rte_flow update, following RFC [1], added to ethdev the rte_flow item
ipv6_frag_ext.
This patch updates testpmd CLI to support the new item and its fields.
To match on fragmented IPv6 packets, this item is added to pattern:
... ipv6 / ipv6_frag_ext ...
[1] http://mails.dpdk.org/archives/dev/2020-March/160255.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
rte_flow update, following RFC [1], introduced has_frag_ext field for
IPv6 header item, used to indicate match on fragmented/non-fragmented
packets.
This patch updates testpmd CLI to support the new field.
To match on non-fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 0 has_frag_ext mask 1 ...
To match on fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 1 has_frag_ext mask 1 ...
To match on any IPv6 packets, the has_frag_ext field should
not be specified for match.
[1] https://mails.dpdk.org/archives/dev/2020-August/177257.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch updates testpmd CLI to support fragment_offset field of
IPv4 header item.
To match on non-fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 0 fragment_offset mask 0x3fff ...
To match on fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 1 fragment_offset last 0x3fff
fragment_offset mask 0x3fff ...
(Use the full available range 1 to 0x3fff to include all possible
values.)
To match on any IPv4 packets, fragmented and non-fragmented,
the fragment_offset field should not be specified for match.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds shared action support to testpmd CLI.
All shared actions created via testpmd CLI assigned ID for further
reference in other CLI commands. Shared action ID supplied as CLI
argument or assigned by testpmd is similar to flow ID & limited to
scope of testpdm CLI.
Create shared action syntax:
flow shared_action {port_id} create [action_id {shared_action_id}]
[ingress] [egress] action {action} / end
Create shared action examples:
flow shared_action 0 create action_id 100 \
ingress action rss queues 1 2 end / end
This creates shared rss action with id 100 on port 0.
flow shared_action 0 create action_id \
ingress action rss queues 0 1 end / end
This creates shared rss action with id assigned by testpmd
on port 0.
Update shared action syntax:
flow shared_action {port_id} update {shared_action_id}
action {action} / end
Update shared action example:
flow shared_action 0 update 100 \
action rss queues 0 3 end / end
This updates shared rss action having id 100 on port 0
with rss to queues 0 3 (in create example rss queues were
1 & 2).
Destroy shared action syntax:
flow shared_action {port_id} destroy action_id {shared_action_id} [...]
Destroy shared action example:
flow shared_action 0 destroy action_id 100 action_id 101
This destroys shared actions having id 100 & 101
Query shared action syntax:
flow shared_action {port} query {shared_action_id}
Query shared action example:
flow shared_action 0 query 100
This queries shared actions having id 100
Use shared action as flow action syntax:
flow create {port_id} ... / end actions [action / [...]]
shared {action_id} / [action / [...]] end
Use shared action as flow action example:
flow create 0 ingress pattern ... / end \
actions shared 100 / end
This creates flow rule where rss action is shared rss action
having id 100.
All shared action CLIs report status of the command.
Shared action query CLI output depends on action type.
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following ethdev update in the previous patch of this series, this
patch adds CLI support to query information related to AGE action.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use sample action with ratio is 1 for mirroring flow, add
supports to set the different port or encap action for mirrored
packets.
The example of test-pmd command:
1. set sample_actions 1 port_id id 1 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 1 / port_id id 2...
The flow will result in all the matched ingress packets will be sent to
port 2, and also mirrored the packets and sent to port 1.
2. set raw_encap 0 eth src.../ ipv4.../...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 raw_encap index 0 / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets and with
the different encapsulated data and sent to wire.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add a new testpmd command 'set sample_actions' that supports the
multiple sample actions list configuration by using the index:
set sample_actions <index> <actions list>
The examples for the sample flow use case and result as below:
1. set sample_actions 0 mark id 0x8 / queue index 2 / end
.. pattern eth / end actions sample ratio 2 index 0 / jump group 2 ...
This flow will result in all the matched ingress packets will be
jumped to next flow table, and the each second packet will be
marked and sent to queue 2 of the control application.
2. ...pattern eth / end actions sample ratio 2 / port_id id 2 ...
The flow will result in all the matched ingress packets will be
duplicated and sent to the representor peer (VF or wire) on DPDK port 2,
and the each second packet will also be sent to E-Switch manager vport.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable. This commit enables specifying
any positive UDP destination port number for GENEVE protocol parsing.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Called rte_eth_dev_info_get() in testpmd, to get device info
so that speed capabilities can be printed under "show device info"
Bugzilla ID: 496
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_cldemote is similar to a prefetch hint - in reverse.
