A new event RTE_ETH_EVENT_RX_AVAIL_THRESH should be generated by HW
when number of available descriptors in Rx queue goes below the
threshold.
The threshold is defined as a percentage of an Rx queue size with valid
values from 0 to 99 (inclusive). Zero (default) value disables it.
There is no capability reporting for the feature. Application should
simply try to set required threshold value and handle result.
Add testpmd commands to control the threshold:
set port <port_id> rxq <rxq_id> avail_thresh <avail_thresh_num>
Signed-off-by: Spike Du <spiked@nvidia.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Secondary process needs to close device to release process private
resources. But secondary process should not be obliged to wait for
device stop before closing ethdev.
Fixes: febc855b358e ("ethdev: forbid closing started device")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a new telemetry command /ethdev/module_eeprom to dump the module
EEPROM of each port. The format of module EEPROM information follows
the SFF(Small Form Factor) Committee specifications.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently, 'dev_started' is always set to be 0 when dev stop, whether
it succeeded or failed. This is unreasonable and this patch fixed it.
Fixes: 62024eb82756 ("ethdev: change stop operation callback to return int")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The rte_tel_data_alloc() may return NULL, so the caller should add
judgement for it.
Fixes: 083b0b310b19 ("ethdev: add common stats for telemetry")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When xstats location is null in rte_eth_xstats_get() the return value
is not clearly specified. Some PMDs (eg. hns3/ipn3ke/mvpp2/axgbe) return
zero while others return the required number of elements.
In this patch, special parameter combinations are restricted:
1. highlight that xstats location may be null if and only if n is 0.
2. amend n parameter description to specify that if n is lower than
the required number of elements, the function returns the required
number of elements.
3. specify that if n is zero, the xstats must be NULL, the function
returns the required number of elements (a duplicate which should
help to not very attentive readers).
Add sanity check for null xstats and non-zero n case on API level to
make it unnecessary to care about it in drivers.
Fixes: ce757f5c9a4d ("ethdev: new method to retrieve extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The RTE_ETH_MQ_RX_RSS_FLAG flag is a switch to enable RSS. If the flag
is not set in dev_configure, RSS will be not configured and enabled.
However, RSS hash and reta can still be configured by ethdev ops to
enable RSS if the flag isn't set. The behavior is inconsistent.
Fixes: 99a2dd955fba ("lib: remove librte_ prefix from directory names")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The right size for a human readable MAC is RTE_ETHER_ADDR_FMT_SIZE.
While at it, the net library provides a helper for MAC address
formatting. Prefer it.
Fixes: 58b43c1ddfd1 ("ethdev: add telemetry endpoint for device info")
Cc: stable@dpdk.org
Reported-by: Christophe Fontaine <cfontain@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
ethdev has two interfaces, one interface between applications and
library, these APIs are declared in the rte_ethdev.h public header.
Other interface is between drivers and library, these functions are
declared in ethdev_driver.h and marked as internal.
But all functions are defined in rte_ethdev.c file. This patch moves
functions for drivers to its own file, ethdev_driver.c for cleanup, no
functional change in functions.
Some public APIs and driver helpers call common internal functions,
which were mostly static since both were in same file. To be able to
move driver helpers, common functions are moved to ethdev_private.c.
(ethdev_private.c is used for functions that are internal to the library
and shared by multiple .c files in the ethdev library.)
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Added the ethdev dump API which provides querying private info from device.
There exists many private properties in different PMD drivers, such as
adapter state, Rx/Tx func algorithm in hns3 PMD. The information of these
properties is important for debug. As the information is private, the new
API is introduced.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This NULL check is unnecessary, 'eth_dev' is never NULL.
Fixes: 58b43c1ddfd1 ("ethdev: add telemetry endpoint for device info")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Hardware IP reassembly may be incomplete for multiple reasons like
reassembly timeout reached, duplicate fragments, etc.
To save application cycles to process these packets again, a new
mbuf dynflag is added to show that the mbuf received is not
reassembled properly.
Now if this dynflag is set, application can retrieve corresponding
chain of mbufs using mbuf dynfield set by the PMD. Now, it will be
up to application to either drop those fragments or wait for more time.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
IP Reassembly is a costly operation if it is done in software.
The operation becomes even more costlier if IP fragments are encrypted.
However, if it is offloaded to HW, it can considerably save application
cycles.
