dpdk-test-crypto-perf through dpdk-next-crypto,
- dpdk-test-eventdev through dpdk-next-eventdev,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since Anand is no longer with Intel, Pallavi will replace him
as maintainer.
Signed-off-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Unfortunately due to lack of time, I've been unable to even participate to
flow API discussions for several months. Better make it official since this
is not going to improve anytime soon.
This doesn't mean I won't contribute to rte_flow in the future!
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Meson versions 0.52 and 0.53 are being overly smart and detecting the path
"/sys/devices/system/cpu/present" in the call to cat in
app/test/meson.build and then adding it as a dependency to the build
configuration. This causes issues on systems where the timestamp of that
file always returns the current time, since it means that the build.ninja
file is always out of date, and therefore needs to be rebuilt.
We can fix this by just using a simple shell script to return the coremask
appropriately for BSD and Linux, and removing that code logic from meson -
thereby hiding the use of the /sys file.
Fixes: c70622ac6f ("test: detect number of cores with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Change the iavf base code as driver common library, it is used by iavf
PMD now, and it can be used by other Intel SR-IOV PMDs in the future.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
I volunteer to be co-maintainer for the rte_flow lib.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently I am the main committer of dpdk-next-net-intel tree.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The vDPA (vhost data path acceleration) drivers provide support for
the vDPA operations introduced by the rte_vhost library.
Any driver which provides the vDPA operations should be moved\added to
the vdpa class under drivers/vdpa/.
Create the general files for vDPA class in drivers and in documentation.
The management tree for vDPA drivers is
git://dpdk.org/next/dpdk-next-virtio.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Those scripts are only used by developers and not part of the build
process.
Move them to devtools so they are not installed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
It is expected to update this PMD to be in line with Arm's crypto library.
Update the maintainership to refect the change.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As Alejandro is no longer with Netronome we appointed two new
maintainers for the Netronome PMD
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Claim maintainership of examples/ptpclient/
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a shell script that checks whether built libraries are
versioned with expected ABI (current ABI, current ABI + 1,
or EXPERIMENTAL).
The following command was used to verify current source tree
(assuming build directory is in ./build):
find ./build/lib ./build/drivers -name \*.so \
-exec ./buildtools/check-abi-version.sh {} \; -print
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In order to facilitate mass updating of version files, add a shell
script that recurses into lib/ and drivers/ directories and calls
the ABI version update script.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add a script that automatically merges all stable ABI's under one
ABI section with the new version, while leaving experimental
section exactly as it is.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Separate versioning.rst into abi versioning and abi policy guidance, in
preparation for adding more detail to the abi policy. Add an entry to the
maintainer file for the abi policy.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A Vhost-blk example that support inflight feature. It uses the
new APIs that introduced in the first patch, so it can show how these
APIs work to support inflight feature.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Added guide for IOAT sample app usage and code description.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A new sample app demonstrating use of driver for CBDMA. The app receives
packets, performs software or hardware copy, changes packets' MAC addresses
(if enabled) and forwards them. The change covers ports initialization,
closing connection and argument parsing.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The compat.h header file provided macros for two purposes:
1. it provided the macros for marking functions as rte_experimental
2. it provided the macros for doing function versioning
Although these were in the same file, #1 is something that is for use by
public header files, which #2 is for internal use only. Therefore, we can
split these into two headers, keeping #1 in rte_compat.h and #2 in a new
file rte_function_versioning.h. For "make" builds, since internal objects
pick up the headers from the "include/" folder, we need to add the new
header to the installation list, but for "meson" builds it does not need to
be installed as it's not for public use.
The rework also serves to allow the use of the function versioning macros
to files that actually need them, so the use of experimental functions does
not need including of the versioning code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
This example can be removed because DPDK now has a range
of libraries, especially rte_eventdev, that did not exist
previously for load balancing, making this less relevant.
Also, modern NIC cards have greater ability to do load balancing,
e.g. using RSS, over a wider range of fields than earlier cards did.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Rather than providing a shim layer on top of netmap,
we should instead encourage users to create apps using
the DPDK APIs directly.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Original DPDK rings code had explicit support for a
single watermark per-ring, but more recent releases of
DPDK had a more general mechanism where each enqueue
or dequeue call could return the remaining elements/free-slots
in the ring.
Therefore, this example is not as relevant as before and can be removed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The main l3fwd app should work with both PF and VF devices, so remove the
VF-only l3fwd example.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The example app shows the use of TUN/TAP with DPDK, but DPDK has a built-in
TAP PMD, so this example is obsolete and so can be removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This example is too old and SPDK will not maintain this example
anymore. Also SPDK has submitted a new vhost example vhost-blk.
We will keep on maintaining vhost-blk and It shows the packed
ring and live recovery support.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adding vendor specific sub-tree for Broadcom drivers.
The next-net-brcm sub-tree will be sub-tree of the next-net.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Introduce new application to provide user to evaluate and perform
custom functional and performance tests for IPsec SAD implementation.
According to our measurements on SKX for 1M entries average lookup
cost is ~80 cycles, average add cost ~500 cycles.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
add unittests for ipsec SAD library
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add build infrastructure and documentation
update for arm64 JIT support.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add Igor Chauskin from the Amazon as another maintainer of the driver.
Igor is another person from the Amazon team that is responsible for the
ENA DPDK driver.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
David will be co-maintaining the top level tree with Thomas,
Welcome and best luck J
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add myself as co-maintainer to EFD library to replace Pablo.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
