Swap subsystem vendor id and subsystem device id.
Parse the SPDRP_HARDWAREID string with correct type values.
Fixes: b762221ac2 ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
current support will build vdev with empty MP functions
currently unsupported for Windows.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
rte_smp_mb() uses the same locked ADD as the in-kernel vmbus driver,
and it has slightly performance improvement over rte_mb().
Signed-off-by: Long Li <longli@microsoft.com>
While uninitalizing the driver, the comment was mentioning
initialized instead of uninitalized in description of parameter.
Fixes: 0fe11ec592 ("eal: add vdev init and uninit")
Cc: stable@dpdk.org
Signed-off-by: Muhammad Bilal <m.bilal@emumba.com>
In fslmc_process_mcp(), we allocate memory for 'dev_name' but not
released before return in secondary process. And it is not used
since commit a69f793002 ("bus/fslmc: support multi VFIO group"),
so it can be removed.
Fixes: e55d0494ab ("bus/fslmc: support secondary process")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enabled set link status API to start/stop phy
device from application.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch changes the qbman I/O function names as they are
only reading from cinh register, but writing to cena registers.
This gives way to add functions which purely work in cinh mode
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds support for portal migration by disabling stashing
for the portals which is used in the non-affined threads, or on
threads affined to multiple cores
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch reworks the portal allocation which was previously
being done on per lcore basis to a per thread basis.
Now user can also create its own threads and use DPAA2 portals
for packet I/O.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The function pci_map_resource() returns MAP_FAILED in case of error.
When replacing the call to mmap() by rte_mem_map(),
the error code became NULL, breaking the API.
This function is probably not used outside of DPDK,
but it is still a problem for two reasons:
- the deprecation process was not followed
- the Linux function pci_vfio_mmap_bar() is broken for i40e
The error code is reverted to the Unix value MAP_FAILED.
Windows needs to define this special value (-1 as in Unix).
After proper deprecation process, the API could be changed again
if really needed.
Because of the switch from mmap() to rte_mem_map(),
another part of the API was changed: "int additional_flags"
are defined as "additional flags for the mapping range"
without mentioning it was directly used in mmap().
Currently it is directly used in rte_mem_map(),
that's why the values rte_map_flags must be mapped (sic) on the mmap ones
in case of Unix OS.
These are side effects of a badly defined API using Unix values.
Bugzilla ID: 503
Fixes: 2fd3567e54 ("pci: use OS generic memory mapping functions")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Now that all libraries have a single version, we can drop the empty
stable blocks that had been added when moving symbols from stable to
internal ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
Uses SetupAPI.h functions to scan PCI tree.
Uses DEVPKEY_Device_Numa_Node to get the PCI NUMA node.
Uses SPDRP_BUSNUMBER and SPDRP_BUSNUMBER to get the BDF.
scanning currently supports types RTE_KDRV_NONE.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Added <sys/types.h> in rte_pci header file
to include off_t type since it is missing for Windows.
Define the implementation of the Linux function rte_pci_get_sysfs_path
in pci_common.c for Linux OS only as it is unneeded for other OSs
and to avoid the warning on deprecated call to getenv() on Windows:
"warning: 'getenv' is deprecated: This function or variable may be unsafe.
Consider using _dupenv_s instead."
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Changing all of PCIs Unix memory mapping to the
new memory allocation API wrapper.
Change all of PCI mapping function usage in
bus/pci to support the new API.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
To fix CVE-2020-12888, the linux vfio-pci module will invalidate mmaps
and block MMIO access on disabled memory, it will send a SIGBUS to the
application:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=abafbc551fdd
When the application opens the vfio PCI device, the vfio-pci module will
enable the bus memory space through PCI read/write access. According to
the PCIe specification, the 'Memory Space Enable' is always zero for VF:
Table 9-13 Command Register Changes
Bit Location | PF and VF Register Differences | PF | VF
| From Base | Attributes | Attributes
-------------+--------------------------------+------------+-----------
| Memory Space Enable - Does not | |
| apply to VFs. Must be hardwired| Base | 0b
1 | to 0b for VFs. VF Memory Space | |
| is controlled by the VF MSE bit| |
| in the VF Control register. | |
-------------+--------------------------------+------------+-----------
Afterwards the vfio-pci will initialize its own virtual PCI config space
data ('vconfig') by reading the VF's physical PCI config space, then the
'Memory Space Enable' bit in vconfig will always be 0b value. This will
make the vfio-pci treat the BAR memory space as disabled, and the SIGBUS
will be triggered if access these BARs.
