Add support for setting custom baseband PHY IRQ handler.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for removing existing IRQ stack.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving IRQ stack.
If stack does not exist then it gets created.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for checking whether given IRQ is available.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for initializing baseband PHY IRQs. While at it
also add support for reverting back to the default state.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for device init and fini. It merely saves
baseband phy state container in a globally accessible
resource chest.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for starting or stopping specific lmac.
Start enables Rx/Tx traffic while stop does the opposite.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for setting link up or down.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for setting link mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disablig PTP mode.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for enabling or disabling internal loopback.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for retrieving link information.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Messages can be exchanged between userspace software and firmware
via set of two dedicated registers, namely scratch1 and scratch0.
scratch1 acts as a command register i.e message is sent to firmware,
while scratch0 holds response to previously sent message.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for low level initialization and cleanup of baseband
PHY CGX/RPM blocks.
Initialization and cleanup are related hence are in the same patch.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
On some kernels the string attributes within Netlink
reply messages might be not padded with zeroes (in cases
when string length is aligned with 4-byte boundary).
While device probing, the physical port name was wrongly recognized,
causing a probing failure.
Fixes: 30a86157f6d5 ("net/mlx5: support PF representor")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.
Signed-off-by: Gordon Noonan <gordon.noonan@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
MCDI helper routines in libefx include length checks for response
messages, to ensure that short replies and optional fields are
handled correctly.
If the MCDI response message from the firmware is larger than the
caller's buffer then the response length reported to the caller
should be limited to the buffer size. Otherwise length checks in
the caller may allow reading past the end of the buffer.
Fixes: 6f619653b9b1 ("net/sfc/base: import MCDI implementation")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
These files were added without required SPDX headers.
Fixes: 7525ebd8ebb0 ("common/mlx5: add glue functions on Windows")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
The crypto driver added new fields to the mkey attributes struct:
crypto_en and set_remote_rw.
The entire mkey struct was not initialized, only specific fields in it,
which caused the new added fields not to be initialized resulting in a
mkey creation error.
This is fixed by initializing the entire mkey attributes struct to 0
which will prevent this issue from reoccurring if any fields are added
to the mkey struct in the future.
Fixes: 0111a74e13dd ("common/mlx5: adjust DevX mkey fields for crypto")
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch increases the intermediate buffer size used for the
compression on QAT GEN3 to accommodate new hardware versions.
Fixes: a124830a6f00 ("compress/qat: enable dynamic huffman encoding")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Adding support for connection tracking ASO creation via Devx command.
Right now only bulk creation is supported.
By default, the objects with zero contents will be created. Before
using a single object, the modification via posting a WQE to the ASO
CT SQ is needed.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
During startup, the ASO connection tracking offload capability could
be queried via HCA_CAP_QUERY command. If the HW doesn't support ASO
CT, the value would be 0 by default. The following initialization
should be skipped and the creation of the CT object should return
a failure directly.
The following CT creation should also check this capability. With
the old driver, the pre-processing macro should be used in order to
make the compiling pass.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The structures of ASO connection tracking offload object are added
based on the definitions in the PRM. One CT object context will be
loaded into the cache completely in a reversed order of dwords. The
valid bit should be the MSB of the last dword. This is used for the
conntrack context creation and update, as well as for the query.
The capabilities 2 (HCA_CAP_2) layout is also added. The connection
tracking related capabilities could be queried via the HCA_CAP_2.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Due to kernel issue in direct MKEY creation using the DevX API for
physical memory, this patch replaces the ASO MR creation to use Verbs
API.
Fixes: f935ed4b645a ("net/mlx5: support flow hit action for aging")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The new virtchnl protocol header types for IPv4 and IPv6 fragment are
not added in order, which will break ABI. Move them to the end of the
list.
Fixes: e6a42fd9158b ("common/iavf: add protocol header for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
mlx5 in Windows needs the hca capability csum_cap
to query the NIC for checksum offloading support.