On x86, cldemote(addr) enables software to hint to hardware that line is
likely to be shared. This is quite useful in core-to-core communications
where cache-line is likely to be shared.
ARM and PPC implementation is provided with NOP and can be added if any
equivalent instructions could be used for implementation on those
architectures.
Signed-off-by: Omkar Maslekar <omkar.maslekar@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
There is a potential race condition in 'service_attr_get' which will cause
test failures since the service core thread is still running while the
values are being retrieved/reset.
This patch fixes the race condition by waiting for the service core thread
to stop before continuing with the unit test checks.
Fixes: 4d55194d76 ("service: add attribute get function")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since we are not holding the mbufs or creating any references
in the app, hence mbuf fast free offload can be enabled.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The resources held by crypto adapter should be freed when the
test suite exits.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The arguments passed to rte_event_crypto_adapter_caps_get() and
rte_event_crypto_adapter_create() are incorrect.
In the rte_event_crypto_adapter_caps_get(), event device id should
be the first argument and cryptodev id should be the second argument.
In the rte_event_crypto_adapter_create(), the event device id should
be the second argument.
Fixes: 3c2c535ecf ("test: add event crypto adapter auto-test")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The capability of a hardware event device should be checked before
creating a event crypto adapter in a particular mode. The test case
returns error if the mode is not supported.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Allows creation of net_null if vdev EAL option is not specified and
uninit vdev created in the test. The change also adds error checks
for vdev init and uninit.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
adapter_multi_eth_add_del() does vdev init but doesn't uninit them.
This causes issues when running event_eth_rx_adapter_autotest multiple
times.
The fix does vdev uninit before exiting the test.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
A new functions which uses the structure of the test vectors for SDAP
is added and call a functions responsible to call the test_pdcp_proto
with the test vector both for encapsulation and decapsulation.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The function test_pdcp_proto was relying to heavily on the structure
of test vectors for PDCP making it difficult to be reusable.
The function is changed to take all the test parameters as input and
does not need access to the tests vectors anymore.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
The test vectors are structured in a more readable way compared
to test vector for PDCP. This structure allows to have all the
information about a test vector at the same place.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the xform with right configuration.
For session based ops, sym session pool is created with
valid userdata size.
Fixes: 24054e3640 ("test/crypto: use separate session mempools")
Cc: stable@dpdk.org
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the cryptodev raw API test support to unit test.
In addition a new test-case for QAT PMD for the test type is
enabled.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates ``rte_crypto_sym_vec`` structure to add
support for both cpu_crypto synchronous operation and
asynchronous raw data-path APIs. The patch also includes
AESNI-MB and AESNI-GCM PMD changes, unit test changes and
documentation updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Switched from device specific test suite to unified
cryptodev test suite. Removed the armv8 device specific test suite.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ut_setup / ut_teardown are invoked for each test case by test framework.
The call inside test_stats is unnecessary and even incorrect.
This caused double free of objects such as crypto operation structure.
Trapped the issue when RTE_LIBRTE_MEMPOOL_DEBUG was enabled.
Fix issue by removing ut_setup / ut_teardown from test case implementation.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Adam Dybkowski <adamx.dybkowski@intel.com>
This patch adds AES-ECB 128, 192 and 256 support to the aesni_mb PMD.
AES-ECB 128, 192 and 256 test vectors added to cryptodev tests.
Signed-off-by: Marcel Cornu <marcel.d.cornu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
5G DL default symlink was pointing to a 4G vector.
Fixes: d762705308 ("app/bbdev: add test vectors for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
This patch replaces the usage of the word 'slave' with more
appropriate word 'worker' in QAT PMD and Scheduler PMD
as well as in their docs. Also the test app was modified
to use the new wording.
The Scheduler PMD's public API was modified according to the
previous deprecation notice:
rte_cryptodev_scheduler_slave_attach is now called
rte_cryptodev_scheduler_worker_attach,
rte_cryptodev_scheduler_slave_detach is
rte_cryptodev_scheduler_worker_detach,
rte_cryptodev_scheduler_slaves_get is
rte_cryptodev_scheduler_workers_get.
Also, the configuration value RTE_CRYPTODEV_SCHEDULER_MAX_NB_SLAVES
was renamed to RTE_CRYPTODEV_SCHEDULER_MAX_NB_WORKERS.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_lte_fec API is still experimental.
Fixes: efd453698c ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_5gnr_fec API is still experimental.