By investigation, the VF PCI device *passthrough* into the Guest OS by
QEMU has the 'Memory Space Enable' with 1b value. That's because every
PCI driver will start to enable the memory space, and this action will
be hooked by vfio-pci virtual PCI read/write to set the 'Memory Space
Enable' in vconfig space to 1b. So VF runs in guest OS has 'Mem+', but
VF runs in host OS has 'Mem-'.
Align with PCI working mode in Guest/QEMU/Host, in DPDK, enable the PCI
bus memory space explicitly to avoid access on disabled memory.
Fixes: 33604c3135 ("vfio: refactor PCI BAR mapping")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Thierry Martin <thierry.martin.public@gmail.com>
vmbus_map_addr is used as the next start virtual address for mapping ring
buffer. However it's updated based on ring_buf, which is a pointer to an
address on the stack. The next ring buffer may be mapped to an unexpected
address.
Fix this by calculating vmbus_map_addr based on returned virtual address.
Fixes: 3f9277031a ("bus/vmbus: fix check for mmap failure")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
In order to optimize the PCI management, RTE_KDRV_NONE based
device driver probing removed by not adding them to list in
the scan phase.
The legacy virtio is the only consumer of RTE_KDRV_NONE based device
driver probe scheme. The legacy virtio support will be available
through the existing VFIO/UIO based kernel driver scheme.
This patch also removes the deprecation notice for the same.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
There is no point in having non-static (and non-extern) inline
functions.
Also this breaks the build for the ICC [1] because of the 'internal'
symbol check.
When function is 'inline' ICC is ignoring 'section' attribute and not
putting function to 'internal' section which breaks 'check-symbols.sh'
script with below error.
[1]
qbman_swp_dqrr_next is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_dqrr_next
qbman_swp_enqueue_multiple is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple
qbman_swp_enqueue_multiple_desc is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple_desc
qbman_swp_enqueue_multiple_fd is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_enqueue_multiple_fd
qbman_swp_pull is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_pull
qbman_swp_release is not flagged as internal
but is listed in version map
Please add __rte_internal to the definition of qbman_swp_release
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
rte_dpaa2_memsegs is not being used by any other library
or even within bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch changes the export of fman port config
as function call instead of direct variable access.
This is in control path, so it will not impact perf.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This is to reduce the number of variables getting exposed
from the dpaa bus. They are not required to be in bus.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
qman caam and pool portal ids are only used in control
path. This patch changes their inter library access to
function call instead of direct shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which are not to be exported.
rte_dpaa_mem_ptov - static inline in the headerfile
fman_ccsr_map_fd - local shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which were not used
anywhere else i.e. rte_fslmc_vfio_dmamap & dpaa2_get_qbman_swp
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Correct the qman_fq_desc as per the HW defined size
Fixes: 6fef517e17 ("bus/fslmc: add qman HW fq query count API")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When IOVA is physical address do not prefetch the annotation
of the next frame, as there is a cost involved there to convert
the physical address to virtual address.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The check for event ring being empty needs a barrier
to avoid any over aggressive optimization.
This is same barrier as Linux kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rte_bus_scan API scans all the available PCI devices irrespective of white
or black listing parameters then further devices are probed based on white
or black listing parameters. So unnecessary CPU cycles are wasted during
rte_pci_scan.
For Octeontx2 platform with core frequency 2.4 Ghz, rte_bus_scan consumes
around 26ms to scan around 90 PCI devices but all may not be used by the
application. So for the application which uses 2 NICs, rte_bus_scan
consumes few microseconds and rest time is saved with this patch.
