Instead of setting up a queue memzone name like "port0_rxq0", "port0_txq0",
it could be simplified a bit to something like "port0_vq0", "port0_vq1" ...
Meanwhile, the code is also simplified a bit.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This reverts commit 9a0615af77 ("virtio: fix restart"); conflict is
manually addressed.
Kyle reported an issue with above commit
qemu-kvm: Guest moved used index from 5 to 1
with following steps,
1) Start my virtio interfaces
2) Send some traffic into/out of the interfaces
3) Stop the interfaces
4) Start the interfaces
5) Send some more traffic
And here are some quotes from Kyle's analysis,
Prior to the patch, if an interface were stopped then started, without
restarting the application, the queues would be left as-is, because
hw->started would be set to 1. Now, calling stop sets hw->started to 0,
which means the next call to start will "touch the queues". This is the
unintended side-effect that causes the problem.
We should not touch the queues once the init is done, otherwise, the vring
state of virtio PMD driver and vhost-user would be inconsistent, leading
some issue like above.
Thus this patch is reverted.
Fixes: 9a0615af77 ("virtio: fix restart")
Reported-by: Kyle Larose <klarose@sandvine.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Coverity detected this as an issue because internals->data will never be NULL,
then the check is not necessary.
Coverity issue: 137873
Fixes: d082c0395b ("ring: fix memory leak when detaching")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_eal_pci_probe_one function could return false positive result if
no driver is found for the device.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This commit fixes problem with device hanging because of
wrong pointer values in snow3g performance test
Fixes: 97fe6461c7 ("app/test: add SNOW 3G performance test")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Updated comments on API to clarify which parts of mbufs are
copied or changed by crypto operations.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
num_route_entries needs to be resetted.
Fixes: 17d60f5b5e ("app/test: remove large IPv4 LPM data file")
Signed-off-by: Nikita Kozlov <nikita@elyzion.net>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The memory pointed by lpm->rules_tbl should also be freed
when memory malloc for tbl8 fails in rte_lpm_create_v1604( ).
And the memory pointed by lpm->tbl8 should also be freed
when the lpm object is freed in rte_lpm_free_v1604( ).
Fixes: f1f7261838 ("lpm: add a new config structure for IPv4")
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Wei Dai <wei.dai@intel.com>
If the user asks to probe multiple times, the probe
callback should only be called on devices that don't have
a driver already loaded.
This is useful if a driver is registered after the
execution of a program has started and the list of devices
needs to be re-scanned.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Close the file descriptor after finish using it.
Fixes: 9ae15538 ("eal/ppc: cpu flag checks for IBM Power")
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Close the file descriptor after finish using it.
Fixes: b94e5c94 ("eal/arm: add CPU flags for ARMv7")
Fixes: 97523f82 ("eal/arm: add CPU flags for ARMv8")
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
The library was named libethdev without rte_ prefix.
It is now fixed, the library namespace is consistent.
Note: the ABI version has already been changed in this release cycle.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_device/driver generalization patches [1] were merged without a change
in the LIBABIVER variable. This patches bumps the macro of affected libs:
- libcryptodev and libetherdev have been bumped
- librte_eal version changed in
d7e61ad3ae ("log: remove deprecated history dump")
Details of ABI/API changes:
- EAL [version already bumped in: d7e61ad3ae]
|- type field was removed from rte_driver
|- rte_pci_device now embeds rte_device
|- rte_pci_resource renamed to rte_mem_resource
|- numa_node and devargs of rte_pci_driver is moved to rte_driver
|- APIs for device hotplug (attach/detach) moved into EAL
|- API rte_eal_pci_device_name added for PCI device naming
|- vdev registration API introduced (rte_eal_vdrv_register,
| rte_eal_vdrv_unregister
- librte_crypto (v 1=>2)
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
- librte_ethdev (v 4=>5)
|- rte_eth_dev_type is removed
|- removed dev_type from rte_eth_dev_allocate API
|- removed API rte_eth_dev_get_device_type
|- removed API rte_eth_dev_get_addr_by_port
|- removed API rte_eth_dev_get_port_by_addr
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
Also, deprecation notice from 16.07 has been removed and release notes for
16.11 added.
[1] http://dpdk.org/ml/archives/dev/2016-September/047087.html
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
When trying to install PDF, man pages or examples without having built
neither HTML API nor HTML guides, there was an error:
% make install-doc
tar: html: Cannot stat: No such file or directory
The fix is to check the html directory before installing HTML files.
Fixes: e4552b9cc6 ("mk: install doc")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The driver qede does not depend on zlib anymore.
Fixes: 7d178e9ef6 ("net/qede: remove zlib dependency and enable PMD")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
checkpatch raise some false positives when run outside of the kernel tree.