Fixes: 2d4306438c ("baseband/fpga_5gnr_fec: add configure function")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add in the "info_get" function to the driver, to allow us to query the
device.
No processing capability are available yet.
Linking bbdev-test to support the PMD with null capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In testsuite_setup(), ts_params is configured for first valid device.
The same device should be used as valid device in
test_device_configure_invalid_dev_id test case.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The option RTE_EAL_ALWAYS_PANIC_ON_ERROR was off by default,
and not customizable with meson. It is completely removed.
The function rte_dump_registers is a trace of the bare metal support
era, and was not supported in userland. It is completely removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This commit adds new rte_prefetchX_write() variants, that suggest to the
compiler to use a prefetch instruction with intention to write. As a
compiler builtin, the compiler can choose based on compilation target
what the best implementation for this instruction is.
Three versions are provided, targeting the different levels of cache.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Modify the test_sched application to build the hierarchical scheduler
with default subport bandwidth profile. It also allows to update
a subport with different subport rates dynamically
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
struct cmdline exposes platform-specific members it contains, most
notably struct termios that is only available on Unix. While ABI
considerations prevent from hinding the definition on already supported
platforms, struct cmdline is considered logically opaque from now on.
Add a deprecation notice targeted at 20.11.
* Remove tests checking struct cmdline content as meaningless.
* Fix missing cmdline_free() in unit test.
* Add cmdline_get_rdline() to access history buffer indirectly.
The new function is currently used only in tests.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Introduce classify implementation that uses AVX512 specific ISA.
rte_acl_classify_avx512x32() is able to process up to 32 flows in parallel.
It uses 512-bit width registers/instructions and provides higher
performance then rte_acl_classify_avx512x16(), but can cause
frequency level change.
Note that for now only 64-bit version is supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce classify implementation that uses AVX512 specific ISA.
rte_acl_classify_avx512x16() is able to process up to 16 flows in parallel.
It uses 256-bit width registers/instructions only
(to avoid frequency level change).
Note that for now only 64-bit version is supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch enables the optimized calculation of CRC32-Ethernet and
CRC16-CCITT using the AVX512 and VPCLMULQDQ instruction sets. This CRC
implementation is built if the compiler supports the required instruction
sets. It is selected at run-time if the host CPU, again, supports the
required instruction sets.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds new flags into the test_cpuflags() functions for ARM64
platform, such as RTE_CPUFLAG_SVE, etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
This commit adds testpmd capability to query and config FEC
function of device. This includes:
- show FEC capabilities, example:
testpmd> show port 0 fec capabilities
- show FEC mode, example:
testpmd> show port 0 fec_mode
- config FEC mode, example:
testpmd> set port <port_id> fec_mode auto|off|rs|baser
where:
auto|off|rs|baser are four kinds of FEC mode which dev
support according to MAC link speed.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
This patch adds tests for verifying telemetry data structures are
converted to JSON as expected. Both flat and recursive data structures
are tested, for all possible value types.
The app connects to the telemetry socket as a client, and registers one
command with a corresponding callback function. Each time the callback
function is called, it copies a global data variable to the data pointer
passed in by telemetry.
When a test case is run, the test case function builds up the global
data variable with the relevant data types, and the expected json string
output which should be generated from that. The 'test_output()' function
is used to trigger the callback and ensure the actual output matches
that expected.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As well as this is correct thing to close devices before exit, it is
also useful to test the closing devices from secondary process.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since the rawdev autotest can now be used to test all rawdevs on the
system, there is no need for a dedicated ioat autotest command.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Rather than having each rawdev provide its own autotest command, we can
instead just use the generic rawdev_autotest to test any and all available
rawdevs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Changed scripts to explicitly use Python 3 only, to avoid
maintaining Python 2.
Removed deprecation notices.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The ethdev port id should be 16 bits now. This patch changes the
variable size of port id in applications from 8 bits to 16 bits.
Fixes: e977e4199a ("app/testpmd: add commands to load/unload BPF filters")
Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ability to distinguish ICMP identifier fields in packets.
Distinguish ICMP sequence number field too.
Already supports ICMP code and type fields in current version.
Existing fields in ICMP header contain the required information.
ICMP header already is supported and no code change in RTE FLOW.
Extend testpmd CLI to include the fields of ident and sequence number.
One example:
flow create 0 ingress pattern eth / ipv4 /
icmp code is 1 ident is 5 seq is 6 /
end actions count / queue index 0 / end
The ICMP packet with code 1, identifier 5 and
sequence number 6 will be matched.