Patch restricts devices to be scanned as per below mentioned conditions:
- All devices will be scanned if no parameters are passed.
- Only white listed devices will be scanned if white list is available.
- All devices, except black listed, will be scanned if black list is
available.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Gaetan Rivet <grive@u256.net>
rte_pci_probe() is private to the PCI bus.
Clean the remaining references in the documentation and comments.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Some machines may have a lot of PCI devices and all of them are
not bound to DPDK. In such case the logs from EAL creates a lot of
clutter on boot-up, typically one needs to scroll the screen to
find other issues in boot-up.
This patch changes the following to reduce the clutter in
the default boot-up logs.
- Change the log-level of PCI probes to `debug`
- Introduce new driver probe as `info` log-level for the successful probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
For PCI devices presented through igb_uio, pcidev->mem_resource[] is
not populated when the device is initialized for secondary process.
Initialize pcidev->mem_resource[] with pci-bar mapped addresses.
Fixes: eee16c964c ("pci: support multiple PCI regions per device")
Cc: stable@dpdk.org
Signed-off-by: Vijaya Mohan Guvva <vijay1054@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
All recent POWER systems, Power 8 and 9 specifically, support an IOMMU
(it can't be disabled). The functionality of the IOMMU is different
depending on whether it's running on a bare metal PowerNV system or in
a virtual environment (PowerVM LPAR or KVM/QEMU). DPDK currently
supports the IOMMU found on PowerNV platforms, sPAPRv2, so IOVA=VA
mode can be enabled when the correct platform is detected.
The POWER IOMMU type can't be detected through mechanisms such as
parsing files in the /sys hierarchy like x86_64 systems so the
/proc/cpuinfo file is parsed to determine whether Linux is running
on bare metal (i.e. PowerNV) or in a virtual environment (KVM/QEMU).
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
The transmit need signal function can avoid an unnecessary
dereference by passing the right pointer. This also makes
code better match FreeBSD driver.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
As per the comments in this code section, since there is a matching device,
it is now its responsibility to manage the devargs we've just inserted.
But the matching device ptr's devargs is still uninitialized or not pointing
to the newest dev_args that were passed as a parameter to local_dev_probe().
This is needed particularly in the case when *probe is called again* on an
already probed device as part of adding a representor port to OVS-DPDK.
Fixes: 7e8b266501 ("eal: fix hotplug add / remove")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Gaetan Rivet <grive@u256.net>
This is a helper function in case components would like to do more work
than just logging a message based on log level, like for example
collecting some stats if the log type is DEBUG etc..
A few existing relevant usage converted to this new API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The include file rte_debug.h is pulled into x86 builds through the
following callchain:
lib/librte_eal/common/include/generic/rte_cycles.h:17,
lib/librte_eal/common/include/arch/x86/rte_cycles.h:13,
lib/librte_eal/common/include/arch/x86/rte_spinlock.h:18,
lib/librte_eal/common/include/arch/x86/rte_rwlock.h:13,
The PPC specific version of the same callchain does not include
rte_debug.h. Add rte_debug.h back into the C files that require it.
Fixes: 0dcba52562 ("pci: remove unneeded includes in public header file")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Wilder <dwilder@us.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The rte_pci.h file includes more header files than are actually needed,
which means that all users of it also include those headers. This patch
removes the unneeded headers - adding them elsewhere where other components
were requiring them but not including them directly.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
DPAA sec driver is using virtual to physical address
translation in its data path and driver is using
dpaax_iova_table_update() API in every address translation
which is very costly.
This patch moves dpaax_iova_table_update() calling to rte_dpaa_mem_ptov(),
only if it fails to found translation from DPAAX table.
Fixes: 12e5842945 ("crypto/dpaa_sec: fix IOVA table")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Contrary to the -c/-l options, where a logical core runs on the same
physical core in a 1:1 fashion (example: lcore 0 runs on core 0, lcore
16 runs on core 16), the --lcores option makes it possible to select the
physical cores on which runs a logical core.
However the current parsing code still limits the cpuset to the
[0, RTE_MAX_LCORE] range.
