If call ice_flow_rem_entry() directly without checking entry_id, may
cause an ACL flow entry to be freed more than once.
This patch tries to find entry_id first, then call ice_flow_rem_entry()
to avoid the defect.
Fixes: 40d466fa9f ("net/ice: support ACL filter in DCF")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Simei Su <simei.su@intel.com>
There is currently a scenario test, which will continuously obtain port
statistics, causing the CPU usage to soar, which does not meet the
demand. After positioning analysis, it is found that the VF and PF
command interaction is completed through the iavf_execute_vf_cmd
function.
After the message is sent, it needs to wait for the interrupt thread to
obtain the response from the PF. For the data, the rte_delay_ms
interface is used here to wait, but the CPU will not be released during
the waiting period of this interface, which will cause the statistics to
keep occupying the CPU. This is also the root cause of the soaring CPU.
The command interaction should belong to the control plane, and there
will not be too high requirements for performance. It is recommended to
wait for the interface iavf_msec_delay to complete without taking up the
CPU time.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The macros PMD_*_LOG already include the line feed character.
Redundant \n are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Report max/min/align Tx descriptors limits in device info get callback.
Before calling the callback, rte_eth_dev_info_get() provides
default values of nb_min as zero and nb_max as UINT16_MAX that are
not correct for the driver, so one can't rely on them.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
According to virtio spec, the device MUST reset when 0 is written to
device_status, and present 0 in device_status once reset is done.
This patch waits status value to be 0 during reset operation, if
timeout in 3 seconds, log and continue.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Free Tx completed mbufs on device stop. Not completed Tx mbufs cannot be
freed since they are still in use.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There is a family of cleanup from completed transmits functions.
Fix packed virtqueues cleanup functions to have the same signature
as split virtqueues have. This lets all functions of the family to
match the same callback prototype.
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
- Enable IAVF PMD build on Windows
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types
- Fix for pointer and integer sign warnings using Clang compiler on
Windows
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
We should eliminate the timestamp status from the packet
status. This should only matter if timestamping is enabled
on the socket, but we might hit a kernel bug, which is fixed
in newer releases.
For interfaces of type 'veth', the sent skb is forwarded
to the peer and back into the network stack which timestamps
it on the RX path if timestamping is enabled globally
(which happens if any socket enables timestamping).
When the skb is destructed, tpacket_destruct_skb() is called
and it calls __packet_set_timestamp() which doesn't check
the flags on the socket and returns the timestamp if it is
set in the skb (and for veth it is, as mentioned above).
See the following kernel commit for reference [1]:
net: packetmmap: fix only tx timestamp on request
The packetmmap tx ring should only return timestamps if requested
via setsockopt PACKET_TIMESTAMP, as documented. This allows
compatibility with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.
[1] https://www.spinics.net/lists/kernel/msg3959391.html
Signed-off-by: Mihai Pogonaru <pogonarumihai@gmail.com>
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This updates the gtp_psc flow item to use the net header
definition of the gtp_psc to be based on RFC 38415-g30
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, TX functions call rte_pktmbuf_is_contiguous to determine
whether an mbuf is chained. However, rte_pktmbuf_is_contiguous is
designed to work on the first mbuf of a packet only. In case a packet
contains three or more segment mbufs in a chain, it may cause truncated
packets or rte_mbuf_sanity_check panics.
This patch updates TX functions to determine chained mbufs using
mbuf_head->nb_segs field, which works in all cases. Moreover, it
maintains that the second cacheline is only accessed when chained mbuf
is actually present.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Fixes: 43b815d881 ("net/memif: support zero-copy slave")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
Shared RSS resources were released before checking that the shared RSS
has no more references. If it had, the destruction was aborted, leaving
the shared RSS in an invalid state where it could no longer be used.
Move reference counter check before resource release.