It will implement action counter and forward to queue 0.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A port can be closed in multiple situations:
- close command calling close_port() -> rte_eth_dev_close()
- exit calling close_port() -> rte_eth_dev_close()
- hotplug calling close_port() -> rte_eth_dev_close()
- hotplug calling detach_device() -> rte_dev_remove()
- port detach command, detach_device() -> rte_dev_remove()
- device detach command, detach_devargs() -> rte_eal_hotplug_remove()
The flow rules are flushed before each close.
It was already done in close_port(), detach_devargs() and
detach_port_device() which calls detach_device(),
but not in detach_device(). As a consequence, it was missing for siblings
of port detach command and unplugged device.
The check before calling port_flow_flush() is moved inside the function.
The state of the port to close is checked to be stopped.
As above, this check was missing in detach_device(),
impacting the cases of a multi-port device unplugged or detached
with the port detach command.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_dev_release_port() is called on all port close operations,
the event RTE_ETH_EVENT_DESTROY can be reliably used for resetting
the port status on the application side.
The intermediate state RTE_PORT_HANDLING is removed in close_port()
because a port can also be closed by a PMD in a device remove operation.
In case multiple ports are closed, calling remove_invalid_ports()
only once is enough.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, the information of Rx/Tx queues from PMD driver is not
displayed exactly in the rxtx_config_display function. Because
"ports[pid].rx_conf" and "ports[pid].tx_conf" maintained in testpmd
application may be not the value actually used by PMD driver. For
instance, user does not set a field, but PMD driver has to use the
default value.
This patch fixes rxtx_config_display so that the information of Rx/Tx
queues can be really displayed for the PMD driver that implement
.rxq_info_get and .txq_info_get ops callback function.
Fixes: 75c530c1bd ("app/testpmd: fix port configuration print")
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of desc is a per queue configuration. But in the check
function, nb_txd & nb_rxd are used to check whether the desc_id is
valid. nb_txd & nb_rxd are the global configuration of number of desc.
If the queue configuration is changed by cmdline liks: "port config xx
txq xx ring_size xxx", the real value will be changed.
This patch use the real value to check whether the desc_id is valid.
And if these are not configured by user. It will use the default value
to check it, since the rte_eth_rx_queue_setup & rte_eth_tx_queue_setup
will use a default value to configure the queue if nb_rx_desc or
nb_tx_desc is zero.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In txonly forward mode, the packet header is fixed by the initial
setting, including the packet length and checksum. So when the packets
varies, this may cause a packet header error. Currently, there are two
methods in txonly mode to randomly change the packets.
1. Set txsplit random and txpkts (x[,y]*), the number of segments
each packets will be a random value between 1 and total number of
segments determined by txpkts settings.
The step as follows:
a) ./testpmd -w xxx -l xx -n 4 -- -i --disable-device-start
b) port config 0 tx_offload multi_segs on
c) set fwd txonly
d) set txsplit rand
e) set txpkts 2048,2048,2048,2048
f) start
The nb_segs of the packets sent by testpmd will be 1~4. The real packet
length will be 2048, 4096, 6144 and 8192. But in fact the packet length
in ip header and udp header will be fixed by 8178 and 8158.
2. Set txonly-multi-flow. the ip address will be varied to generate
multiple flow.
The step as follows:
a) ./testpmd -w xxx -l xx -n 4 -- -i --txonly-multi-flow
b) set fwd txonly
c) start
The ip address of each pkts will change randomly, but since the header
is fixed, the checksum may be a error value.
Therefore, this patch adds a function to update the packet length and
check sum in the pkts header when the txsplit mode is set to rand or
multi-flow is set.
Fixes: 82010ef55e ("app/testpmd: make txonly mode generate multiple flows")
Fixes: 79bec05b32 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, if nb_txd is not set, the txpkts is not allowed to be set
because the nb_txd is used to avoid the number of segments exceed the Tx
ring size and the default value of nb_txd is 0. And there is a bug that
nb_txd is the global configuration for Tx ring size and the ring size
could be changed by some command per queue. So these valid check is
unreliable and introduced unnecessary constraints.
This patch adds a valid check function to use the real Tx ring size to
check the validity of txpkts.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When failing to configure VLAN offloads after the port was started, there
is no need to update the port configuration. Currently, when user
configure an unsupported VLAN offloads and fails, and then restart the
port, it will fails since the configuration has been refreshed.
