Add support for overwriting destination MAC addresses.
The new MAC address is written into a free entry in the
L2T table and the corresponding L2T index is used by
hardware to overwrite the destination MAC address of the
packets hitting the flow
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match all packets received on the underlying VF.
Use new firmware API to fetch the Virtual Interface Number (VIN)
allocated to each VF by the firmware. The VIN is required to
write filter rules to match all packets on VFs, whose identifier
is beyond max 7-bit value (i.e. 127) in VIID.
If firmware doesn't support fetching the VIN information, then
fallback to manually retrieving the VIN value from the 7-bit field
in the VIID, which only supports in range of 0..127. In this case,
packets belonging to VFs, whose identifier is beyond 127 can't be
matched.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match all packets received on the underlying PF
Note that the same 17-bit hardware tuple is shared between QinQ
and PF match. Hence, match on either QinQ or PF only can be done
at a time. Both QinQ and PF match can't be enabled at the same time.
Also, remove check to reject rules without spec because
RTE_FLOW_ITEM_TYPE_PF doesn't require a spec. Due to this check
removal, RTE_FLOW_ITEM_TYPE_PHY_PORT item needs to be updated to
handle NULL spec
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match Type of Service (TOS) field in
IPv4/IPv6 header
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match fields in 802.1ad Q-in-Q VLAN packets.
Relax check for repeated pattern items for RTE_FLOW_ITEM_TYPE_VLAN
item, since the same item is used to represent both QinQ and VLAN
packets.
When QinQ match is enabled, the ethertype field in the hardware
spec must contain the innermost VLAN header's ethertype field,
and not the Ethernet header's ethertype field. The hardware
automatically searches for ethertype 0x88A8/0x8100 in Ethernet
header, when parsing incoming packet against QinQ/VLAN pattern,
respectively.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Make user filters a priority in EF10 datapath. When a manual
filter with a specification that is equal to an existing auto
filter is inserted, the manual filter:
- replaces auto filter if the specification is exclusive;
- is inserted along existing auto filter otherwise;
In the first case the auto filter that was replaced is saved.
This saved filter can be updated on filter reconfiguration and
is restored on the manual filter removal.
Fixes: e7cd430c86 ("net/sfc/base: import SFN7xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The code is refactored to make it more clear and allow for
more convenient further changes.
Fixes: e7cd430c86 ("net/sfc/base: import SFN7xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The automatic filter priority may only be used by filter implementation,
so reject the attempts to create such filters by client drivers.
Fixes: f9565517ff ("net/sfc/base: import filters support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Only implemented filter priorities are manual and auto. Remove
unused priorities since exposing unimplemented functionality
is of no benefit.
Tx filter specification default priority is changed to manual,
since required priority does not differ from it in the implementation.
Fixes: f9565517ff ("net/sfc/base: import filters support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The priority should be explicitly set to manual for correct
usage of libefx filters.
Fixes: a9825ccf5b ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Returned errors of ethdev callbacks are negative. Internal
sfc functions return positive errors, so convert them to
negative value.
Fixes: 9039c81257 ("ethdev: change promiscuous callbacks to return status")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Minor spelling errors found by aspell and codespell
Fixes: 1daa338058 ("ethdev: validate offloads set by PMD")
Fixes: 81f9db8ecc ("ethdev: add vlan offload support")
Fixes: c8231c63dd ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Any DPDK public header file which includes stdbool.h may conflict with
local definition of bool, if any, which further results in compilation
error. To avoid, used standard stdbool.h instead of defining bool
internally.
