Fix an access to an uninitialized list when the management FW is not
initialized by simply doing the list initialization always, at a
previous step, before ecore_mcp_cmd_init() can stop in the middle and
return.
Fixes: 22c996968b ("net/qede/base: revise management FW mbox access scheme")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Remove some dead definitions, function declarations and unused
variables
- Remove an obsolete workaround from ecore_int_igu_enable()
- Remove set variables that are not used
- Remove needless check in ecore_init_wfq_param() when configuring
minimum vport BW. We already check whether total for all vports is
greater than the PF's, so no need to check independently the current
requested configuration as well.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Changes include:
- adding new log to print Dcbx version
- reformatting log in ecore_dmae_operation_wait() in case of DMA engine
failure
- changing verbosity of some log messages such as:
VFs incorrect behavior should be logged on PF with DP_VERBOSE(), not
DP_NOTICE(). In general keep IOV-related logs at low verbosity.
Log the critical issues from VF perspective, like message to PF
times-out or the PF rejects the VF configuration, as NOTICE than
VERBOSE
- Add a printout of some MCP CPU info in case of no MFW response
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
- Introduce OSAL_IOV_VF_VPORT_STOP to allow VF to carry out required
operations and prevent a potential assert before closing vport
- Add OSAL_DIV_S64() for 64-bit division on 32-bit platforms.
- Add OSAL for transceiver update OSAL_TRANSCEIVER_UPDATE()
- Add OSAL for MFW command preemption OSAL_MFW_CMD_PREEMPT() within the
spinning loops while sending a mailbox command to the MFW
- Implement OSAL_SPIN_LOCK_IRQSAVE macro
- Rename OSAL_NUM_ACTIVE_CPU() to OSAL_NUM_CPUS()
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Introduce 2 new API functions, one for the VF and the other for
PF [per-VF] which allows to decide whether to use HW/SW channel
for PF<->VF communication(a per-VF configuration). A HyperV might
have different VMs with different requirements.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support to firmware for:
- New SFP type 1000BaseT
- DON (Diag Over Network). This feature implements a server side for
process data access commands over Ethernet.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
add start, stop and close support.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark packet type parsing in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark "Queue start/stop" as P as its been implemented only for tx queue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Implement "mac_addr_set" op and mark "Unicast MAC filter" feature as "P"
as "mac_addr_add" and "mac_addr_remove" are not implemented.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Basic stats support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Promiscuous mode in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Link status in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
mark Jumbo frame, CRC offload support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Create ethdev ports by registering withethdev subsystem based on
"nr_port" vdev argument or maximum physical ports available in the system.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
An octeontx ethdev device consists of multiple PKO VF devices, a PKI
VF device and multiple SSOVF devices which shared between eventdev.
This patch adds a vdev based device called "eth_octeontx" which
will create multiple ethernet ports based on "nr_port" or maximum
physical ports are available in the system.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
PKO is the packet output processing unit, which receives the packet
from the core and sends to the BGX interface. This patch adds the
basic PKO operation like open, close, start and stop. These operations
are implemented through mailbox messages and kernel PF driver being the
server to process the message with the logical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Adding remaining PKI operations and sync up the mailbox
definitions with PF driver.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
PKI is packet input unit, which receives the packet from the
BGX interface. This patch adds the basic PKI operation like
open, close, start and stop. These operations are implemented through
mailbox messages and kernel PF driver being the server to process the
message with the logical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
An octeontx ethdev device consists of multiple PKO VF devices and an PKI
VF device. On Octeontx HW, each Rx queues are enumerated as SSOVF device
which is exposed as event_octeontx device, Tx queues are enumerated as
PKOVF device, and ingress packet configuration is accomplished through
PKIVF device.
In order to expose as an single ethdev instance, On PCIe VF probe,
the driver stores the information associated with the PCIe VF device and
later with vdev infrastructure creates ethdev device with earlier
probed PCIe VF device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
BGX is an HW MAC interface. This patch adds the basic BGX operation like
open, close, start and stop. These operations are implemented through
mailbox messages and kernel PF driver being the server to process the
message with the physical port identifier.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Some of the internal toolchain versions create unaligned
memory access fault when copying from 17-31B buffer using memcpy.
Subsequent patches in this series will be using 17-31B mbox message.
Since the mailbox message copy comes in slow path, changing memcpy to
byte-per-byte copy to workaround the issue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Adding octeontx specific io operations. Added a stub for building
against non octeontx targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Change loop counter that should be based on the number
of rx queues, not tx queues. This only affects debug
output.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
During a link down event of a port participating in a LACP 802.3ad
bond the current behavior can cause all ports to be deselected
and temporarily stop all traffic on the bond, causing unexpected
traffic loss across all ports and not just the port which was
affected by the link down event.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC virtio_rxtx.o
virtio_rxtx.c: In function ‘virtio_rx_offload’:
virtio_rxtx.c:680:10: error: ‘csum’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
csum = ~csum;
~~~~~^~~~~~~
The function rte_raw_cksum_mbuf() may indeed return an error, and
in this case, csum won't be initialized. Fix it by initializing csum
to 0.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PMD uses Verbs object which were not available in the shared memory.
This patch modify the location where Verbs objects are allocated (from
process memory address space to shared memory address space) and thus
allow a secondary process to use those object by mapping this shared
memory space its own memory space.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Use a unix socket to get back the communication channel with the Kernel
driver from the primary process, this is necessary to remap those pages
in the secondary process memory space and thus use the same Tx queues.
This is only supported from rdma-core (v15).
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
rte_eth_dev created by primary process were not available in secondary
process, it was not possible to use the primary process local memory
object from a secondary process.
This patch modify the reference of primary rte_eth_dev object, use
local rte_eth_dev secondary process instead.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Need a way to convert a VF id to a PF id on the host so as to query the
PF for relevant statistics which are used for the frequency changes in
the vm_power_manager app.
Used when profiles are passed down from the guest to the host, allowing
the host to map the VFs to PFs.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Naming convention for event drivers is "rte_pmd_<name>_event_version.map"
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Fix calling strncpy with the a maximum size equal of destination
array size.
Coverity issue: 140732
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