Example, before the patch, on a 24 cores system with RTE_MAX_LCORE == 16:
$ ./master/app/testpmd --no-huge --no-pci -m 512 --log-level *:debug \
--lcores 0@16,1@17 -- -i --total-num-mbufs 2048
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 8 on socket 0
EAL: Detected lcore 8 as core 9 on socket 0
EAL: Detected lcore 9 as core 10 on socket 0
EAL: Detected lcore 10 as core 11 on socket 0
EAL: Detected lcore 11 as core 12 on socket 0
EAL: Detected lcore 12 as core 13 on socket 0
EAL: Detected lcore 13 as core 14 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 1 on socket 0
EAL: Skipped lcore 16 as core 2 on socket 0
EAL: Skipped lcore 17 as core 3 on socket 0
EAL: Skipped lcore 18 as core 4 on socket 0
EAL: Skipped lcore 19 as core 5 on socket 0
EAL: Skipped lcore 20 as core 6 on socket 0
EAL: Skipped lcore 21 as core 8 on socket 0
EAL: Skipped lcore 22 as core 9 on socket 0
EAL: Skipped lcore 23 as core 10 on socket 0
EAL: Skipped lcore 24 as core 11 on socket 0
EAL: Skipped lcore 25 as core 12 on socket 0
EAL: Skipped lcore 26 as core 13 on socket 0
EAL: Skipped lcore 27 as core 14 on socket 0
EAL: Support maximum 16 logical core(s) by configuration.
EAL: Detected 16 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid parameter for --lcores
We can remove this limitation by using a cpuset_t (which is a more
natural type since this is what gets passed to pthread_setaffinity*
in the end).
After the patch:
$ ./master/app/testpmd --no-huge --no-pci -m 512 --log-level *:debug \
--lcores 0@16,1@17 -- -i --total-num-mbufs 2048
[...]
EAL: Master lcore 0 is ready (tid=7f94217bbc00;cpuset=[16])
EAL: lcore 1 is ready (tid=7f941f491700;cpuset=[17])
Signed-off-by: David Marchand <david.marchand@redhat.com>
There are two definitions conflicting each other, for more
details, refer to [1].
include/rte_atomic_64.h:19: error: "dmb" redefined [-Werror]
drivers/bus/fslmc/mc/fsl_mc_sys.h:36: note: this is the location of the
previous definition
#define dmb() {__asm__ __volatile__("" : : : "memory"); }
The fix is to reuse the EAL definition to avoid conflicts.
[1] http://inbox.dpdk.org/users/VI1PR08MB537631AB25F41B8880DCCA988FDF0@
VI1PR08MB5376.eurprd08.prod.outlook.com/T/#u
Fixes: 3af733ba8d ("bus/fslmc: introduce MC object functions")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When probing, a bus is responsible for filling the driver field to
indicate the device is bound.
Let's clear this field when detaching to keep a consistent behavior.
This is not a fix per se, since the device is freed when detaching.
But at least clearing the field has been added to remind that the
driver field has a meaning for the EAL.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, the next address picked by PCI mapping infrastructure
may be page-unaligned due to BAR length being smaller than page size.
This leads to a situation where the requested map address is invalid,
resulting in mmap() call returning an arbitrary address,
which will later interfere with device BAR mapping in secondary processes.
Fix it by always aligning the next requested address on page boundary.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaofeng Deng <dengxiaofeng@huawei.com>
Signed-off-by: Wangyu (Eric) <seven.wangyu@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
RBP or route by ports can help in translating the DMA
address over the PCI. Thus adding the RBP support with
long and short formats
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA SEC shall be able to work independent of DPAA ETH
driver.
This patch moves qbman init to bus, so that any driver
can use them even when no eth resources are present
or none of the eth devices are probed.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In the packet transmit, if the QBMAN is not able to process the
packets, the Tx function loops infinitely to send the packet out.
This patch changes the logic retry for some time (count) and then
return.
Fixes: cd9935cec8 ("net/dpaa2: enable Rx and Tx operations")
Fixes: 16c4a3c46a ("bus/fslmc: add enqueue response read in qbman")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
1 issue caught by coverity (issue 344967).
