Currently, if there is no procfs mounted, test application will
fail to run any multiprocess-related autotests (EAL flags etc.)
without a clear explanation as to why this happens.
Add a check specifically for that condition, as well as add a
general stringified error message to rte_panic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
In ppc64le, expanding DMA areas always fail because we cannot remove
a DMA window. As a result, we cannot allocate more than one memseg in
ppc64le. This is because vfio_spapr_dma_mem_map() doesn't unmap all
the mapped DMA before removing the window. This patch fixes this
incorrect behavior.
I also fixed the order of ioctl for unregister and unmap. The ioctl
for unregister sometimes report device busy errors due to the
existence of mapped area.
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Issue is observed while running 'metrics_autotest' continuously
without quiting. During first execution all test cases pass but
second run onwards first test case fails as library is already
initialized.
To resolve, introduced a new API to deinitialise the library
after all test cases are executed.
Fixes: cd3804242901 ("test/metrics: add unit tests for metrics library")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Once the library usage is over, it must be deinitialized which
will free the shared memory reserved during initialization.
Observed an issue while running 'metrics_autotest' continuously
without quiting. For the first run 'metrics_autotest' passes
all test cases but second run onwards first test case fails
because metrics library is already initialized during first run.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Since gcc-8.3(I tried 8.3 and 9.1), the meson build failed on ThunderX2.
It got the following compiling errors:
/usr/lib/gcc/aarch64-linux-gnu/9/include/arm_neon.h:26493:1: error:
inlining failed in call to always_inline ‘vmull_p64’:
target specific option mismatch 26493 | vmull_p64 (poly64_t a, poly64_t b)
Fixes: 7286c9d7234f ("config: add thunderx2 machine")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Jingzhao Ni <jingzhao.ni@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Putting color escape sequences in the log look pretty for the
developer but fails in real world DPDK usage. A real application
will put DPDK log to syslog, and syslog does not handle escape
sequences.
Fixes: dd543124cd93 ("common/octeontx2: add runtime log infra")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Shreyansh is no longer with NXP.
Pankaj is no longer working on DPDK.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
LS1088 platform CENA operation are causing issues
at high load. CINH (cache inhibited) mode is working
fine with minor performance impact.
This patch enables CINH mode selectively on LS1088 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds following:
1. 'g_container' variable name is not right way to represent the
FSLMC container. Renaming it to fslmc_container.
2. dynamic selection of IOMMU mode based on run environment
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Recent (18.11+), devargs structure was changed and so was DPDK port
usage in applications like OVS. Applications are now allowed to
plug/unplug ports (eth) using APIs (hotplug) based on device
arguments.
This patch enables the plug/unplug function (which are dummy for
FSLMC) and the iterator function for rte_dev_probe() and similar
API support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
va2pa depends on the physical address and virtual address offset of
current mbuf. It may get the wrong physical address of next mbuf which
allocated in another hugepage segment.
In rte_mempool_populate_default(), trying to allocate whole block of
contiguous memory could be failed. Then, it would reserve memory in
several memzones that have different physical address and virtual address
offsets. The rte_mempool_populate_default() is used by
rte_pktmbuf_pool_create().
Fixes: 8451269e6d7b ("kni: remove continuous memory restriction")
Cc: stable@dpdk.org
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update KNI documentation to reflect current ethtool support.
Replace references to out dated tools (ifconfig) with
modern iproute2. Tshark is a better replacement for tcpdump.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some applications use ethtool so add the minimum ethtool ops.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_kni does not follow standard style rules.
Noticed some extra \ line continuation etc.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The correct thing to return if user gives a bad data
is to return -EFAULT. Logging is also discouraged because
it could be used as a DoS attack.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Using void * instead of proper type is unsafe practice.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Several fields were either totally unused or set and never used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since kernel 2.6.28 the network subsystem has provided
dev->stats for devices to use statistics handling and is the
default if no ndo_get_stats is provided.
This allow allows for 64 bit (rather than just 32 bit)
statistics with KNI.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
netdev_alloc_skb is optimized to any alignment or setup
of skb->dev that is required. The kernel has chosen to not pad
packets on x86 (for many years), because it is faster.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The netdev subsystem already handles case where
network sevice does not support ioctl.
If device has no rx_mode hook it is not called.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update platform support of CNF95xx in documentation and
also, update the HW cap based on PCI subsystem id and revision id.
This patch also changes HW capability handling to be based on
PCI Revision ID. PCI Revision ID contains a unique identifier
to identify chip, major and minor revisions.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The config create function did not store the mem config address in
the shared memconfig structure, so the secondary processes couldn't
map it at the required address.
Fixes: b149a7064261 ("eal/freebsd: add config reattach in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Samples apps that depend on the power library should not build if
the power library is not present. So now the following apps will
check to see if it's built, else skip building.
