Secondary process depends on the vector offload flag to select right
Rx offload path. This patch adds a variable in share memory to store
the vector offload flag that can be directly read by secondary process.
Fixes: 808a17b3c1 ("net/ice: add Rx AVX512 offload path")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Qin Sun <qinx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Just fix the wrong defines of GTPU flags between UL and DL. These two
are defined are misplaced to each other.
Fixes: 8ebb93942b ("net/ice/base: add function to set HW profile for raw flow")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes coverity issue by directly passing the address
of the meta data to subfunction.
Coverity issue: 373867
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCF tries to handle AdminQ when DCF is reset by PF, however the invalid
data may be returned, and error log may be output in this situation.
This patch stops handling AdminQ when a passive reset is detected to
avoid this situation.
Fixes: 7564d55096 ("net/ice: add DCF hardware initialization")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
It's possible that a switch rule can't be redirect successfully due
to kernel driver is busy to handle an ongoing VF reset, so the
redirect action need to be deferred into next redirect request which
is promised by kernel driver after VF reset done.
This patch uses the saved flow rule's data to replay switch rule
remove/add during next flow redirect.
Fixes: 397b4b3c50 ("net/ice: enable flow redirect on switch")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The VSI number, lookup elements and rule information for creating switch
filter are abandoned when switch filter is created in original
implementation.
This patch saved the abandoned data in RTE flow, it is for future
use on replay when handling exception at flow redirect.
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The order of flow filter parser list was not definite and
linked to the register order of parsers. It caused ACL filter
covered by switch filter in some cases.
This patch fixed order of parser list to guarantee the usage
of each filter. Below lists the order.
ACL filter > Switch filter > FDIR > Hash filter.
Fixes: e4a0a7599d ("net/ice: fix flow priority support in non-pipeline mode")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable protocol agnostic flow offloading to support raw pattern input
for RSS hash flow rule creation. It is based on Parser Library feature.
Current rte_flow raw API is utilized.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Based on the parser library, we can directly set HW profile and
associate VSI for RSS raw flows. Add symmetric hash configuration
for raw flow.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Protocol agnostic flow offloading in Flow Director is enabled by this
patch based on the Parser Library, using existing rte_flow raw API.
Note that the raw flow requires:
1. byte string of raw target packet bits.
2. byte string of mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Also update the ice feature list with rte_flow item raw.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Based on the parser library, we can directly set HW profile and
associate the main/ctrl vsi.
This patch set also updated the base code BSD release version.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In this patch, we introduced a new parameter to enable/disable the
FDIR SWAP option by setting the swap and inset register set with
certain values.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.
For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In Rx data path, it reads hardware registers per packet, resulting in
big performance drop. This patch improves performance from two aspects:
(1) replace per packet hardware register read by per burst.
(2) reduce hardware register read time from 3 to 2 when the low value of
time is not close to overflow.
Meanwhile, this patch refines "ice_timesync_read_rx_timestamp" and
"ice_timesync_read_tx_timestamp" API in which
"ice_tstamp_convert_32b_64b" is also used.
Fixes: 953e74e6b7 ("net/ice: enable Rx timestamp on flex descriptor")
Fixes: 646dcbe6c7 ("net/ice: support IEEE 1588 PTP")
Suggested-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
After DCF is reset by PF, the VSI update service is unable to be
completed since the DCF resource is invalid.
This patch removes the call to service that updates VSI since it is
useless and output too many error messages.
Fixes: c7e1a1a3bf ("net/ice: refactor DCF VLAN handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch uses the index value to call the function, instead of the
function pointer assignment to save the selection of Receive Flex
Descriptor profile ID.
Otherwise the secondary process will run with wrong function address
from primary process.
Fixes: 7a340b0b4e ("net/ice: refactor Rx FlexiMD handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
After DCF is reset by PF, the DCF device un-initialization cannot
function normally, ignore the failure does not help since the kernel
does not clean up resource.
The patch workaround the issue by triggering an additional DCF enable/
disable cycle when a passive reset is detected.