Leaked_storage: Variable sep going out of scope leaks the
storage it points to.
When 'sep' is not null and sep_exist is 0, 'sep' is freed
before going out of scope of the function irrespective of
'addr' exists or not.
Coverity issue: 344967
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
When 32-bit application is built on 64-bit system it is possible that
the offset of the resource is outside of the 32-bit value.
The problem with the unsigned long is, that it is 32-bit and not 64-bit
when using armhf compiler. Although the system is returning u64 value,
we are losing it's value if it's higher than 32-bit in the conversion
process. It can further cause mmap to fail due to offset being 0 or to
map not intended memory region.
To make it more portable, the uint64_t value is now being used for
storing offset instead of unsigned long. The size of being 32-bit seems
to be fine as the 32-bit application won't be able to access bigger
memory and it is further converted to size_t anyway. But for better
readability and to be consistent, it's type was changed to size_t as
well.
Fixes: 0205f87355 ("vfio: fix overflow of BAR region offset and size")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
'qman_version' global variable is defined in a header file which was
causing multiple definitions of the variable, fixed it by moving it to
the .c file.
Issue has been detected by '-fno-common' gcc flag.
Fixes: 293c0ca94c ("bus/fslmc: support memory backed portals with QBMAN 5.0")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
On x86, calling inb/outb special instructions (used in UIO ioport
read/write parts) is only possible if the right IO permissions has been
granted.
The only user of this API (the net/virtio pmd) checks this
unconditionnaly but this should be hidden by the rte_pci_ioport API
itself and only checked when the device is bound to a UIO driver.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The makefile in drivers/bus/pci specified rte_ethdev as a dependency for
the library. However there are no actual symbols from librte_ethdev used
in librte_bus_pci.
Including librte_ethdev as a dependency only becomes a problem in some
niche cases like when attempting to build the rte_bus_pci library as a
shared object without building the rte_ethdev library.
I specifically ran into this when trying to build the DPDK included as
an SPDK submodule on a FreeBSD machine. I figure that since there are no
real dependencies between the two, we should enable building
librte_bus_pci without librte_ethdev.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Seth Howell <seth.howell@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 support VFIO device passthrough in VM.
However in this case, each device is associated with different vfio group.
This code required different container id for each group.
On using the same container fd the second time,
ioctl calls are returning error.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DMA mapping is a property of primary process - SMMU population done
once by primary doesn't need to be populated again in secondary
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
The address translation support for PA->VA is required only in
case of PA mode operation of DPDK. This was causing warning to
be reported on running any DPAA2 application in VA mode:
Add: Incorrect entry for PA->VA Table(xxxxxxxxxx)
Add: Lowest address: xxxxxxxxxxxx
This was caused by call to update the DPAAX table when VA mode
was enabled, in which case the VA==IOVA address.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX confirmation mode provides dedicated confirmation
queues for transmitted packets. These queues are used
by software to get the status and release
transmitted packets buffers.
By default TX confirmation mode is kept disabled.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The existing taildrop was based on queue data size.
This patch replaces it with frame count bases using
CGR methods of DPAA2 device.
The number of CGRs are limited. So,
- use per queue CGR based tail drop for as many as CGR
available.
- Remaining queues shall use the legacy byte based tail drop
Number of CGRs can be controlled by dpl file during dpni_create.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for dpaa eth driver
interrupt enable and disable callback functions.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds interrupt handler support for
the ethernet devices which are configured with
a dedicated portal for packet Rx
(i.e. for FQ's in push mode).
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The decoupling of FQ portal allocation is required as a
pre-requisite to support Rx interrupts as we need to have
event FD's at portal allocation i.e. before the
initialization of the Frame Queues.
This change will help us get the event fd once the portals
have been allocated for static FQ's.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Thread affinity is already taken care by DPDK. Remove them from bus.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The black list of dpaa_sec devices fails.