* l3fwd-pwer
* vm_power_manager
* guest_cli
Fixes: e0130788576f ("examples/power: support meson/ninja build")
Fixes: 89f0711f9ddf ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The commit db90b4969e2e ("vfio: retry creating sPAPR DMA window")
introduced a build breakage on old Linux. Linux <4.2 does not define ddw in
struct vfio_iommu_spapr_tce_info. Without ddw, we cannot change window size
and so should give up the creation. I just exculuded the retrying code if
ddw is not supported.
Fixes: db90b4969e2e ("vfio: retry creating sPAPR DMA window")
Signed-off-by: Takeshi Yoshimura <tyos@jp.ibm.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
The pdump tool works as the secondary process. When the primary process
exits and the residual secondary process keeps running, it will make the
primary process can't start up again. Since the ex-fbarry files are still
attached by the secondary process pdump, the 'new' primary process can't
get these files locked.
The patch is to set up an alarm which runs every 0.5s periodically
to monitor the primary process in the pdump. Once the primary exits,
so will the pdump.
Signed-off-by: Suanming Mou <mousuanming@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
A secondary process cannot access HW mempool already
initiazed by primary, and neither it can setup its own
HW mempool due to its own restrictions.
Since dpdk-pdump creates mempool for managing its local
mbufs, SW mempool is capable enough to solve this purpose.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
6 issues caught by Coverity 343465
* Possible divide by zero on 3 lines
* Convert to float then back to int, losing precision on 3 lines
This patch modifies the code so that it only assigns calculated
values if the divisor is > 0, otherwise sets metrics to zero.
Also removes the un-needed round() function.
Coverity issue: 343465
Fixes: 609e79841fcf ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
any core on the system. By using appropriate permissions, FIFO interfaces
can be configured to only affect the particular cores.
Because each FIFO is per core, the following fields have been removed
from the command JSON format: core_list, resource_id, name.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Lukasz Gosiewski <lukaszx.gosiewski@intel.com>
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch fixes the out-of-bounds coverity issue by removing the
offending line of code at line 107 in rte_flow_classify_parse.c
which is never executed.
Coverity issue: 343454
Fixes: be41ac2a330f ("flow_classify: introduce flow classify library")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Currently, when fbarray is destroyed, the fbarray structure is not
zeroed out, which leads to stale data being there and confusing
secondary process init in legacy mem mode. Fix it by always
memsetting the fbarray to zero when destroying it.
Fixes: 5b61c62cfd76 ("fbarray: add internal tailq for mapped areas")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Populating the eventfd in rte_intr_enable in each request to vfio
triggers a reconfiguration of the interrupt handler on the kernel side.
The problem is that rte_intr_enable is often used to re-enable masked
interrupts from drivers interrupt handlers.
This reconfiguration leaves a window during which a device could send
an interrupt and then the kernel logs this (unsolicited from the kernel
point of view) interrupt:
[158764.159833] do_IRQ: 9.34 No irq handler for vector
VFIO api makes it possible to set the fd at setup time.
Make use of this and then we only need to ask for masking/unmasking
legacy interrupts and we have nothing to do for MSI/MSIX.
"rxtx" interrupts are left untouched but are most likely subject to the
same issue.
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1654824
Fixes: 5c782b3928b8 ("vfio: interrupts")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
The unicode characters to draw the debugfs tree
may fail with some Latex distributions.
These characters are replaced with some ASCII equivalents.
Fixes: 14ad4f018453 ("doc: add Marvell OCTEON TX2 platform guide")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The command "make doc-guides-pdf" is failing because
there are more than 1500 lines in the file MAINTAINERS
which is included in the contributing guide.
We are facing the issue mentioned in this comment:
https://github.com/sphinx-doc/sphinx/issues/3099#issuecomment-256440704
Anyway the file MAINTAINERS is mentioned several times in the guide.
So the "literalinclude" is removed from the guide to fix the build
of the PDF.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The cmdline_parse_ether_addr does not need to be used everywhere
in testpmd. Can use rte_ether_unformat_addr instead.
As an added bonus it eliminates some code for copying.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The cmdline library used to be the only way to parse a
mac address. Now there is rte_ether_unformat_addr.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Now that there is a version of ether_aton in rte_ether, it can
be used by the cmdline ethernet address parser.
Note: ether_aton_r can not be used in cmdline because
the old code would accept either bytes XX:XX:XX:XX:XX:XX
or words XXXX:XXXX:XXXX and we need to keep compatibility.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Using bit operations like or and xor is faster than a loop
on all architectures. Really just explicit unrolling.
Similar cast to uint16 unaligned is already done in
other functions here.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Use rte_eth_unformat_addr, so that ethdev can be built and work
without the cmdline library. The dependency on cmdline was
an arrangement of convenience anyway.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make a function that can be used in place of eth_aton_r
to convert a string to rte_ether_addr. This function
allows both byte (xx:xx:xx:xx:xx:xx) and word (XXXX:XXXX:XXXX)
format and has the same lack of error handling as the original.
This also allows ethdev to no longer have a hard dependency
on the cmdline library.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
