In case error packets are received by the Ethernet interface,
this patch enables receiving packets on the error queue,
printing the error and the error packet.
To enable, use the dev_arg as : fslmc:dpni.1,drv_error_queue=1
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables support to use the first segment
headroom to build the HW required Scatter Gather
Table. (if space is available).
This will avoid 1 less buffer for SG buffer creation.
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
add support for MPLS based distribution is supported.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The dpaa2 drivers have been hacking the deprecated field seqn for
internal features.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
DEV_RX_OFFLOAD_TIMESTAMP is per port, so the internal implementation
shall enable it on per port basis only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This experimental API is no longer required as the same
purpose can be solved with standard DEV_RX_OFFLOAD_TIMESTAMP
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Avoids recalculation of DPAA2_IOVA_TO_VADDR, since this is somewhat
costly function on no-IOMMU setups.
Brings about 0.5 Gbps improvement at 19 Gbps speeds on LX2160 with 512b
packets.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update the portal allocation failure log to print the thread id
as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When IOVA is physical address do not prefetch the annotation
of the next frame, as there is a cost involved there to convert
the physical address to virtual address.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_noinline, preventing function to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In the packet transmit, if the QBMAN is not able to process the
packets, the Tx function loops infinitely to send the packet out.
This patch changes the logic retry for some time (count) and then
return.
Fixes: cd9935cec873 ("net/dpaa2: enable Rx and Tx operations")
Fixes: 16c4a3c46ab7 ("bus/fslmc: add enqueue response read in qbman")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
This patch sets the port in mbuf for event scenarios as well
Fixes: b677d4c6d281 ("net/dpaa2: add API for event Rx adapter")
Fixes: 2d3788631862 ("net/dpaa2: support atomic queues")
Fixes: 16c4a3c46ab7 ("bus/fslmc: add enqueue response read in qbman")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX confirmation mode provides dedicated confirmation
queues for transmitted packets. These queues are used
by software to get the status and release
transmitted packets buffers.
By default TX confirmation mode is kept disabled.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When we need particular number of packets from the rx routine,
which would change in every call, we cannot prefetch the packets
and provide previous results to the user.
User can select the mode by using devargs for non prefetch mode.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch resets frc and ctrl in sg tx fd to avoid corruption.
Fixes: 774e9ea91992 ("net/dpaa2: add support for multi seg buffers")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The I/O threads for DPAA2 take their reference for bpool ID, the
port ID and other info like qdid, from the rte_eth_dev. Further,
to get this data during I/O operation, a reference of the RTE
device is kept in the queue structure (dpaa2_queue).
In case of secondary processes, rte_eth_dev is not same as the
primary process. Thus, the reference goes invalid.
This patch changes the implementation to use the dev_private
rather than the rte_eth_dev as that is shared area across
all the processes.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch enables the population of timestamp field
in mbuf on packet receive.
It may give performance impact on LX2xxx platforms.
So, it has been made optional for Lx2xxx platform.
One shall call, rte_dpaa2_enable_ts() to enable it.
Nothing is required for LS2 and LS1088 platforms.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch adds the support to update the mbuf vlan tci field
from the HW parse results in annotation area.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
various field of FD structure was getting reset in scattered
fashion. This patch align them in single macro.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch copies the flc based hw provided hash results
to the mbuf rss field for lx2 platform only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case of LX2 we get parse result summary in FD. We do not need to
prefetch and read the annotation to fetch the parse results.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch fixes prefetch rx routine to
set the next prefetch request to the size of nb_pkts.
It assumes that next request would ideally be
of same size.
Fixes: 4bc5ab88dbd6 ("net/dpaa2: fix Tx only mode")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
In case of Receive from Ethernet we add a new pull request (prefetch)
but do not fetch the results from that pull request until next
dequeue operation. This keeps the portal in busy mode.
This patch updates the portals bifurcation to have separate portals
to receive packets for Ethernet and all other devices to use a
common portal.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds software prefetching of the annotation which is
accessed by the driver to fetch the parsing results. The changes
also include as many instructions in between prefetching memory
and using it.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Fixes: 774e9ea91992 ("net/dpaa2: add support for multi seg buffers")
Fixes: d2ef05d5c13e ("net/dpaa2: optimize Rx/Tx path")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
With the current QBMAN multi-tx API, we need to create separate
enqueue descriptors for each of the packet which is required to
be enqueued to the hardware, once we support Atomic Queues
(with DCA) in dpaa2 drivers. Creating enqueue descriptor for
each packet is costly and have significant performance impact.
This patch introduces a flag parameter in the QBMAN multi-tx API,
so that DCA configuration (and later on ORP/ODP for ordered queues)
can be passed using flags and be updated in the EQCR using this flag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
As there were less number of CPU cycles in between when we access
the parse results and when we prefetch them, this patch modifies
the prefetch of the next parse result.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
