Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Since AARCH32 extension is not implemented on octeontx family, only
enable build for 64bit.
Due to Linux kernel AF(Admin function) driver dependency, only enable
build for 64-bit Linux.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add RTE_ prefix to internal API defined in public header.
Use the prefix instead of double underscore.
Use uppercase for macros in the case of name conflict.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Issue has been observed where fields of indirect buffers are
accessed after being set free by the diver. Also fixing freeing
of direct buffers to correct aura.
Fixes: 5cbe184802 ("net/octeontx: support fast mbuf free")
Cc: stable@dpdk.org
Signed-off-by: David George <david.george@sophos.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since meson 0.59.0 version, the extract_all_objects() API
need to pass explicit boolean value.
To remove the following warning[1], added explicit `true` for
extract_all_objects() use in codebase whever there is
no argument.
[1]
WARNING: extract_all_objects called without setting recursive
keyword argument. Meson currently defaults to
non-recursive to maintain backward compatibility but
the default will be changed in the future.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Remove conflicting declaration of this symbol.
Fixes: d0d6549860 ("net/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Maximum Rx packet length is getting updated twice which
corrupts actual value.
Fixes: 3151e6a687 ("net/octeontx: support MTU")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 3151e6a687 ("net/octeontx: support MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Allows i40e and mlx5 PMDs to compile on Windows and disable other drivers.
Disable few i40e warnings with Clang such as comparison of integers of
different signs and macro redefinitions.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Building with gcc 10.2 with SVE extension enabled got error:
{standard input}: Assembler messages:
{standard input}:91: Error: selected processor does not support `addvl x4,x8,#-1'
{standard input}:95: Error: selected processor does not support `ptrue p1.d,all'
{standard input}:135: Error: selected processor does not support `whilelo p2.d,xzr,x5'
{standard input}:137: Error: selected processor does not support `decb x1'
This is because inline assembly code explicitly resets cpu model to
not have SVE support. Thus SVE instructions generated by compiler
auto vectorization got rejected by assembler.
Added SVE to the cpu model specified by inline assembly for SVE support.
Not replacing the inline assembly with C atomics because the driver relies
on specific LSE instruction to interface to co-processor [1].
Fixes: f0c7bb1bf7 ("net/octeontx/base: add octeontx IO operations")
Cc: stable@dpdk.org
[1] https://mails.dpdk.org/archives/dev/2021-January/196092.html
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The flag RTE_ETH_DEV_CLOSE_REMOVE is set so all port resources
can be freed by rte_eth_dev_close().
The callback ".dev_close(port)" is called also
from the ".remove(device)" operation.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When building send command for a given descriptor it expects
it to contain the AURA identifier of the pool that it belongs
to rather than the pool identifier itself.
Fixes: 7f4116bdbb ("net/octeontx: add framework for Rx/Tx offloads")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This field was not generic as it was filled with PCI kernel drivers only.
It has no known in-tree user (and I could not find opensource projects
using it).
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e ("fm10k: update vlan offload features")
Fixes: fdba3bf15c ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d2 ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b09 ("nfp: add basic features")
Fixes: 56139e85ab ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081e ("net/octeontx2: support VLAN offloads")
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding support for rx checksum offload. In case of wrong
checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum. It also adds
rx burst function pointer hook for rx checksum offload to
event PMD.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding macro based framework to hook dequeue/enqueue function
pointers to the appropriate function based on rx/tx offloads.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When octeontx_create() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Fixes: 9e399b88ce ("net/octeontx: fix memory leak of MAC address table")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
This patch implements rx/tx checksum offload. In case of
wrong checksum received (inner/outer l3/l4) it reports the
corresponding layer which has bad checksum and also corrects
it if hw checksum is enabled on tx side.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Adding support for setting link up/down eth operation.
It is used to enable disable lmac. Also implemented a
poll function for getting the link status at regular
intervals.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Patch adds support for vlan filter offload support.
MBOX messages for vlan filter on/off and vlan filter
entry add/rm are added to configure PCAM entries to
filter out the vlan traffic on a given port.
Patch also defines rx_offload_flag for vlan filtering.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