This patch makes the function return directly instead of refreshing the
configuration when execution fails.
Fixes: 384161e006 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To set Tx vlan offloads, it is required to stop port firstly. But before
checking whether the port is stopped, the port id entered by the user
is not checked for validity. When the port id is illegal, it would lead
to a segmentation fault since it attempts to access a member of
non-existent port.
This patch adds verification of port id in tx vlan offloads and remove
duplicated check.
Fixes: 597f9fafe1 ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make is no longer supported, RTE_SDK, RTE_TARGET and CONFIG options
are no longer in use.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Remove the part that checks if there is enough room in the stack, it's
always true as long as size of stack >= MAX_BULK*rte_lcore_count().
This check used an atomic cmpset, and read / write to a shared size
variable. These operations result in some form of synchronization
that might get in the way of the actual stack testing.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Use rte_eal_wait_lcore to wait and get the return value for all cores.
This is used to propagate any error to the main core.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Replace the arguments array by one argument.
All objects in the args array have the same values, so there is no need
to use an array, only one struct is enough.
The args object is a lot smaller, and the allocation can be replaced
with a global variable.
As a consequence of using a single argument, there is no need to use a
loop to launch the test on every core one by one. Replace it with
rte_eal_mp_remote_launch.
The allocation of obj_table isn't needed either, because MAX_BULK is
small. The allocation can instead be replaced with a static array.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add more parameters into the macro TEST_RING_VERIFY and expand the scope
of application for it. Then replace all ring APIs check with
TEST_RING_VERIFY to facilitate debugging.
Furthermore, correct a spelling mistakes of the macro
TEST_RING_FULL_EMTPY_ITER.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do code clean up by moving repeated code inside 'test_ring_mem_cmp'
function to validate data and print information of enqueue/dequeue
elements if validation fails.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Validate the return value of single element enqueue/dequeue operation in
the test.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add check in test_ring_basic_ex and test_ring_with_exact_size for single
element enqueue and dequeue operations to validate the dequeued objects.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When using memcmp function to check data, the third param should be the
size of all elements, rather than the number of the elements.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ring capacity is (RING_SIZE - 1), thus only (RING_SIZE - 1) number of
elements can be enqueued into the ring.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When enqueue one element to ring in the performance test, a pointer
should be passed to rte_ring_[sp|mp]enqueue APIs, not the pointer
to a table of void *pointers.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add usage of rte_eth_link_to_str function to applications and docs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to set RSS level from ethdev config.
level-default will requests the default behavior.
level-outer will requests RSS to be performed on the outermost packet
encapsulation level.
level-inner will request RSS to be performed on the specified inner
packet encapsulation level, from outermost to innermost.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The bitrate library in DPDK is actually in a "bitratestats" directory,
so that is used by meson for the macro and library name.
Therefore, we need to update references to RTE_LIBRTE_BITRATE to
RTE_LIBRTE_BITRATESTATS in testpmd to have it found. Rather than
supporting both defines, since make is being removed, we can just
replace all instances of the former define with the latter.
To ensure testpmd links ok when this is done, we also need to add
bitratestats to the list of library dependencies.
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Sometime the user want to have fixed values of
encap/decap or header modify for all flows.
This will introduce the ability to choose from
fixed or dynamic values by setting the flag in
config.h
To use different value for each flow:
config.h: #define FIXED_VALUES 0
To use single value for all flows:
config.h: #define FIXED_VALUES 1
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Start support matching on icmpv4 and icmpv6.
Usage:
--icmpv4: add icmp item to match on.
--icmpv6: add icmpv6 item to match on.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Sometimes you need to check flow performance for
certain port and not all ports. Thus a portmask
option is needed.
Usage:
--portmask=N
Where N represent the hexadecimal bitmask of ports
used.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Instead of having single id value, use up to 256
values, thus we make sure that all flows will not
use same mark action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
All value must be converted into intended endianness.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce raw-encap and raw-decap actions.
The two actions are added in command line
options, and for the data to encap or decap
the user need to parse it within the command
line.
All values of raw-encap data is set to be fixed
values.
Usage example:
--raw-encap=ether,ipv4,udp,vxlan
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Currently, each call for add_rss_action will allocate
extra memory for rss_data, which will reflect bad results
on memory consumption for all flows, and will leads into
memory leak.
In this fix, it will check if it's allocated before
reallocating it.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce flag action support to flow perf
application.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce headers modify actions in the app.
All header modify actions will add different value
for each flow, to make sure each flow will create
and use it's own actions.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
