Add IAVF_RX_PTYPE_PARSER_ABORTED definition, so iavf driver will know
opcode for parser aborted packets.
Without this definition driver would have to rely on magic numbers.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This commit is a part for the DV counter optimization.
The batch counter dcs id starts from 0x800000 and none batch counter
starts from 0. As currently, the counter is changed to be indexed by
pool index and the offset of the counter in the pool counters_raw array.
It means now the counter index is same for batch and none batch counter.
Add the 0x800000 batch counter offset to the batch counter index helps
indicate the counter index is from batch or none batch container pool.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds SDP packet parsing support with custom L2 header,
adds support to include a field from custom header for flow tag
generation.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Modify resource allocation and freeing logic to support
dynamic topology commit while to traffic is flowing.
This patch also modifies SQ flush to timeout based on minimum shaper
rate configured. SQ flush is further split to pre/post
functions to adhere to HW spec of 96XX C0.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Sync mail box data structures to version 0x0005 to
that of kernel AF driver.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In function mlx5_devx_cmd_create_tir(), the 40 bytes of RSS key are
copied in 10 iterations, 4 bytes each time using the MLX5_SET macro.
As result the RSS key is copied into TIR context in swapped byte order.
This patch fixes the issue, using memcpy() to copy the RSS key as is.
The struct member mlx5_devx_tir_attr.rx_hash_toeplitz_key is updated
to byte array type.
Fixes: c3aea272ee ("net/mlx5: create advanced Rx object via DevX")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In the current state, when preforming read/write
transactions we must wait for a completion in order
to run the next transaction, and all transactions are
performed by order.
Relaxed Ordering is a PCI optimization which by enabling it
we allow the system to perform read/writes in a different
order without having to wait for completion and improve
the performance in that matter.
This commit introduces the creation of relaxed ordering
memory regions in mlx5.
As relaxed ordering is an optimization, drivers that
do not support it can simply ignore it and therefore
it is enabled by default.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce the DCF (Device Config Function) feature in the ice PMD, it
works as a standalone PMD which doesn't handle the packet Rx/Tx related
things. Its hardware entity is the VF.
Add the basic DCF hardware initialization, this is specified by devarg
'cap=dcf'.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add an opcode for getting VSI mapping table.
Add an virtchnl event code for VF reset done.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add DCF capability flag for VF.
Add an opcode for disabling DCF capability.
Add an virtchnl event code for AVF resetting completion.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add two virtchnl opcodes to send the AdminQ command, one is used to
send the descriptor, the other is used to send the buffer payload if
the AdminQ command has BUF flag set.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update copyright date to 2020.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch implements a special way of buffer handling when internal
QAT IM buffer is too small for Huffman dynamic compression operation.
Instead of falling back to fixed compression, the operation is now
split into multiple smaller dynamic compression requests (possible to
execute on QAT) and their results are then combined and copied into
the output buffer. This is not possible if any checksum calculation
was requested - in such case the code falls back to fixed compression
as before.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_noinline, preventing function to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
The keyword alignas can be replaced with __rte_aligned macro
for consistency and allow compilers compatibility control.
The macro __rte_cache_aligned is a shortcut including __rte_aligned
and RTE_CACHE_LINE_SIZE constant.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch adds the function for retrieving QAT firmware
version, required to check the internal capabilities that
depend on the FW version.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
This is a helper function in case components would like to do more work
than just logging a message based on log level, like for example
collecting some stats if the log type is DEBUG etc..
A few existing relevant usage converted to this new API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When setting the CONFIG_RTE_BUILD_SHARED_LIB to y,
and build the mlx5 pmd, there is a building error.
To fix it, add RTE_IBVERBS_LINK_DLOPEN to include
relative codes.
mlx5_common.o: In function `mlx5_glue_init':
drivers/common/mlx5/mlx5_common.c:324: undefined reference to `dlclose'
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds to MLX5 PMD the support of matching on IPv4 TTL and
IPv6 hoplimit.
Support is valid when using DV flow engine (Verbs flow engine doesn't
support matching on this field).
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The rte_pci.h file includes more header files than are actually needed,
which means that all users of it also include those headers. This patch
removes the unneeded headers - adding them elsewhere where other components
were requiring them but not including them directly.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This adds new device id to the list of Mellanox devices
that runs mlx5 PMD.
- BlueField-2 integrated ConnectX-6 Dx network controller
This device is not ready yet, it is in development stage.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Matan Azrad <matan@mellanox.com>
PTP functionality has been broken after a change in kernel
where enum npc_kpu_lc_ltype is change to allow adjustment of
LTYPE_MASK to detect all types of IP headers.
Syncing the required changes in DPDK to fix the issue.
The kernel side changes available in marvell SDK version SDK-10.3.2.x.
Fixes: b5dc314044 ("net/octeontx2: support base PTP")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If ibverbs_link is dlopen, the PMD and application should not
be linked with ibverbs, but the glue library is.
Unfortunately the ibverbs dependency was exported in the
variable ext_deps, so there were overlinking.
