Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Intel VT-d supports different address widths for the IOVAs, from
39 bits to 56 bits.
While recent processors support at least 48 bits, VT-d emulation
currently only supports 39 bits. It makes DMA mapping to fail in this
case when using VA as IOVA mode, as user-space virtual addresses uses
up to 47 bits (see kernel's Documentation/x86/x86_64/mm.txt).
This patch parses VT-d CAP register value available in sysfs, and
forbid VA as IOVA mode if the GAW is 39 bits or unknown.
Fixes: f37dfab21c ("drivers/net: enable IOVA mode for Intel PMDs")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Chas Williams <chas3@att.com>
To receive events from given event port, corresponding
function needs to be added which receives events
from portal. Also added function to consume received
events based on entry index.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With the current QBMAN multi-tx API, we need to create separate
enqueue descriptors for each of the packet which is required to
be enqueued to the hardware, once we support Atomic Queues
(with DCA) in dpaa2 drivers. Creating enqueue descriptor for
each packet is costly and have significant performance impact.
This patch introduces a flag parameter in the QBMAN multi-tx API,
so that DCA configuration (and later on ORP/ODP for ordered queues)
can be passed using flags and be updated in the EQCR using this flag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch provides cleaner approach to store the DQRR entries,
which are yet to be consumed in case of atomic queues.
Also, this patch changes the storage of the DQRR entry index
into the mbuf->seqn instead of ev->opaque
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A new API qbman_swp_dqrr_idx_consume is defined which takes
input as DQRR index to consume corresponding DQRR entry.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
FSLMC bus detects a multiple type of logical objects representing
components of the datapath.
Using the type of device, a newly introduced API
rte_fslmc_get_device_count can return the count of devices
scanned of that device type.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA hardware support two kinds of queues:
1. Pull mode queue - where one needs to regularly pull the packets.
2. Push mode queue - where the hw pushes the packet to queue. These are
high performance queues, but limited in number.
This patch add the driver support for push mode queues.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
HW portal is a processing context in DPAA. This patch allow
creation of a queue specific HW portal context.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Replace the byte based tail queue congestion support
with frame count based congestion groups.
It can easily map to number of RX descriptors for a queue.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch update the logic and expose the soc value
register, so that it can be used by other modules as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding support for DPDK packet parsing logic for LX2
platform to accommodate the new FRC format introduced in LX2.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Setting correct frame size in dpaa2_dev_mtu_set
api call. Also correcting the correct max frame size
setting in hardware while dev_configure for jumbo frames
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
This patch expose the dpaa2 soc platform family type.
This is required to make some soc variant specific
decision during configuration and runtime.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dynamic iova detection for DPAA2
devices and use of virtual address in such cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA and DPAA2 drivers were using memseg physaddr, which
has been deprecated.
Fixes: 7ba49d39f1 ("mem: rename segment address from physical to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Fix the following compilation error when compiling
with ARM BE compiler.
drivers/bus/dpaa/include/fsl_qman.h:1997:25:
error: statement with no effect [-Werror=unused-value]
#define hw_sg_to_cpu(x) (x)
Fixes: c47ff048b9 ("bus/dpaa: add QMAN driver core routines")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Changing the EQCR stashing threshold boosts the performance
of l3fwd application on LS2088 by more than 20% as it helps
in burst packet processing at the Tx side. CPU is immediately
informed about the empty EQCR entries once consumed by the
hardware.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
For virtio legacy device, testpmd startup fails when using uio_pci_generic.
The issue is caused by invoking the function pci_ioport_map. The correct
value of intr_handle.type is already set before calling it, we should avoid
overwriting the default value "RTE_INTR_HANDLE_UNKNOWN" in this function.
Besides, the removal has no harm to other cases because it is set to 0 by a
memset on the whole struct during allocation in the function pci_scan_one.
Such assignments are removed in the meanwhile in pci_uio_map_resource(),
pci_vfio_map_resource_primary() and pci_vfio_map_resource_secondary() in
order to keep consistencies and avoid future questions.
Fixes: 756ce64b1e ("eal: introduce PCI ioport API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
The scan callback allows to spawn a vdev automatically
given some custom scan rules.
It is especially useful to create a TAP device automatically
connected to a netdevice as remote.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
In real life, kernel version is only weakly corolated with presence
or absence of defines in header files. Instead, check directly if
the needed value is defined.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This fixes the use of an never defined PPC64 define in
ret_pci_get_iommu_class.
Fixes: b48e0e2d9c ("bus/pci: fix IOMMU class for sPAPR")
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Use specialized dynamic log type for vdev bus logging.
Suggested-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Suggested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The function pci_get_sysfs_path was moved from EAL to the PCI driver.
The namespace is now fixed by adding "rte_" prefix.
The map files are fixed by removing the symbol from EAL and adding
it to the PCI driver.
It is an API break but it is probably not used by applications.
Anyway this API is already broken by the move in a new header file.
Fixes: c752998b5e ("pci: introduce library and driver")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
PPC64 sPAPR iommu does not support iova as va.
Use pa mode instead.
Fixes: 815c7deaed ("pci: get IOMMU class on Linux")
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