I observed this issue during a development where I included rte_uuid.h
into rte_ethdev.h. As rte_ethdev.h is included to PMD driver, it started
throwing error as given below:
CC ionic_rxtx.o
In file included from .../dpdk/build/include/rte_uuid.h:17:0,
from .../dpdk/build/include/rte_ethdev.h:161,
from .../dpdk/build/include/rte_ethdev_driver.h:18,
from .../dpdk/drivers/net/ionic/ionic_rxtx.c:34:
.../dpdk/drivers/net/ionic/ionic_osdep.h:48:17:
error: two or more data types in declaration specifiers
typedef uint8_t bool;
^
In file included from .../dpdk/drivers/net/ionic/ionic_dev.h:8:0,
from .../dpdk/drivers/net/ionic/ionic.h:13,
from .../dpdk/drivers/net/ionic/ionic_mac_api.h:8,
from .../dpdk/drivers/net/ionic/ionic_rxtx.c:45:
.../dpdk/drivers/net/ionic/ionic_osdep.h:48:1:
warning: useless type name in empty declaration
typedef uint8_t bool;
^~~~~~~
cc1: warning: unrecognized command line option
‘-Wno-address-of-packed-member’
.../dpdk/mk/internal/rte.compile-pre.mk:114:
recipe for target 'ionic_rxtx.o' failed
Fixes: 5ef518098e ("net/ionic: register and initialize adapter")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Alfredo Cardigliano <cardigliano@ntop.org>
Currently, when promiscuous mode is enabled, it is just allowed to
accept all the unicast and broadcast packets in hns3 PF PMD driver. It
should also be able to receive multicast packets.
Fixes: 19a3ca4c99 ("net/hns3: add start/stop and configure operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds promiscuous and allmulticast mode support for hns3 VF
PMD driver.
1) The promiscuous/allmulticast mode can be configured successfully only
based on the trusted VF device. If based on the non trusted VF
device, configuring promiscuous/allmulticast mode will fail. The hns3
VF device can be configured as trusted device by hns3 PF kernel
ethdev driver on the host by "ip link set <eth num> vf <vf id> turst
on" command.
2) After the promiscuous mode is configured successfully, hns3 VF PMD
driver can receive the ingress and outgoing traffic. In the words,
all the ingress packets, all the packets sent from the PF and other
VFs on the same physical port.
3) Note: Because of the hardware constraints, By default vlan filter is
enabled and couldn't be turned off based on VF device, so vlan filter
is still effective even in promiscuous mode. If upper applications
don't call rte_eth_dev_vlan_filter API function to set vlan based on
VF device, hns3 VF PMD driver will can't receive the packets with
vlan tag in promiscuous mode.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The hns3 PF/VF devices on the same port share the hardware MTU
configuration. Currently, we send mailbox to inform hns3 PF kernel
ethdev driver to finish hardware MTU configuration in hns3 VF PMD
driver, there is no need to stop the port for hns3 VF device, and
the MTU value issued by hns3 VF PMD driver must be less than or
equal to PF's MTU.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when receiving and transmitting packets based on hns3 network
engine there are probably unexpected and redundant Tx interrupts if Rx
interrupt is enabled.
The root cause as below:
Tx and Rx queues with the same number share the interrupt vector in hns3
network engine, and in this case there are the residual hardware mapping
relationship configuration between queue and interrupt vector configured
in hns3 kernel ethdev driver.
We should clear the all hardware mapping relationship configurations in
the initialization. Because of the hardware constraints, we have to
implement clearing the relationship by binding all queues to the last
interrupt vector and reserving the last interrupt vector, this method
results in a decrease of the maximum queues when upper applications call
the rte_eth_dev_configure API function to enable Rx interrupt.
Fixes: 02a7b55657 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds TCP segment offload support for hns3 PMD driver.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_PFCP to flow API to
match a PFCP header.
Add sample PFCP rules for testpmd guide. Since Session Endpoint
Identifier (SEID) only will be present in PFCP Session header and PFCP
Session headers shall be identified when the S field is equal to 1, when
create rules for PFCP Session header with certain SEID the S field need
be set 1.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Remove function ice_clear_queues, since all equivalent code
has already been executed during ice_rx|tx_queue_stop.
