Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
While most windows apps can handle both "\" and "/" as path separators,
"more" is treating the "/" as the start of a command-line flag in this
case, causing errors.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add the make and meson based build infrastructure for the eMAG platform
from Ampere Computing corp., which is a 64-bit ARM processor with 32
Armv8 64-bit CPU cores. For more information, refer to:
https://amperecomputing.com/product/
Signed-off-by: Jerry Hao OS <jerryhao@os.amperecomputing.com>
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To make the list complete and consistent, add cortex-a76 configuration.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Arm N1 SDP is an infrastructure segment development platform
based on armv8.2-a Neoverse N1 CPU. For more information, refer to:
https://community.arm.com/developer/tools-software/oss-platforms/w/
docs/440/neoverse-n1-sdp
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.
In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.
We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customize the BMC configuration like change the sensors.
Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.
For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1
To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add IRQ support for ifpga FME global error, port error and unit.
We implemented this feature by vfio interrupt mechanism.
To build this feature, CONFIG_RTE_EAL_VFIO should be enabled.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch disables the 1588 timer support by default on DPAA2
platform due to the performance impact.
By default it is disabled in config/common_base, so remove the entry
from DPAA2.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The meson build was missing the define to enable pcap port support if
libpcap (development) package was found on the build platform. Rather than
duplicating the checks for libpcap found in the pcap net PMD build file, we
can move the checks to the top-level config directory and reference the
RTE_PCAP_PORT setting elsewhere in the build.
Bugzilla ID: 351
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Cristian Bidea <cristian.bidea@keysight.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Cristian Bidea <cristian.bidea@keysight.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
gcc 4.8.5 used on RHEL 7.6 can identify a Power 9 CPU but cannot generate
Power 9 code when the "-mcpu=native" command line argument is used. Test
whether the compiler can generate Power 9 code and adjust the machine
setting appropriately.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
CAAM JR can work on both LE and BE mode.
Latest platforms are in LE mode, so changing the
default mode to LE to make it more convenient for
the latest platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
RTE_EAL_ALLOW_INV_SOCKET_ID had been introduced and documented as used
with xen dom0 support (dropped for some time now).
Closely looking at this, the code was changed later and ensures that the
socket id is in the [0..RTE_MAX_NUMA_NODES] range anyway.
Let's drop this dead code and the build option with it.
Fixes: 94ef296414 ("eal/linux: fix numa node detection")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the implementation of the 128-bit atomic compare
exchange API on aarch64. Using 64-bit 'ldxp/stxp' instructions
can perform this operation. Moreover, on the LSE atomic extension
accelerated platforms, it is implemented by 'casp' instructions for
better performance.
Since the '__ARM_FEATURE_ATOMICS' flag only supports GCC-9, this
patch adds a new config flag 'RTE_ARM_FEATURE_ATOMICS' to enable
the 'cas' version on older version compilers.
For octeontx2, we make sure that the lse (and other) extensions are
enabled even if the compiler does not know of the octeontx2 target
cpu.
Since direct x0 register used in the code and cas_op_name() and
rte_atomic128_cmp_exchange() is inline function, based on parent
function load, it may corrupt x0 register aka break aarch64 ABI.
Define CAS operations as rte_noinline functions to avoid an ABI
break [1].
1: https://git.dpdk.org/dpdk/commit/?id=5b40ec6b9662
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
A while ago telemetry was added in 57ae0ec6 and it also added as-needed
to config/meson.build. This seems no more needed these days as due to other
build changes the ordering in buildlogs is:
[...] -lrte_telemetry [...] -Wl,--no-as-needed [...]
Which means telemetry no more benefits from --no-as-needed anyway.
Overlinking problems get triggered by the meson generated pkgconfig which
will have:
[...] -Wl,--no-as-needed <somelibsusedbydpdk>
This will overlink <somelibs> and in addition anything that follows
as it also doesn't wrap back to --as-needed. So if a projects includes
dpdk libs + <other> it will also consider <other> with --no-as-needed.
Ubuntu bug: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1841759
Fixes: 57ae0ec626 ("build: add dependency on telemetry to apps with meson")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time flags and use dynamic logging for debug prints.
Also remove rarely used debug logs in register access and datapath.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since gcc-8.3(I tried 8.3 and 9.1), the meson build failed on ThunderX2.
It got the following compiling errors:
/usr/lib/gcc/aarch64-linux-gnu/9/include/arm_neon.h:26493:1: error:
inlining failed in call to always_inline ‘vmull_p64’:
target specific option mismatch 26493 | vmull_p64 (poly64_t a, poly64_t b)
Fixes: 7286c9d723 ("config: add thunderx2 machine")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Jingzhao Ni <jingzhao.ni@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Setting RTE_MAX_LCORE to reflect the largest available configuration.
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
DEBUG_DUMP_DESC flag is commented out in IAVF Makefile and to enable
it user needs to edit the Makefile. It is felt that this method is not
good. Hence removing this flag from IAVF makefile and adding a flag
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC to config/common_base.
Signed-off-by: Lavanya Govindarajan <lavanyax.govindarajan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