Added the capability as part of the capabilities
queried by the PMD using DevX.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Odi Assli <odia@nvidia.com>
Currently meter algorithms only supports bytes units for meter profiles.
Using ASO feature, the driver can support metering in per packet units.
Add support for packet units in meter profiles.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently raw hex values are used to define specific bits for each
offload/capability in virtchnl.h. The can and has led to duplicate
defined bits. Fix this by using the BIT() macro so it's
immediately obvious which bits are used/available.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
General clean up for comment in virtchnl.
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Support for allowing VFs to negotiate the descriptor format was added
previously.
This support requires that the VF specify which descriptor format to use
when requesting Rx queues. The VF is supposed to request the set of
supported formats via the new VIRTCHNL_OP_GET_SUPPORTED_RXDIDS, and then
set one of the supported formats in the rxdid field of the
virtchnl_rxq_info structure.
The virtchnl.h header does not provide an enumeration of the format
values. The existing implementations in the PF directly use the values
from the DDP package.
Make the formats explicit by defining an enumeration of the RXDIDs.
Provide an enumeration for the values as well as the bit positions as
returned by the supported_rxdids data from the
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The value of offload VIRTCHNL_VF_OFFLOAD_CRC bit already existed as
VIRTCHNL_VF_CAP_ADV_LINK_SPEED. Fix this now by changing the value of
VIRTCHNL_VF_OFFLOAD_CRC to a currently unused value.
Also, move the define for VIRTCHNL_VF_CAP_ADV_LINK_SPEED in the correct
place to line up with the other bit values and add a comment for its
purpose. Hopefully this will prevent from defining duplicate bits moving
forward.
Fixes: e244eeafcecb ("net/iavf/base: update virtual channel")
Cc: stable@dpdk.org
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Added two virtchnl protocol header types for L2TPv2 and PPP to support
the RSS hash for PPPoL2TPv2oUDP.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In function efx_pci_xilinx_cap_tbl_find, pointer entry_offsetp is used
before null pointer check, which may cause access to null pointer.
This patch fix this problem.
Fixes: ba9568b8b4b7 ("common/sfc_efx/base: add Xilinx capabilities table lookup")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the struct defining UMR and RDMA write WQEs.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Signed-off-by: Matan Azrad <matan@nvidia.com>
Encryption key management requires use of several related registers.
This patch adds the relevant structs and values, according to PRM
definitions.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
CREDENTIAL object is used for any crypto operation in wrapped mode.
This patch add support of CREDENTIAL object create operation.
Add reading of CREDENTIAL support capability.
Add function to create general object type CREDENTIAL, using DevX API.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The get_ib_device_match function iterates over the list of ib devices
returned by the get_device_list glue function and returns the ib device
matching the provided address.
Since this function is in use by several drivers, in this patch we
share the function in common part.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In order to use the hash list defined in net in other drivers, the
hash list is moved to common utilities.
In addition, the log definition was moved from the common utilities to
a dedicated new log file in common in order to prevent a conflict.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds the struct defining crypto BSF segment of UMR WQE,
and the related value definitions and offsets.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
CRYPTO_LOGIN Object is used to login to the device as crypto user
or crypto officer.
Required in order to perform any crypto related control operations.
This patch adds support of CRYPTO_LOGIN object create operation.
Add reading of CRYPTO_LOGIN support capability.
Add function to create general object type CRYPTO_LOGIN, using DevX API.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
IMPORT_KEK object is used to wrap (encrypt) critical security
parameters, such as other keys and credentials, when those need
to be passed between the device and the software.
This patch add support of IMPORT_KEK object create operation.
Add reading of IMPORT_KEK support capability.
Add function to create general object type IMPORT_KEK, using DevX API.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MKEY that will be used for crypto purposes must be created with
crypto_en and remote access attributes.
This patch adds support for them in the DevX MKEY context.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