Also function ice_rx|tx_queue_release_mbufs simply wrapped a
function pointer call which is not necessary, remove them.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
gcc 10.0.1 reports:
../drivers/net/hinic/base/hinic_pmd_hwdev.c: In function ‘print_cable_info’:
../drivers/net/hinic/base/hinic_pmd_hwdev.c:1398:3:
warning:
‘snprintf’ argument 4 may overlap destination object ‘tmp_str’
[-Wrestrict]
1398 | snprintf(tmp_str + strlen(tmp_str), (sizeof(tmp_str) - 1),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1399 | "%s, Temperature: %u", tmp_str,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1400 | info->cable_temp);
| ~~~~~~~~~~~~~~~~~
The warning is that tmp_str is in both src and dest.
Anyway, the current code is incorrect and because of the +strlen
the existing string will be repeated twice and max length
does not limit to the end of the string.
Fix by removing tmp_str from the src of snprintf and adding the
correct max length.
Fixes: d9ce191794 ("net/hinic/base: add hardware operation")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the situation when there is already connected pair of
memif interfaces and another slave tries to initiate the connection with
(already occupied) master. Expected behavior is that the second slave
is refused and gets disconnect message with reason: "Already connected",
while old connection remains functional.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Signed-off-by: Július Milan <jmilan.dev@gmail.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
With this patch it is possible to connect 2 DPDK memifs into loopback,
i.e. when they have the same id and different roles, as for example:
"--vdev=net_memif0,role=master,id=0"
"--vdev=net_memif1,role=slave,id=0"
Signed-off-by: Július Milan <jmilan.dev@gmail.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
When setting the CONFIG_RTE_BUILD_SHARED_LIB to y,
and build the mlx5 pmd, there is a building error.
To fix it, add RTE_IBVERBS_LINK_DLOPEN to include
relative codes.
mlx5_common.o: In function `mlx5_glue_init':
drivers/common/mlx5/mlx5_common.c:324: undefined reference to `dlclose'
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds to MLX5 PMD the support of matching on IPv4 TTL and
IPv6 hoplimit.
Support is valid when using DV flow engine (Verbs flow engine doesn't
support matching on this field).
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The nic_mask struct in function mlx5_flow_validate_item_ipv6()
includes hop_limits field.
This is redundant since matching on this item is not supported using
Verbs flow engine (dv_flow_en=0).
(Separate patch will be sent to handle this issue for DV flow engine.)
Setting a rule including match on this field will fail:
testpmd> flow create 0 ingress pattern eth / ipv6 hop is 1 / end actions
drop / end
port_flow_complain(): Caught PMD error type 1 (cause unspecified):
hardware refuses to create flow: Operation not supported
This patch removes the redundant field from nic_mask, to ensure that
such flow rules will be rejected by PMD validation:
testpmd> flow create 0 ingress pattern eth / ipv6 hop is 1 / end actions
drop / end
port_flow_complain(): Caught PMD error type 13 (specific pattern item):
cause: 0x7fffffffa2c8, mask enables non supported bits: Operation not
supported
The related lines in function flow_verbs_translate_item_ipv6() are
removed as well, since they are redundant.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:
1. A default Rx path can always be selected by setting a proper
rx_free_thresh value at runtime, see
ice_check_rx_burst_bulk_alloc_preconditions.
2. Its not a big deal to always reserve more space for desc ring.
"ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"
3. Fixes a potential invalid memory access in ice_reset_rx_queue.
If CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
ice_check_rx_burst_bulk_alloc_preconditions return fail.
Below code will have problem.
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This is needed to reuse pattern processing engine for MAE.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a preparation step, generalise flow start and stop path using
callbacks.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Generalise flow attribute parsing function in regard to transfer attribute.
Add a method table and factor out VNIC-specific parsing code as a callback.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead boards maintain support for MAE, a low-level Match-Action Engine.
The upcoming patches will bring support for MAE to RTE flow implementation.
A follow-up patch will introduce MAE-specific specification cleanup method.
In order to prepare for the patch, introduce flow allocation and free path.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add the concept of a flow specification type.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
A backend which a driver employs to handle flow rules of a given
type depends on the underlying NIC flow engine. The driver in
question in its current state is tailored to support the only
flow engine, VNIC filtering. As the need arises to add support
for transfer rules, the driver has to be reworked so that it
becomes possible to introduce yet another backend.