EAL: failed to parse device "dpaa:dpaa_sec-1"
This patch address following issues:
- bus usages dpaa-sec while the driver usage dpaa_sec
- bus usages numbers from 0 to MAX_SEC - while driver
probe usages sec number form max-fman_device +1
Fixes: 6e0752205b ("bus/dpaa: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
dpaa_sec hw queues can be attached to a hw dpaa event
device and the application can configure the event
crypto adapter to access the dpaa_sec packets using
hardware events.
This patch defines APIs which can be used by the
dpaa event device to attach/detach dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Just open the sysfs file and handle failure, rather than using access().
This eliminates Coverity warnings about TOCTOU
"time of check versus time of use"; although for this sysfs file that is
not really an issue anyway.
Coverity issue: 347276
Fixes: 54a328f552 ("bus/pci: forbid IOVA mode if IOMMU address width too small")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When using RTE_PKTMBUF_HEADROOM as 0, dpaa driver throws compilation error
error "Annotation requirement is more than RTE_PKTMBUF_HEADROOM"
This patch change it into run-time check.
Bugzilla ID: 335
Fixes: beb2a7865d ("bus/fslmc: define hardware annotation area size")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IOMMU capabilities won't change and must be checked even if no PCI device
seem to be supported yet when EAL initialised.
This is to accommodate with SPDK that registers its drivers after
rte_eal_init(), especially on PPC platform where the IOMMU does not
support VA.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Takeshi Yoshimura <tyos@jp.ibm.com>
This macro is unused after a previous fix.
Fixes: fe822eb8c5 ("bus/pci: use IOVA DMA mask check when setting IOVA mode")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch resets frc and ctrl in sg tx fd to avoid corruption.
Fixes: 774e9ea919 ("net/dpaa2: add support for multi seg buffers")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This reverts commit 89aac60e0b.
"vfio: fix interrupts race condition"
The above mentioned commit moves the interrupt's eventfd setup
to probe time but only enables one interrupt for all types of
interrupt handles i.e VFIO_MSI, VFIO_LEGACY, VFIO_MSIX, UIO.
It works fine with default case but breaks below cases specifically
for MSIX based interrupt handles.
* Applications like l3fwd-power that request rxq interrupts
while ethdev setup.
* Drivers that need > 1 MSIx interrupts to be configured for
functionality to work.
VFIO PCI for MSIx expects all the possible vectors to be setup up
when using VFIO_IRQ_SET_ACTION_TRIGGER so that they can be
allocated from kernel pci subsystem. Only way to increase the number
of vectors later is first free all by using VFIO_IRQ_SET_DATA_NONE
with action trigger and then enable new vector count.
Above commit changes the behavior of rte_intr_[enable|disable] to
only mask and unmask unlike earlier behavior and thereby
breaking above two scenarios.
Fixes: 89aac60e0b ("vfio: fix interrupts race condition")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This reverts commit 0cb86518db.
The PCI bus now reports DC when faced with a device bound to an unknown
driver and, in such a case, the IOVA mode is selected against physical
address availability.
As a consequence, there is no reason for this special case for Mellanox
drivers.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
fslmc_vfio.c:387:36: note: format string is defined here
DPAA2_BUS_DEBUG("VFIO dmamap 0x%llx:0x%llx, size 0x%llx\n",
format ‘%llx’ expects argument of type ‘long long unsigned int’
argument 6 has type ‘__u64 {aka long unsigned int}’
Fixes: 2b5fa25708 ("mempool/dpaa2: map external memory with VFIO")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa2 devices.
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch removes the unnecessary err prints when using
non-dpaa devices.
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When initializing EAL with "-w 0:0.0", this error is blocking:
munmap_chunk(): invalid pointer
ElectricFence reports this root cause:
free(7fffeec25a11): address not from malloc()
Fixes: e67a61614d ("bus/fslmc: support device iteration")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Thomas Monjalon <thomas@monjalon.net>
LS1088 platform CENA operation are causing issues
at high load. CINH (cache inhibited) mode is working
fine with minor performance impact.
This patch enables CINH mode selectively on LS1088 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds following:
1. 'g_container' variable name is not right way to represent the
FSLMC container. Renaming it to fslmc_container.
