Add a missing space must before the first item of the list to display it
correctly in the User Guide.
Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Fixes: b79e4c00af0e ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Andrea Grandi <andrea.grandi@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Replacing atomics in the QAT driver with simple 16-bit integers for
number of inflight packets.
This adds a new limitation to the QAT driver: each queue pair is
now explicitly single-threaded.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Older generations of QuickAssist hardware
may not support all algorithms supported by newer
generations. When sessions were specific to the device
this only needed to be handled on session creation.
With device-agnostic sessions, a session created
for a newer device may get routed to an older device which
can't support it.
This patch adds an enum to define QAT device generations
and uses this to detect and handle the above case on the
data path.
It also renames the capabilities structures and #defines
to match the generation names and adds the generation
to the device table in the documentation.
Fixes: b3bbd9e5f265 ("cryptodev: support device independent sessions")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For KASUMI F9 algorithm, COUNT, FRESH and DIRECTION
input values need to be contiguous with
the message, as described in the KASUMI and QAT PMD
documentation.
Before, the COUNT and FRESH values were set
as part of the AAD (now IV), but always set before
the beginning of the message.
Since now the IV is set after the crypto operation,
it is not possible to have these values in the
expected location.
Therefore, as these are required to be contiguous,
cryptodev API will expect these them to be passed
as a single buffer, already constructed, so
authentication IV parameters not needed anymore.
Fixes: 681f540da52b ("cryptodev: do not use AAD in wireless algorithms")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For KASUMI, SNOW3G and ZUC algorithms, offsets and lengths
of the data to cipher or authenticate is provided in bits,
but QAT does not support non-byte aligned values,
although only KASUMI and SNOW3G were mentioned.
Fixes: d9b7d5bbc845 ("crypto/qat: add ZUC EEA3/EIA3 capability")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
QAT supports authentication only operations,
for any authentication algorithm (such as SHA1-HMAC),
as long as it is supported by QAT, so it means
that it is not necessary to create a chained operation
in order to use these algorithms.
Fixes: 1703e94ac5ce ("qat: add driver for QuickAssist devices")
CC: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Now that all the structures/functions for AEAD algorithms
are in place, migrate the two supported algorithms
AES-GCM and AES-CCM to these, instead of using
cipher and authentication parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Restructure QAT PMD instructions and add a device table to
minimise duplication for each device and make it easier to add devices.
Fix some device name typos and poor formatting.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Extended functional AES-CBC and AES-CTR cipher-only
tests to run on QAT PMD.
Added AES_CBC cipher-only performance tests on QAT PMD.
No driver changes, but as now tested, QAT documentation
is updated to remove constraint.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
3DES support added to QuickAssist PMD with CTR and CBC mode.
Both cipher-only and chained with HMAC_SHAx.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adding the support to bind/unbind crypto devices with
dpdk-devbind.py script, as now it is not restricted
to network devices anymore.
Signed-off-by: Eoin Breen <eoin.breen@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Added possibility for AES to work in counter mode
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds out-of-place operations to qat symmetric crypto PMD,
i.e. the result of the operation can be written to the destination buffer
instead of overwriting the source buffer as done in "in-place" operation.
Both buffers can be of different sizes.
Previously the qat PMD assumed that m_src and m_dst in rte_crypto_sym_op
were identical.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
AES GCM on the cryptodev API was giving invalid results
in some cases, due to an incorrect IV setting.
Added AES GCM in the QAT supported algorithms,
as encryption/decryption is fully functional.
Fixes: 1703e94ac5ce ("qat: add driver for QuickAssist devices")
Signed-off-by: John Griffin <john.griffin@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Wireless algorithms like Snow3G needs input in bits.
In this patch, changes have been made to incorporate this requirement
in both QAT and SW PMD.
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixing the version of the kernel required in the QAT documentation.
Signed-off-by: John Griffin <john.griffin@intel.com>
Acked by: Declan Doherty <declan.doherty@intel.com>
This patch adds a PMD for the Intel Quick Assist Technology DH895xxC
hardware accelerator.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details
This patch supports a limited subset of QAT device functionality,
currently supporting chaining of cipher and hash operations for the
following algorithmsd:
Cipher algorithms:
- RTE_CRYPTO_CIPHER_AES_CBC (with 128-bit, 192-bit and 256-bit keys supported)
Hash algorithms:
- RTE_CRYPTO_AUTH_SHA1_HMAC
- RTE_CRYPTO_AUTH_SHA256_HMAC
- RTE_CRYPTO_AUTH_SHA512_HMAC
- RTE_CRYPTO_AUTH_AES_XCBC_MAC
Some limitation on this patchset which shall be contributed in a
subsequent release:
- Chained mbufs are not supported.
- Hash only is not supported.
- Cipher only is not supported.
- Only in-place is currently supported (destination address is
the same as source address).
- Only supports session-oriented API implementation (session-less
APIs are not supported).
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