As a preparation step, make the flow list shared
between different engines.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The flow specification structure will be transformed to a generic one, and
its current contents will be fenced off to form a VNIC-specific parameters.
Flow RSS details do not belong to the said specification currently, albeit
being VNIC-specific. This patch addresses this issue as a preparation step.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement eth_dev_ops uc_hash_table_set and uc_all_hash_table_set
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Supports adding MAC addresses to enable whitelist filtering to
accept packets
implement eth_dev_ops mac_addr_set, mac_addr_add, mac_addr_remove and
set_mc_addr_list
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Stopping LLDP is necessary for DPDK, but it will cause DCB init failure.
For kernel shared code, the prerequisite for successful initialization
of DCB is that LLDP is enabled. This patch starts LLDP before DCB init
and stops it when init finishes.
Fixes: a8e84b22bd ("net/i40e/base: support persistent LLDP")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
NIC deinitialization should not happen after a failed NIC
initialization.
Fixes: 91831d4068 ("net/sfc: estimate available resources")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When calling to setup RSS on v4 API, ESX will expect
IPv4/6 TCP RSS to be set/requested mandatory.
This patch will:
- Set IPv4/6 TCP RSS when these have not been set. A warning
message is thrown to make sure we warn the application we are
setting IPv4/6 TCP RSS when not set.
- An additional check has been added to dodge RSS configuration
altogether unless MQ_RSS has been requested, similar to v3.
The alternative (returning error) was considered, the intent
is to ease the task of setting up and running vmxnet3 in situations
where it's supposed to be most straightforward (testpmd, pktgen).
Bugzilla ID: 400
Fixes: 643fba7707 ("net/vmxnet3: add v4 boot and guest UDP RSS config")
Cc: stable@dpdk.org
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Requested promiscuous or all-multicast mode may be dropped on port
start if FW denies to enable it (e.g. because of no permission
in the case of VF). Return applied value on get.
Fixes: f5258439ee ("net/sfc: avoid failure on port start if Rx mode is rejected")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Supporting more than 2 sub-device is a remnant from earlier fail-safe
design, that was never actually published.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Reading the fail-safe doc with a few years added, a few phrasing
choices are ambiguous or confusing.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Remove unnecessary variable "meta" in ice_flow_create and
ice_flow_validate, it should be defined when really needed:
its ice_parse_engine_create and ice_parse_engine_validate.
A meta data created by parser->parse_pattern_action should be
freed inside parser->engine->create.
During a validate operation, since parser->engine_>create will not
be invoked, it is unnecessary to create a meta during parser, so
NULL will passed to engine->parse_pattern_action and all parser's
parse_pattern_action need to be modified to handle meta = NULL
properly.
With above implementation, the patch also fixes a potential memory
leak in ice_parse_engine_validate, since meta may not be freed.
BTW, an engine without a create op should be regarded as a bug. So
use RTE_ASSERT to replace runtime engine->create == NULL check in
ice_parse_engine_create.
Fixes: 4e27d3ed02 ("net/ice: fix flow API framework")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
This was left to its default value. With the patch transactions are:
- coherent,
- do not allocate in downstream cache (there is none on LS1028a),
- merge surrounding data for BD writes,
- overwrite surrounding data for frame data writes.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
LS1028A does not have platform cache so any reads following a hardware
write will go directly to DDR. Latency of such a read is in excess of
100 core cycles, so try to prefetch more in advance to mitigate this.
How much is worth prefetching really depends on traffic conditions.
With congested Rx this could go up to 4 cache lines or so. But if
software keeps up with hardware and follows behind Rx PI by a cache line
then it's harmful in terms of performance to cache more. We would only
prefetch data that's yet to be written by ENETC, which will be evicted
again anyway.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Use rte_pktmbuf_free_bulk to release all mbufs at once. This is flagged
as obsolete/not yet stable in DPDK but seems to be functional.
Don't count the released frames, it's no longer needed in the caller.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Since we know in advance that we're going to fill in multiple
descriptors it's convenient to allocate the buffers in batches.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
