Flow control was not documented as a supported feature
since the first fill of features matrix for mlx drivers.
Flow API and CRC offload flag support in mlx4 were missing in the
feature matrix when they were implemented (see below commits).
Fixes: 46d5736a7049 ("net/mlx4: support basic flow items and actions")
Fixes: ce07b1514d59 ("net/mlx4: fix CRC stripping capability report")
Fixes: e86b85ca757b ("doc: fill nics features matrix for mlx")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
When LRO offload is configured in Rx queue, the HW may coalesce TCP
packets from same TCP connection into single packet.
In this case the SW should fix the relevant packet headers because
the HW doesn't update them according to the new created packet
characteristics but provides the update values in the CQE.
Add update header code to the regular Rx burst function to support LRO
feature.
Make sure the first mbuf has enough space to include each TCP header,
otherwise the header update may cross mbufs what complicates the
operation too match.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Patch [1] zeroes the mbuf headroom when the port is configured with LRO
because when working with more than one stride per packet the HW cannot
guaranty an headroom in the start stride of each packet.
Change the solution to support mbuf headroom by adding an empty buffer
as the first packet segment, scatter mode must be enabled to support it.
[1] http://patches.dpdk.org/patch/56912/
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Fix license from BSD-2-Clause to BSD-3-Clause since the file was
lost on the driver license change.
Bump copyright year.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding support to parse GRE KEY for octeontx2 Flow.
Matching on GRE Key will only work, if checksum and routing
bits in the GRE header are equal to 0.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LRO packet may consume all the stride memory, hence the PMD cannot
guaranty head-room for the LRO mbuf.
The issue is lack in HW support to write the packet in offset from the
stride start.
A new striding RQ feature may be added in CX6 DX to allow head-room and
tail-room for the LRO strides.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use DevX API to read device LRO capabilities.
Check if LRO is supported and can be enabled.
Check if MPRQ is supported and can be used.
Enable MPRQ for LRO use if not enabled by user.
Added note for mlx5_mprq_enabled(), to emphasize that LRO
enables MPRQ.
Disable CQE compression and CRC stripping if LRO is enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add command-line argument to set LRO session timeout.
Add LRO settings struct in PMD configuration struct.
Add support of LRO offload in port configuration.
Add macros and function to check if LRO is supported and enabled.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch introduces new mlx5 PMD devarg options:
- txq_inline_min - specifies minimal amount of data to be inlined into
WQE during Tx operations. NICs may require this minimal data amount
to operate correctly. The exact value may depend on NIC operation
mode, requested offloads, etc.
- txq_inline_max - specifies the maximal packet length to be completely
inlined into WQE Ethernet Segment for ordinary SEND method. If packet
is larger the specified value, the packet data won't be copied by the
driver at all, data buffer is addressed with a pointer. If packet
length is less or equal all packet data will be copied into WQE.
- txq_inline_mpw - specifies the maximal packet length to be completely
inlined into WQE for Enhanced MPW method.
Driver documentation is also updated.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes the existing Tx datapath code
as preparation step before introducing the new
implementation. The following entities are being
removed:
- deprecated devargs support
- tx_burst() routines
- related PRM definitions
- SQ configuration code
- Tx routine selection code
- incompatible Tx completion code
The following devargs are deprecated and ignored:
- "txq_inline" is going to be converted to "txq_inline_max"
for compatibility issue
- "tx_vec_en"
- "txqs_max_vec"
- "txq_mpw_hdr_dseg_en"
- "txq_max_inline_len" is going to be converted
to "txq_inline_mpw" for compatibility issue
The deprecated devarg keys are recognized by PMD
and ignored/converted to the new ones in order not
to block device probing.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Adding support for ipv6_ext header parsing in the octeontx2 flow.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Previously in the PCAP PMD queues has to be defined as RxQ and TxQ
pairs, even if the need is only Rx or only Tx:
"--vdev net_pcap0,tx_pcap=tx.pcap,rx_pcap=rx.pcap"
Following commit enabled only providing Rx queue, and if Tx queue is
not provided PMD drops the Tx packets automatically:
Commit a3f5252e5cbd ("net/pcap: enable infinitely Rx a pcap file")
"--vdev net_pcap0,rx_pcap=rx.pcap"
This commit enables same thing for Rx queue, user no more have to
provide a Rx queue (rx_iface or rx_pcap), for this case a dummy Rx
burst function is used which doesn't return any packet at all:
"--vdev net_pcap0,tx_pcap=tx.pcap"
This makes only saving packets to a pcap file use case easy.