2. dynamic selection of IOMMU mode based on run environment
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Recent (18.11+), devargs structure was changed and so was DPDK port
usage in applications like OVS. Applications are now allowed to
plug/unplug ports (eth) using APIs (hotplug) based on device
arguments.
This patch enables the plug/unplug function (which are dummy for
FSLMC) and the iterator function for rte_dev_probe() and similar
API support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Populating the eventfd in rte_intr_enable in each request to vfio
triggers a reconfiguration of the interrupt handler on the kernel side.
The problem is that rte_intr_enable is often used to re-enable masked
interrupts from drivers interrupt handlers.
This reconfiguration leaves a window during which a device could send
an interrupt and then the kernel logs this (unsolicited from the kernel
point of view) interrupt:
[158764.159833] do_IRQ: 9.34 No irq handler for vector
VFIO api makes it possible to set the fd at setup time.
Make use of this and then we only need to ask for masking/unmasking
legacy interrupts and we have nothing to do for MSI/MSIX.
"rxtx" interrupts are left untouched but are most likely subject to the
same issue.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1654824
Fixes: 5c782b3928 ("vfio: interrupts")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
The APIs in the rte_bus_vdev.h file were not part of the API
documentation. I added this header file to the doxygen config file with
the name vdev.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
1. need to use the bpool with rte_malloc instead of rte_free
2. Option to give portal to the secondary process thread.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Akhil Goyal <akhil.goyal@nxp.com>
Parse and find_device have specific function - former is for parsing a
string passed as argument, whereas the later is for iterating over all
the devices in the bus and calling a callback/handler. They have been
corrected with their right operations to support hotplugging/devargs
plug/unplug calls.
Support for plug/unplug too has been added.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, the memory hotplug is locked automatically by all
memory-related _walk() functions, but sometimes locking the
memory subsystem outside of them is needed. There is no
public API to do that, so it creates a dependency on shared
memory config to be public. Fix this by introducing a new
API to lock/unlock the memory hotplug subsystem.
Create a new common file for all things mem config, and a
new API namespace rte_mcfg_*, and search-and-replace all
usages of the locks with the new API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
When selecting the preferred IOVA mode of the pci bus, the current
heuristic ("are devices bound?", "are devices bound to UIO?", "are pmd
drivers supporting IOVA as VA?" etc..) should honor the device
white/blacklist so that an unwanted device does not impact the decision.
There is no reason to consider a device which has no driver available.
This applies to all OS, so implements this in common code then call a
OS specific callback.
On Linux side:
- the VFIO special considerations should be evaluated only if VFIO
support is built,
- there is no strong requirement on using VA rather than PA if a driver
supports VA, so defaulting to DC in such a case.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The vmbus scan code can just skip non-network devices.
More importantly, this fixes the bug where some vmbus devices
don't have all the attributes (like monitor_id) and a single
failure would cause the scan to break the loop.
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Using access followed by open causes a static analysis warning
about Time of check versus Time of use. Also, access() and
open() have different UID permission checks.
This is not a serious problem; but easy to fix by using errno instead.
Coverity issue: 300870
Fixes: 4a928ef9f6 ("bus/pci: enable write combining during mapping")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
For primary processes, it is OK to not have IPC because
there may not be any secondary processes in the first place,
and there are valid use cases that disable IPC support, so
all primary process usages are fixed up to ignore IPC
failures.
For secondary processes, IPC will be crucial, so leave all
of the error handling as is.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When checking RTE_PCI_DRV_IOVA_AS_VA flag to determine IOVA mode,
pci_one_device_has_iova_va() returns true only if kernel driver of the
device is vfio. However, Mellanox mlx4/5 PMD doesn't need to be detached
from kernel driver and attached to VFIO/UIO. Control path still goes
through the existing kernel driver, which is mlx4_core/mlx5_core. In order
to make RTE_PCI_DRV_IOVA_AS_VA effective for mlx4/mlx5 PMD, a new kernel
driver type has to be introduced.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
The lcore_config structure will be hidden in future release.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Printing a null pointer with %s is flagged as a warning by GCC 9, and
should not be done. Replace the %s with the word "null" itself.
