We don't need to depend on rte_eth_dev->pci_dev to differentiate between
the virtio_user and the virtio_pci case. Instead we can use the private
virtio_hw struct to get that information.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This adds a helper to get the rte_intr_handle from the virtio_hw. This is
safe to do since the usage of the helper is guarded by RTE_ETH_DEV_INTR_LSC
which is only set if we found a PCI device during initialization.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is overwritten in rte_eth_dev_info_get().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Use existing information about pci and interrupt handle to minimize
the number of places that assume eth_dev contains pci_device
information.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Since later changes will change where PCI information is,
localize mapping in one macro.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Create one macro for where PCI device information is extracted
from ethernet device. Makes later changes easier to review, and test.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
The info in rte_device about driver is immutable and
shouldn't change.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Both register/unregister and enable/disable don't necessarily require the
rte_intr_handle to be modifiable. Therefore lets constify it.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This macro is based on Jan Viktorin's original patch but also checks the
type of the passed pointer against the type of the member.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
[jblunck@infradead.org: add type checking and __extension__]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
A missing include causes the following compilation errors:
error: use of undeclared identifier 'AF_INET'
error: use of undeclared identifier 'AF_INET6'
Fixes: ef6e38550f ("app/testpmd: add items ipv4/ipv6 to flow command")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Document syntax, interaction with rte_flow and provide usage examples.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
- QUEUE: assign packets to a given queue index.
- DUP: duplicate packets to a given queue index.
- RSS: spread packets among several queues.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- MARK: attach 32 bit value to packets.
- FLAG: flag packets.
- DROP: drop packets.
- COUNT: enable counters for a rule.
- PF: redirect packets to physical device function.
- VF: redirect packets to virtual device function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match a few properties of common L4[.5] protocol
headers:
- ICMP: type and code.
- UDP: source and destination ports.
- TCP: source and destination ports.
- SCTP: source and destination ports.
- VXLAN: network identifier.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match basic fields from IPv4 and IPv6 headers (source
and destination addresses only).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
These pattern items match basic Ethernet headers (source, destination and
type) and related 802.1Q/ad VLAN headers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Matches arbitrary byte strings with properties:
- relative: look for pattern after the previous item.
- search: search pattern from offset (see also limit).
- offset: absolute or relative offset for pattern.
- limit: search area limit for start of pattern.
- length: pattern length.
- pattern: byte string to look for.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- PF: match packets addressed to the physical function.
- VF: match packets addressed to a virtual function ID.
- PORT: device-specific physical port index to use.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This pattern item matches any protocol in place of the current layer and
has two properties:
- min: minimum number of layers covered (0 or more).
- max: maximum number of layers covered (0 means infinity).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Several rte_flow structures expose bit-fields that cannot be set in a
generic fashion at byte level. Add bit-mask support to handle them.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Generating bit-masks from prefix lengths is often more convenient than
providing them entirely (e.g. to define IPv4 and IPv6 subnets).
This commit adds the "prefix" operator that assigns generated bit-masks to
any pattern item specification field.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add parser code to fully set individual fields of pattern item
specification structures, using the following operators:
- fix: sets field and applies full bit-mask for perfect matching.
- spec: sets field without modifying its bit-mask.
- last: sets upper value of the spec => last range.
- mask: sets bit-mask affecting both spec and last from arbitrary value.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow query {port_id} {rule_id} {action}
Query a specific action of an existing flow rule.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow (validate|create) {port_id}
[group {group_id}] [priority {level}] [ingress] [egress]
pattern {item} [/ {item} [...]] / end
actions {action} [/ {action} [...]] / end
Either check the validity of a flow rule or create it. Any number of
pattern items and actions can be provided in any order. Completion is
available for convenience.
This commit only adds support for the most basic item and action types,
namely:
- END: terminates pattern items and actions lists.
- VOID: item/action filler, no operation.
- INVERT: inverted pattern matching, process packets that do not match.
- PASSTHRU: action that leaves packets up for additional processing by
subsequent flow rules.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow destroy {port_id} rule {rule_id} [...]