When both Rx and Tx queues are missing PMD will return an error.
(Single interface is still supported: "--vdev net_pcap0,iface=eth0")
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabled IP-in-IP tunnel type support on DV/DR flow engine.
This includes the following combination:
- IPv4 over IPv4
- IPv4 over IPv6
- IPv6 over IPv4
- IPv6 over IPv6
MLX5 NIC supports IP-in-IP tunnel via FLEX Parser so
need to make sure fw using FLEX Paser profile 0.
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=0
The example testpmd commands would be:
- Match on IPv4 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x04 /
ipv4 / udp / end actions rss level 2 queues 0 1 2 3 end / end
- Match on IPv6 over IPv4 packets and do inner RSS:
testpmd> flow create 0 ingress pattern eth / ipv4 proto is 0x29 /
ipv6 / udp / end actions rss level 2 queues 0 1 2 3 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
queue= parameter does not exist.
It might have been the previous name of the queue_count parameter, but
anyway, the default value 1 for the number of queues works fine.
Fixes: f1debd77efaf ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
When OS package is not provided driver silently goes into safe mode,
since safe mode is missing most of advanced features, this may confuse
the users.
Instead of going into safe mode silently, add devarg for safe mode
enabling only for users that are asking for it.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Remove devarg "max_queue_pair_num" related code since
it is not complete implemented.
Fixes: f9cf4f864150 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adding PF and VF action support for octeontx2 flow driver.
If RTE_FLOW_ACTION_TYPE_PF action is set from VF, then the packet
will be sent to the parent PF.
If RTE_FLOW_ACTION_TYPE_VF action is set and original is specified,
then the packet will be sent to the original VF, otherwise the packet
will be sent to the VF specified in the vf_id.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
On DV/DR flow engine, MLX5 can match on ICMP/ICMP6's code and type field
via FLEX Parser, which can be enabled by config FW using FLEX Parser
profile 2:
mlxconfig -d <mst device> -y set FLEX_PARSER_PROFILE_ENABLE=2
The testpmd commands could be:
testpmd> flow create 0 ingress pattern eth / ipv4 /
icmp type is 8 code is 0 / end
actions rss queues 0 1 end / end
testpmd> flow create 0 ingress pattern eth / ipv6 /
icmp6 type is 128 code is 0 / end
actions rss queues 0 1 end / end
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
some time).
- Fixed broken links.
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add remaining PTP configuration/slowpath operations.
Timesync feature is available only for PF devices.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Zyta Szpak <zyta@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add flow control operations and exposed
otx2_nix_update_flow_ctrl_mode() to enable on the
configured mode in dev_start().
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add Rx and Tx queue descriptor related operations.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
The fields from CQE needs to be converted to
ptype and rx ol flags in mbuf. This patch adds
create lookup memory for those items to be
used in Fastpath.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Add queue start and stop operations. Tx queue needs
to update the flow control value, Which will be
added in sub subsequent patch.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add RSS support and expose RSS related functions
to implement RSS action for rte_flow driver.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add unicast MAC filter for PF device and
update the respective feature list.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add promiscuous and allmulticast mode for PF devices and
update the respective feature list.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add basic stat operation and updated the feature list.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add link stats related operations and mark respective
items in the documentation.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add register dump support and mark Registers dump in features.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