Fixes: 828d51d8fc ("bus/fslmc: refactor scan and probe functions")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If secondary process attempt to mmap the resource resulted in
the wrong address, then it would leave behind the bad mmap.
Coverity issue: 337675, 337664
Fixes: 2a28a502c6 ("bus/vmbus: map ring in secondary process")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
In many scenarios, AFU is needed searched by name, this
function add the feature.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
AFU can be implemented into many different acceleration
devices, these devices need shared data to store private
information when they are handled by users.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removes some unused firmware code which was added in last bump
of the firmware version. No current features uses these APIs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
- fle pool allocations should be done for each process.
- cryptodev->data is shared across muliple processes but
cryptodev itself is allocated for each process. So any
information which needs to be shared between processes,
should be kept in cryptodev->data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This fixes the following compile error with musl libc:
drivers/bus/fslmc/qbman/include/compat.h:41:10: error:
'stdout' undeclared (first use in this function)
fflush(stdout); \
^~~~~~
Fixes: 531b17a780 ("bus/fslmc: add QBMAN driver to bus")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes following build error with musl libc:
In file included from drivers/bus/fslmc/qbman/qbman_debug.c:6:
drivers/bus/fslmc/qbman/include/compat.h:21:10: fatal error:
error.h: No such file or directory
#include <error.h>
^~~~~~~~~
Apparently it is not used anywere in qbman so simply remove the include.
Fixes: 531b17a780 ("bus/fslmc: add QBMAN driver to bus")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
The DPDK APIs expose 3 different modes to work with memory used for DMA:
1. Use the DPDK owned memory (backed by the DPDK provided hugepages).
This memory is allocated by the DPDK libraries, included in the DPDK
memory system (memseg lists) and automatically DMA mapped by the DPDK
layers.
2. Use memory allocated by the user and register to the DPDK memory
systems. Upon registration of memory, the DPDK layers will DMA map it
to all needed devices. After registration, allocation of this memory
will be done with rte_*malloc APIs.
3. Use memory allocated by the user and not registered to the DPDK memory
system. This is for users who wants to have tight control on this
memory (e.g. avoid the rte_malloc header).
The user should create a memory, register it through rte_extmem_register
API, and call DMA map function in order to register such memory to
the different devices.
The scope of the patch focus on #3 above.
Currently the only way to map external memory is through VFIO
(rte_vfio_dma_map). While VFIO is common, there are other vendors
which use different ways to map memory (e.g. Mellanox and NXP).
The work in this patch moves the DMA mapping to vendor agnostic APIs.
Device level DMA map and unmap APIs were added. Implementation of those
APIs was done currently only for PCI devices.
For PCI bus devices, the pci driver can expose its own map and unmap
functions to be used for the mapping. In case the driver doesn't provide
any, the memory will be mapped, if possible, to IOMMU through VFIO APIs.
Application usage with those APIs is quite simple:
* allocate memory
* call rte_extmem_register on the memory chunk.
* take a device, and query its rte_device.
* call the device specific mapping function for this device.
Future work will deprecate the rte_vfio_dma_map and rte_vfio_dma_unmap
APIs, leaving the rte device APIs as the preferred option for the user.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The fman device list need to be accessed across processes.
The hw device structures should be allocated with rte_calloc
instead of calloc. The rte_calloc is not available at the
time of bus scan, so better prepare the device list at probe.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A reference to qman_fq_lookup_table need to be saved in each
fq, so that it is retrieved while in running secondary process.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Current value of 'fmbm_rfsdm' register (0x010CE3F0) doesn't include
the bit to drop colored (red) packets. New value (0x010EE3F0) fixes
this.
Check with 'fmbm_rffc' register of fm_port_bmi_regs.
Fixes: 6d6b4f49a1 ("bus/dpaa: add FMAN hardware operations")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The fslmc bus code was duplicating the device name and
doing extra initialization. The code can be simplified
to just use the device name directly.
Compile tested only; do not have this hardware.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When fslmc is built as part of a general distribution, the
bus code will log errors when other devices are present.
This could confuse users it is not an error.
Fixes: 50245be05d ("bus/fslmc: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>