It is fixed by not exporting the dependency in ext_deps,
and recreating a limited dependency object for cflags only.
Fixes: 1dd7c7e38c ("net/mlx4: support meson build")
Fixes: 96d7c62a70 ("net/mlx5: support meson build")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The name of the variable pmd_dlopen is confusing because
it can be understood as true if the PMD is dlopen,
whereas it means the ibverbs glue layer is a dlopen library.
That's why it is renamed dlopen_ibverbs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If ibverbs_link is static and the application choose to link DPDK
as static libraries, both PMD and ibverbs libraries must be linked
as static libraries. And the dependencies of ibverbs (netlink) must
still be linked as shared libraries.
Unfortunately, meson forget about the static requirement for ibverbs
when generating the .pc file.
As a result, libibverbs, libmlx4, libmlx5 are listed in Requires.private
section (allowing to be linked as shared libraries) and libnl is missing.
A fix is in progress for meson, but anyway we will have to live without
such a fix until a better version of meson is widely available:
https://github.com/mesonbuild/meson/pull/6393
In order to avoid meson suggesting shared libraries in the section
Requires.private of the .pc file, the dependency object is recreated
with declare_dependency():
- cflags are extracted the libibverbs.pc
- ldflags, from libibverbs.pc, are processed to force
static flavor of ibverbs libraries, thanks to this syntax:
-l:libfoo.a
Fixes: 6affeabaf3 ("net/mlx: add static ibverbs linkage with meson")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The libibverbs (and libmlx4/5) can be statically embedded
in the shared PMD library, or in the application with the static PMD.
It was supported with make build system in
commit 2c0dd7b69f ("config: add static linkage of mlx dependency").
The same feature is enabled with meson when using pkg-config
(i.e. only if the call to dependency() is successful).
The fallback method for searching library with cc.find_library()
is not supported because the dependencies of the found library
would not be linked (no such info in .a file unlike .so).
The main difference, in meson build system, is the generated .pc file
giving arguments to link DPDK with the application.
Unfortunately the .pc file will not keep memory of the static linkage
option for libibverbs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable build is already initialized as true in
drivers/meson.build. Duplicate initializations can be removed from mlx.
When the variable build is set to false, it is easier to call
subdir_done() than branch the rest of the code on build condition.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The glue shared library name was created by the common class FMT name,
driver_name_fmt = 'rte_common_@0@', which is not correlated with
LIB_GLUE_BASE = 'librte_pmd_mlx5_glue.so'.
This causes the dynamic linkage of the glue library to fail what
remained mlx5 drivers outside the PCI driver list.
The command:
MLX5_GLUE_PATH=$(pwd)/build-meson/drivers/common/mlx5
build-meson/app/dpdk-testpmd -n 4 -w 0000:00:05.0 -w 0000:00:06.0 -- -i
The log:
common_mlx5: Cannot load glue library:
/usr/local/lib64/dpdk/pmds-20.0.1-glue/librte_pmd_mlx5_glue.so.20.02.0:
cannot open shared object file: No such file or directory
Adjust the shared library name to the LIB_GLUE_BASE definition.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Matan Azrad <matan@mellanox.com>
To provide the better PCIe bandwidth utilization the ConnectX-4LX
NIC supports the multi-packet write (MPW) sessions allowing to
pack multiple packets into one descriptor (WQE). This is legacy
feature and it has some limitations on the packets and data
description segments. To provide the best performance all inline
packets must be put into shared data segment and the total length
of MPW session must be limited. The limit is controlled with
txq_inline_mpw devarg.
Fixes: 82e75f8323 ("net/mlx5: fix legacy multi-packet Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new symbols should be in ABI version 20.0.1.
Fixes: 89214fe915 ("net/iavf/base: move to drivers common directory")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Changed the ABI version to 20.0.1.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Currently otx2_mbox_get_rsp_xxx get response once AF driver
interrupts after completion. But this function will get into
deadlock if called in another interrupt context.
To avoid it, implemented another version of this function which polls
on dedicated memory for a given timeout.
Also after clearing interrupt, there could UP messages available for
processing. So irq handler must check mbox messages.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
fill_sg_comp_from_iov() prepares gather components for i/p IOV
buffers and extra buf. This API is failing to create a gather component
for extra_buf when IOV buf len is zero. Though there is enough space
to accommodate extra_buf, because of pre-decrementing of extra_buf
length from aggregate size, this issue is seen.
Fixes: b74652f3a9 ("common/cpt: add microcode interface for encryption")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Returning error when cipher and auth key are not getting set
Fixes: 6cc5409652 ("crypto/octeontx: add supported sessions")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
lookup_mem provides fast accessing of data path fields.
Storing sa indices in lookup_mem which are required in
inline rx data path.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding the infrastructure to save one opaque pointer in idev and
implement the consumer-producer in the PMDs which uses it accordingly.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This routine returns true if given rte_eth_dev is security offload
capable and belongs to octeontx2.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