Fixes: d2046c09aa ("net/mlx5: support shared action for RSS")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When an indirect action is used in a flow rule with a pattern that
causes RSS expansion, each device flow generated by the expansion
incremented the reference counter of the action. When such a flow was
destroyed, its action reference counter had been decremented only once.
The action remained marked as being used and could not be destroyed.
COUNT, AGE, and CONNTRACK indirect actions have been affected
(for AGE the error was not immediately observable).
Increment action counter only once for the original flow rule.
Fixes: 81073e1f8c ("net/mlx5: support shared age action")
Fixes: 2d084f69aa ("net/mlx5: add translation of connection tracking action")
Fixes: f3191849f2 ("net/mlx5: support flow count action handle")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When an indirect CT action of mlx5 PMD could not be destroyed,
rte_action_handle_destroy() was returning (-1), but the error
structure was not filled. This lead to a segfault in testpmd
on an attempt to print it. Fill the details for each possible
cause of this error.
Fixes: c5a49265fc ("net/mlx5: add ASO connection tracking destroy")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In order to allow/disallow configuring rules with identical patterns,
the new device argument 'allow_duplicate_pattern' was introduced.
The default is to allow, and it is initialized to 1 in PCI probe
function.
However, on auxiliary bus probing (for Sub-Function) it is not
initialized at all, so it's actually initialized to 0.
Move the initialization to default config function which is called from
both.
Fixes: 919488fbfa ("net/mlx5: support Sub-Function")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
During PCI probe, the internal probe function is called per PF.
If one of them fails, it was missing a proper destroy for the previously
probed PFs.
This fixes the behavior by destroying all previously probed PFs.
Fixes: 08c2772fc7 ("net/mlx5: support list of representor PF")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In shared device context creation, there is a missing validation when
one of the btree memory allocation fails that will cause a memory leak.
This adds a proper check to clean resources in case of failure.
Fixes: 632f0f1905 ("net/mlx5: manage shared counters in three-level table")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
1. Added support to specify l4 port masks in the template. Also enabled
source mac in the wild card key for ingress flows.
2. Added support to enable offload for ipv6 traffic within the vxlan
tunnel connection.
3. The flow counters is reduced from 7168 to 6912 for Whitney.
The stats operation is updated to reflect counts for packets
at egress from CFA instead of ingress to CFA
4. The miss path for the l2 context table is updated with correct
parif and default action handler to handle the miss path for
egress flows.
5. This support enables allocation of encapsulation, modification and
action records dynamically based on a given flow actions.
6. Reduce the l2context resource requests during open_session. Move the
SMAC from the L2Context to the EM/WM
7. Remap the parif in the bd action in order to eliminate incorrect
replication of broadcast packets. The layer 4 source port mask
was incorrectly updated in the outer layer 4 source port mask
instead of inner layer 4. Add the l3 proto to egress rules, switch
to using computed fields for l4 ports, add internal smac to f1/f2
flows, add l3 proto to ingress ipv6 flows
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix shared session support issues due to SRAM manager
additions. Shared session does not support slices within
RM blocks. Calculate resources required without slices
and determine base addresses using old methods for the
shared session.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The dynamic pool allocation defrag function currently uses stack
allocation. To improve use of stack space, dynamically allocate
and deallocate memory for use to defragment the dynamic pool of
EM resources.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Adjust info message to debug level to prevent excessive
logging.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add support for egress flows with port and count action for
Thor platform.
2. Added templates to support VXLAN encapsulation feature for Thor.
3. Added support for VXLAN decap and VLAN pop actions along with
the ingress flow.
4. Added templates to enable VXLAN decap support for f1 and f2 flows.
5. Added templates Thor VF Rep support
6. Added Thor ingress mod table actions for NAT, NAPT, and TTL.
7. Added mirror/sample table support
8. Added supported for IPv6 flows for Thor.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The wild card TCAM for Thor platform is different from the profile TCAM
byte order.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The encapsulation record processing is enhanced to handle data
dynamically. Different combinations of VXLAN encapsulation using
no VLAN or single or double VLAN can be supported and also supports
both IPv4 and IPv6 versions.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for tunnel offload APIs. Specifically the following
are supported.
tunnel_decap_set, tunnel_match, tunnel_action_decap_release,
tunnel_item_release.
