Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
As tap is a virtual device, there's no physical way a link can be cut.
However, it has an associated kernel netdevice and possibly a remote
netdevice too. These netdevices link status may change outside of the
DPDK scope, through an external command such as:
ip link set dev tapX down
This commit implements link status notification through netlink.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
By default, a tap netdevice is of no use when not fed by a separate
process. The ability to automatically feed it from another netdevice
allows applications to capture any kind of traffic normally destined to
the kernel stack.
This patch implements this ability through a new optional "remote"
parameter.
Packets matching filtering rules created with the flow API are matched
on the remote device and redirected to the tap PMD, where the relevant
action will be performed.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Supported flow rules are now mapped to TC rules on the tap netdevice.
The netlink message used for creating the TC rule is stored in struct
rte_flow. That way, by simply changing a metadata in it, we can require
for the rule deletion without further parsing.
Supported items:
- eth: src and dst (with variable masks), and eth_type (0xffff mask).
- vlan: vid, pcp, tpid, but not eid.
- ipv4/6: src and dst (with variable masks), and ip_proto (0xffff mask).
- udp/tcp: src and dst port (0xffff) mask.
Supported actions:
- DROP
- QUEUE
- PASSTHRU
It is generally not possible to provide a "last" item. However, if the
"last" item, once masked, is identical to the masked spec, then it is
supported.
Only IPv4/6 and MAC addresses can use a variable mask. All other
items need a full mask (exact match).
Support for VLAN requires kernel headers >= 4.9, checked using
auto-config.sh.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The flow API provides the ability to classify packets received by a tap
netdevice.
This patch only implements skeleton functions for flow API support, no
patterns are supported yet.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Tx datapath is bound to libefx control path, but
it should be possible to use other datapaths with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Rx datapath is bound to libefx control path, but
other datapaths should be possible to use with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enable Thunderx nicvf PMD driver in the common
config as it does not have build dependency
with any external library and/or architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
descriptor can carry multiple packets either by including pointers of
packets or by inlining packets. Inlining packet data can be helpful to
better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
mode - mixing inlined packets and pointers in a descriptor. This feature is
enabled by default if supported by HW.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
A tap netdevice does not support flow control; ensure nothing but
RTE_FC_NONE mode can be set.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A tap netdevice actually receives every packet, without any filtering
whatsoever. There is no need for any multicast address registration
to receive multicast packets.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The MTU is assigned to the tap netdevice according to the argument, but
packet transmission and reception just write/read on an fd with the
default limit being the socket buffer size.
As a new rte_eth_dev_data is allocated during tap device init, ensure it
is set again dev->data->mtu.
Once the actual netdevice is created via tun_alloc(), make sure to apply
the desired MTU to the netdevice.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As soon as the netdevice is created, update pmd->mac_addr with its
actual MAC address.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
The patch is to make MAC statistics update interval tunable
by means of 'stats_update_period_ms' kvarg parameter making
it possible to use values different from 1000 ms in case of
SFN8xxx boards provided that firmware version is 6.2.1.1033
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Support individual/group destination address match (unknown unicast
and all-multicast correspondingly in terms of firmware).
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of source and destination ports is supported by parser.
IP protocol match is enforced to UDP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of source and destination ports is supported by parser.
IP protocol match is enforced to TCP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of IP protocol, source and destination
addresses is supported by parser.
EtherType match is enforced to IPv6 EtherType.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of IP protocol, source and destination
addresses is supported by parser.
EtherType match is enforced to IPv4 EtherType.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of VLAN ID bits is supported only and required in VLAN item.
Mask to match VLAN ID bits only is required, default mask to match entire
TCI is not supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Only pattern items VOID, ETH and actions VOID, QUEUE is now
supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
With all vmxnet3 version 3 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 3, provided
the emulation advertises support for version 3.
This patch also updates release notes.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Acked-by: Jin Heo <heoj@vmware.com>
Prior to this commit Tx checksum offload was supported only for the
inner headers.
This commit adds support for the hardware to compute the checksum for the
outer headers as well.
The support is for tunneling protocols GRE and VXLAN.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
* Add link block check for KR.
* Complete HW initialization even if SFP is not present.
* Add VF xcast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables i40e driver in PowerPC along with its altivec
intrinsic support.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Yong Wang <yongwang@vmware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Fixes: 0ba3870e75 ("doc: add guide to use virtio-user as exceptional path")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the document with the available EAL command
line option to install the pmd drivers that are built
as shared libraries.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current device hotplug is just supported by UIO managed devices.
This patch adds same functionality with VFIO.
It has been validated through tests using IOMMU and also with
VFIO and no-iommu mode.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since there is no "descriptor done" flag like on Intel drivers, the
approach is different on mlx5 driver.
- for Tx, we call txq_complete() to free descriptors processed by
the hw, then we check if the descriptor is between tail and head
- for Rx, we need to browse the cqes, managing compressed ones,
to get the number of used descriptors.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce a new API to get the status of a descriptor.