Destroy a given set of flow rules associated with a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow flush {port_id}
Destroy all flow rules on a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow list {port_id} [group {group_id}] [...]
List configured flow rules on a port. Output can optionally be limited to a
given set of group identifiers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Parse all integer types and handle conversion to network byte order in a
single function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Managing generic flow API functions from command line requires the use of
dynamic tokens for convenience as flow rules are not fixed and cannot be
defined statically.
This commit adds specific flexible parser code and object for a new "flow"
command in separate file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add basic management functions for the generic flow API (validate, create,
destroy, flush, query and list). Flow rule objects and properties are
arranged in lists associated with each port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This prevents sigbus errors on architectures that cannot handle unexpected
unaligned accesses to the output buffer.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Considering tokens must be hard-coded in a list part of the instruction
structure, context-dependent tokens cannot be expressed.
This commit adds support for building dynamic token lists through a
user-provided function, which is called when the static token list is empty
(a single NULL entry).
Because no structures are modified (existing fields are reused), this
commit has no impact on the current ABI.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
They are superseded by the generic flow API (rte_flow). Target release is
not defined yet.
Suggested-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This new API supersedes all the legacy filter types described in
rte_eth_ctrl.h. It is slightly higher level and as a result relies more on
PMDs to process and validate flow rules.
Benefits:
- A unified API is easier to program for, applications do not have to be
written for a specific filter type which may or may not be supported by
the underlying device.
- The behavior of a flow rule is the same regardless of the underlying
device, applications do not need to be aware of hardware quirks.
- Extensible by design, API/ABI breakage should rarely occur if at all.
- Documentation is self-standing, no need to look up elsewhere.
Existing filter types will be deprecated and removed in the near future.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- Grouped related items using empty lines
- Aligned arguments to same column
- All item comments that doesn't fit same line are placed blow the item
itself
- Moved some comments to same line if overall line < 100 chars
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts commit 5b7bb2bda5.
It is necessary to reconfigure all queues every time because configuration
can be changed.
For example, if we're reconfiguring bonding device with new memory pool,
already configured queues will still use the old one. And if the old
mempool be freed, application likely will panic in attempt to use
freed mempool.
This happens when we use the bonding device with OVS 2.6 while MTU
reconfiguration:
PANIC in rte_mempool_get_ops():
assert "(ops_index >= 0) && (ops_index < RTE_MEMPOOL_MAX_OPS_IDX)" failed
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
After a slave interface is removed from a bond group it still has the
configuration of the bond interface. Lets enforce that the slave interface
is reconfigured after removal by resetting it.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
If all queues are released lets also free up the dev->data->rx/tx_queues
to be able to properly reinitialize.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Lets clear the eth_dev->data when allocating a new rte_eth_dev so that
drivers only need to set non-zero values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
No device driver sets the unbind flag in current public code base.
Therefore it is good time to remove the unused dead code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some platform like octeontx may use pci and
vdev based combined device to represent a logical
dpdk functional device.In such case, postponing the
vdev initialization after pci device
initialization will provide the better view of
the pci device resources in the system in
vdev's probe function, and it allows better
functional subsystem registration in vdev probe
function.
As a bonus, This patch fixes a bond device
initialization use case.
example command to reproduce the issue:
./testpmd -c 0x2 --vdev 'eth_bond0,mode=0,
slave=0000:02:00.0,slave=0000:03:00.0' --
--port-topology=chained
root cause:
In existing case(vdev initialization and then pci
initialization), creates three Ethernet ports with
following port ids
0 - Bond device
1 - PCI device 0
2 - PCI devive 1
Since testpmd, calls the configure/start on all the ports on
start up,it will translate to following illegal setup sequence
1)bond device configure/start
1.1) pci device0 stop/configure/start
1.2) pci device1 stop/configure/start
2)pci device 0 configure(illegal setup case,
as device in start state)
The fix changes the initialization sequence and
allow initialization in following valid setup order
1) pcie device 0 configure/start
2) pcie device 1 configure/start
3) bond device 2 configure/start
3.1) pcie device 0/stop/configure/start
3.2) pcie device 1/stop/configure/start
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