Fixes: 1a86f4dbdf ("net/ice: support DCF device reset")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
After DEV_RX_OFFLOAD_JUMBO_FRAME flag removed, drivers give jumbo frame
decisions based on MTU value checks, but some of the checks were wrong
by mistake, causing device initialization to fail, fixing them.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
After DCF commits TM hierarchy configuration, the commit flag is set to
avoid duplicated commit. But the flag is not reset after device stop,
which prevents the update of hierarchy configuration unless close the
device. It is not reasonable. This patch fix to reset the commit flag
after device stop. Then users can delete and add nodes to commit a new
TM hierarchy configuration.
Fixes: 3a6bfc37ea ("net/ice: support QoS config VF bandwidth in DCF")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Sideband queue need to be initialized when device is initialized.
Otherwise the calling to function "ice_init_ctrlq" may fail.
This patch fixes it.
Fixes: 97f4f78bbd ("net/ice/base: add functions for device clock control")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The common header file for vectorization is included in multiple files,
and so must use macros for the current compilation unit, rather than the
compiler-capability flag set for the whole driver. With the current,
incorrect, macro, the AVX512 or AVX2 flags may be set when compiling up
SSE code, leading to compilation errors. Changing from "CC_AVX*_SUPPORT"
to the compiler-defined "__AVX*__" macros fixes this issue. In addition,
splitting AVX-specific code into the new ice_rxtx_common_avx.h header
file to avoid such bugs.
Bugzilla ID: 788
Fixes: a4e480de26 ("net/ice: optimize Tx by using AVX512")
Fixes: 20daa1c978 ("net/ice: fix crash in AVX512")
Cc: stable@dpdk.org
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
This patch fixes coverity issue by avoiding use of null pointer
in taking false branch.
Coverity issue: 373360
Fixes: 437dbd2fd4 ("net/ice: support 1PPS")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In function ice_dcf_stop_queues(), RX queues and TX queues are actually
not freed, so their pointers shall not be set to NULL when queues are
stopped.
This patch adds function call to free queues on DCF device close,
which also set the RX and TX queues' pointers to NULL on freeing
queues, and avoids referring to the released resource when device is
started again.
Fixes: 1a86f4dbdf ("net/ice: support DCF device reset")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If flow redirect failed, the spinlock will not be unlocked.
This patch fixes it.
Fixes: bc9201388d ("net/ice: support flow redirect")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The Timestamp Overlay feature is available only in 32B Flex Descriptors.
This patch adds compile option when in 16B Flex Descriptors.
Fixes: 953e74e6b7 ("net/ice: enable Rx timestamp on flex descriptor")
Fixes: 646dcbe6c7 ("net/ice: support IEEE 1588 PTP")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Null-checking "p" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check. Thus correct
the code lines and remove the redundant line.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adjust the code line order of the parser runtime reset, since the
struct rt->psr is used in function _rt_flag_set before assignment.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The patch is required for all PMDs which do not provide representors
info on the representor itself.
The function, rte_eth_representor_id_get(), is used in
eth_representor_cmp() which is required in ethdev class iterator to
search ethdev port ID by name (representor case). Before the patch
the function is called on the representor itself and tries to get
representors info to match.
Search of port ID by name is used after hotplug to find out port ID
of the just plugged device.
Getting a list of representors from a representor does not make sense.
Instead, a backer device should be used.
To this end, extend the rte_eth_dev_data structure to include the port ID
of the backing device for representors.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>ice_rx_queue_release
rte_eth_dev_close
-->ice_dev_close
---->ice_free_queues
------>ice_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Code changes done for build issue as reported in Bug 817
error: dereferencing type-punned pointer will break strict-aliasing rules.
added union to avoid pointer dereferencing
The build issue has been reported with both gcc 4.8.5 (RHEL 7) and
gcc 5.4.0 (Ubuntu 16.04).
Bugzilla ID: 817
Fixes: 39925373a3 ("net/ice/base: add parser execution main loop")
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The request of getting VF VSI map request may fail when DCF is busy,
this patch adds retry mechanism to make it able to succeed.
Fixes: b09d34ac85 ("net/ice: fix flow redirector")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If call ice_flow_rem_entry() directly without checking entry_id, may
cause an ACL flow entry to be freed more than once.
This patch tries to find entry_id first, then call ice_flow_rem_entry()
to avoid the defect.
Fixes: 40d466fa9f ("net/ice: support ACL filter in DCF")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Simei Su <simei.su@intel.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
This updates the gtp_psc flow item to use the net header
definition of the gtp_psc to be based on RFC 38415-g30
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