For Rx, it is almost similar to rx_descriptor_done API, except it
differentiates "used" descriptors (which are hold by the driver and not
returned to the hardware).
For Tx, it is a new API.
The descriptor_done() API, and probably the rx_queue_count() API could
be replaced by this new API as soon as it is implemented on all PMDs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now that the enqueue function returns the amount of space in the ring,
we can use that to replace the old watermark functionality. Update the
example app to do so, and re-enable it in the examples Makefile.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The bulk fns for rings returns 0 for all elements enqueued and negative
for no space. Change that to make them consistent with the burst functions
in returning the number of elements enqueued/dequeued, i.e. 0 or N.
This change also allows the return value from enq/deq to be used directly
without a branch for error checking.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove the watermark support. A future commit will add support for having
enqueue functions return the amount of free space in the ring, which will
allow applications to implement their own watermark checks, while also
being more useful to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There was a compile time setting to enable a ring to yield when
it entered a loop in mp or mc rings waiting for the tail pointer update.
Build time settings are not recommended for enabling/disabling features,
and since this was off by default, remove it completely. If needed, a
runtime enabled equivalent can be used.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The debug option only provided statistics to the user, most of
which could be tracked by the application itself. Remove this as a
compile time option, and feature, simplifying the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Users compiling DPDK should not need to know or care about the arrangement
of cachelines in the rte_ring structure. Therefore just remove the build
option and set the structures to be always split. On platforms with 64B
cachelines, for improved performance use 128B rather than 64B alignment
since it stops the producer and consumer data being on adjacent cachelines.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Changes in the thread layout described, with an updated diagram.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add support to the vHostdriver for the new API to force free consumed
buffers on Tx ring. vHost does not cache the mbufs so there is no work
to do.
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Add support to the e1000 igb driver for the new API to force free
consumed buffers on Tx ring. This API is independent of the tx_rs_thresh
setting. With this API, buffers should be free even if tx_rs_thresh is
not met.
e1000 igb driver does not implement a tx_rs_thresh to free mbufs, it
frees a slot in the ring as needed. However, it could be implemented at
some future date.
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Add a new API to force free consumed buffers on Tx ring. API will return
the number of packets freed (0-n) or error code if feature not supported
(-ENOTSUP) or input invalid (-ENODEV).
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Downstreams might want to provide different DPDK releases at the same
time to support multiple consumers of DPDK linked against older and newer
sonames.
Also due to the interdependencies that DPDK libraries can have applications
might end up with an executable space in which multiple versions of a
library are mapped by ld.so.
Think of LibA that got an ABI bump and LibB that did not get an ABI bump
but is depending on LibA.
Application
\-> LibA.old
\-> LibB.new -> LibA.new
That is a conflict which can be avoided by setting CONFIG_RTE_MAJOR_ABI.
If set CONFIG_RTE_MAJOR_ABI overwrites any LIBABIVER value.
An example might be ``CONFIG_RTE_MAJOR_ABI=16.11`` which will make all
libraries librte<?>.so.16.11 instead of librte<?>.so.<LIBABIVER>.
We need to cut arbitrary long stings after the .so now and this would work
for any ABI version in LIBABIVER:
$(Q)ln -s -f $< $(patsubst %.$(LIBABIVER),%,$@)
But using the following instead additionally allows to simplify the Make
File for the CONFIG_RTE_NEXT_ABI case.
$(Q)ln -s -f $< $(shell echo $@ | sed 's/\.so.*/.so/')
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Jan Blunck <jblunck@infradead.org>
This patch extend next_hop field from 8-bits to 21-bits in LPM library
for IPv6.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add to the contributors guide the requirements and guidelines for
getting patches acked and merged. It details at what point the review
comments and the ack's need to be received in order to have a given
patch merged into a release.
These guidelines are as agreed by the DPDK technical board at the
meeting held on 2017-02-15.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The variables DESTDIR and prefix are used with "make install"
to copy the files in $DESTDIR$prefix.
Their default values will be shown when calling "make help".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Every cells of a driver column are painted in yellow.
The trick is to generate some empty content as a big column
above and below the pointed cell.
The position: relative attribute is used for the highlight position
but it makes the border to disappear.
The overflow: hidden attribute is used to mask the generated content
outside of the table.
The class .wy-nav-content has a background which masks the highlighting.
Setting an opacity lower than 1, creates a new stack context and let
the column highlight to be shown.
The background of odd rows was grey and opaque. It is redefined with
a transparent alpha ratio in order to see highlighting on such rows.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Every cells of a feature row are painted in yellow.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some CSS alignments were not explicitly set.
The pointer is also set to default for the table.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
As announced in the deprecation notice, remove the functions for
single/multi producer/consumer enqueue/dequeue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add template release notes for DPDK 17.05 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.ricahrdson@intel.com>
A new parameter is planned to be added in 17.05 release in
rte_cryptodev_info.sym - max_nb_sessions_per_qp.
This will allow applications to know the maximum number of session
which can be attached to queue_pairs of device.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