The script checkpatch.pl from the kernel checks a list
of structs known to be const.
It is obviously not relevant as DPDK has not such list.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Subject in an email can be split on two lines.
In such case, the second line (starting with a space) can be
joined to the first one.
It is handled differently when parsing stdin or a file.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The commit e13fbc065c ("scripts: improve quiet checkpatch")
removed the line "total: 1 errors, 0 warnings, 7 lines checked"
from the quiet report.
Later, commit e7c38f4713 ("scripts: remove useless checkpatch notes")
removed few lines before "total:.*lines checked", so it was not working
well for quiet reporting.
Better to keep the "total:" line in quiet mode and remove the other ones.
That's why the checkpatch.pl option --no-summary is not used anymore
by reverting the commit e13fbc065c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This script can help to find commits to backport in stable branches.
Fixes are found if there is the word "fix" in the headline or
if there is a tag Fixes: or Reverts: in the message.
Chained fixes of fixes are explored to find the oldest origin.
Fixes of not released bugs are ignored.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This summarizes the "how to call dpdk-devbind" in one place to be
picked up by html/pdf/man-page docs.
That knowledge was available before but spread in various docs along
examples (which are great and have to be kept) as well as in the
--usage/--help option of the tool itself.
As a root only program in sbin it should belong to section 8
"8 System administration commands (usually only for root)"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This summarizes the "how to call dpdk-pmdinfo" in one place to be picked
up by html/pdf/man-page docs.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This enables the rendering of rst into man pages as well as installing
them (if built) along the binaries. To do so there is a new make target
"doc-guides-man" which will render the rst files into man format.
Currently these three tools had docs that were compatible "enough" to
make up for a reasonable manpage.
- testpmd
- dpdk-pdump
- dpdk-procinfo
Since a man page should be installed along the binary they are not
installed in install-doc but install-runtime insteade. If not explicitly
built by the "doc-guides-man" target before calling install-runtime
there is no change to the old behaviour.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This is to clarify the scope of these documents that are more tools than
sample applications.
Also this is a preparation step to add more tools and generate man pages
off of their rst files.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The note i.e. "The dpdk-pdump tool can only be used in
conjunction with a primary process which has the packet
capture framework initialized already" is added to
doc/guides/sample_app_ug/pdump.rst to facilitate
easy understanding on the usage of the tool.
Suggested-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Earlier ethdev library created the device names in the
"bus:device.func" format hence pdump library implemented
its own conversion method for changing the user passed
device name format "domain🚌device.func" to "bus:device.func"
for finding the port id using device name using ethdev library
calls. Now after ethdev and eal rework
http://dpdk.org/dev/patchwork/patch/15855/,
the device names are created in the format "domain🚌device.func",
so pdump library conversion is not needed any more, hence removed
the corresponding code.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
offsets for digest and data need to be adjusted
to take prepended IV into account
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
QAT PMD adjusts the buffer start address and offsets passed
to the device so that the DMAs in and out of the device are
64-byte aligned.
This gives more consistent throughput, which had been
variable depending on how the application set up the mbuf.
The message builder code had to be considerably re-factored
to do this efficiently.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch replaces name "libcrypto" to "openssl" from file directories,
symbol prefixes and sub-names connected with old name.
Renamed poll mode driver files, test files, and documentations.
It is done to better name association with library because
the cryptography operations are using Openssl library crypto API.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds continual performace tests to Intel(R) QuickAssist
Technology tests suite. Performance tests are run continually with
some number of repeating loops.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds tests with corrupted data to the Intel QuickAssist
Technology tests suite in test_cryptodev.c
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Allow Data Center Bridge (DCB) configuration when SRIOV is enabled.
Signed-off-by: Rahul R Shah <rahul.r.shah@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Not all speed capabilities can be reported properly before Linux 4.8 (25G,
50G and 100G speeds are missing), moreover the API to retrieve them only
exists since Linux 4.5, this commit thus implements compatibility code for
all versions.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When verifying the Hash filtering on X722, we found a problem that
the hash value in descriptor is incorrect. The root cause is that X722
uses different way of hash key word selection compared with X710/XL710.
This patch fixes it by setting X722 specific key selection.
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Because some registers are only supported by X722, for example,
I40E_GLQF_FD_PCTYPES, the driver needs to use the mac type to distinguish
the behavior of X722 from X710 and other NICs, or it would result in
errors on X710.
Fixes: 8c5cb3c115 ("net/i40e: add packet type translation for X722")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
o Fix the fastpath status block index such that each queue pair shares
the same index value.
o Add ecore_vf_get_num_sbs() API that returns the number of status
blocks assigned by PF. Use that to decide how many VF queues can be
advertised. Additionally, restrict maximum number of VF queues to 16
for 100G VF case.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