This provides support for VXLAN decap action where two flows
can indicate tunnel offload rule. The first flow indicates the
tunnel properties and second flow indicates the inner packet
structure. The templates are updated to support this
feature.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Template adds non-VFR based support for testpmd with:
matches to include
- DMAC, SIP, DIP, Proto, Sport, Dport
- SIP, DIP, Proto, Sport, Dport
actions:
- count, drop
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The SRAM manager supports allocation and free of variable sized
records within SRAM memory. These record sizes are 8, 16, 32, or
64B. The SRAM manager algorithm will not fragment memory during
run time. Previous implementation only included fixed size 64B
records regardless of the size required.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds flow meter drop counter support for Thor.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the TruFlow core index table and
remove unused shadow table functionality.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue has been observed where fields of indirect buffers are
accessed after being set free by the diver. Also fixing freeing
of direct buffers to correct aura.
Fixes: 5cbe184802 ("net/octeontx: support fast mbuf free")
Cc: stable@dpdk.org
Signed-off-by: David George <david.george@sophos.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Lower values denote higher priority with 0 as the maximum.
The usage of priority in non-pipeline mode is wrong.
This patch fixed this issue in switch filter and added input
validation of priority in FDIR, RSS and ACL filter which
only support one priority level.
Fixes: 2321e34c23 ("net/ice: support flow priority for DCF switch filter")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For VF hosted by Intel 700 series NICs, internal Rx interrupt and adminq
interrupt share the same source, that cause a lot CPU cycles be wasted on
interrupt handler on Rx path.
The patch disable PCI interrupt and remove the interrupt handler, replace
it with a low frequency(50ms) interrupt polling daemon which is
implemented by registering an alarm callback periodically.
The virtual channel capability bit VIRTCHNL_VF_OFFLOAD_WB_ON_ITR can be
used to negotiate if iavf PMD needs to enable background alarm or not, so
ideally this change will not impact the case hosted by Intel 800 series
NICS.
This patch implements the same logic with an early i40e commit:
commit 864a800d70 ("net/i40e: remove VF interrupt handler")
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To support independent IP fragment default RSS, considerable
additional work need to be done, so we decide to remove this
feature to avoid some unexpected behavior we have observed,
meanwhile user always can use rte_flow to create RSS for IP
fragment packet explicitly.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To support independent IP fragment default RSS, considerable
additional work need to be done, so we decide to remove this
feature to avoid some unexpected behavior we have observed,
meanwhile user always can use rte_flow to create RSS for IP
fragment packet explicitly.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the iavf_dev_rx_queue_start function, if the iavf_switch_queue
or iavf_switch_queue_lv function fails, the previously applied mbuf
is not released, resulting in leakage. The patch fixes the problem.
Fixes: 9cf9c02bf6 ("net/iavf: add enable/disable queues for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
signal outputs via SDP[20:23], which is measured by an oscilloscope.
This feature can be turned by a devargs which can select GPIO pin index
flexibly. Pin index 0 means SDP20, pin index 1 means SDP21 and so on.
The example for test command is as below:
./build/app/dpdk-testpmd -a af:00.0,pps_out='[pin:2]' -c f -n 4 -- -i
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add API ice_parser_profile_init to init a parser profile base on
a parser result and a mask buffer. The ice_parser_profile can feed to
low level FXP engine to create HW profile / field vector directly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Implement function ice_parser_rt_execute which perform the main
loop of the parser.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add internal helper function ice_xlt_kb_flg_get to aggregate 64 bit
packet flag into 16 bit key builder flags.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