Hence, a new offload feature is exposed in eth_dev ops for devices which
can attempt IP reassembly of packets in hardware.
- rte_eth_ip_reassembly_capability_get() - to get the maximum values
of reassembly configuration which can be set.
- rte_eth_ip_reassembly_conf_set() - to set IP reassembly configuration
and to enable the feature in the PMD (to be called before
rte_eth_dev_start()).
- rte_eth_ip_reassembly_conf_get() - to get the current configuration
set in PMD.
Now when the offload is enabled using rte_eth_ip_reassembly_conf_set(),
the resulting reassembled IP packet would be a typical segmented mbuf in
case of success.
And if reassembly of IP fragments is failed or is incomplete (if
fragments do not come before the reass_timeout, overlap, etc), the mbuf
dynamic flags can be updated by the PMD. This is updated in a subsequent
patch.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Based on device support and use-case need, there are two different ways
to enable PFC. The first case is the port level PFC configuration, in
this case, rte_eth_dev_priority_flow_ctrl_set() API shall be used to
configure the PFC, and PFC frames will be generated using based on VLAN
TC value.
The second case is the queue level PFC configuration, in this
case, Any packet field content can be used to steer the packet to the
specific queue using rte_flow or RSS and then use
rte_eth_dev_priority_flow_ctrl_queue_configure() to configure the
TC mapping on each queue.
Based on congestion selected on the specific queue, configured TC
shall be used to generate PFC frames.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMDs would need a function to access the rte_eth_devices
without accessing the global rte_eth_device array.
Cc: stable@dpdk.org
Signed-off-by: Kumara Parameshwaran <kparameshwar@vmware.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In eth_dev_handle_port_info() allocated memory for rxq_state,
we should free it when error happens, otherwise it will lead
to memory leak.
Fixes: 58b43c1ddfd1 ("ethdev: add telemetry endpoint for device info")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for RTE_ETH_DEV_CAPA_FLOW_{RULE,SHARED_OBJECT}_KEEP
to rte_eth_dev_capability_name(), missed when adding the capabilities.
Fixes: 1d5a3d68c0f9 ("ethdev: add capability to keep flow rules on restart")
Fixes: 2c9cd45de7e6 ("ethdev: add capability to keep shared objects on restart")
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Xueming Li <xuemingl@nvidia.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
'eth_dev->data' can be null before ethdev allocated. The API walks
through all eth devices, at least for some data can be null.
Adding 'eth_dev->data' null check before accessing it.
Fixes: 33c73aae32e4 ("ethdev: allow ownership operations on unused port")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
rte_eth_dev_configure() always sets MTU to either dev_conf.rxmode.mtu
or RTE_ETHER_MTU if application doesn't provide the value.
So, there is no point to allow rte_eth_dev_set_mtu() before since
set value will be overwritten on configure anyway.
Fixes: 1bb4a528c41f ("ethdev: fix max Rx packet length")
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds API to return name of device capability.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In current DPDK framework, each Rx queue is pre-loaded with mbufs to
save incoming packets. For some PMDs, when number of representors scale
out in a switch domain, the memory consumption became significant.
Polling all ports also leads to high cache miss, high latency and low
throughput.
This patch introduces shared Rx queue. Ports in same Rx domain and
switch domain could share Rx queue set by specifying non-zero sharing
group in Rx queue configuration.
Shared Rx queue is identified by share_rxq field of Rx queue
configuration. Port A RxQ X can share RxQ with Port B RxQ Y by using
same shared Rx queue ID.
No special API is defined to receive packets from shared Rx queue.
Polling any member port of a shared Rx queue receives packets of that
queue for all member ports, port_id is identified by mbuf->port. PMD is
responsible to resolve shared Rx queue from device and queue data.
Shared Rx queue must be polled in same thread or core, polling a queue
ID of any member port is essentially same.
Multiple share groups are supported. PMD should support mixed
configuration by allowing multiple share groups and non-shared Rx queue
on one port.
Example grouping and polling model to reflect service priority:
Group1, 2 shared Rx queues per port: PF, rep0, rep1
Group2, 1 shared Rx queue per port: rep2, rep3, ... rep127
Core0: poll PF queue0
Core1: poll PF queue1
Core2: poll rep2 queue0
PMD advertise shared Rx queue capability via RTE_ETH_DEV_CAPA_RXQ_SHARE.
PMD is responsible for shared Rx queue consistency checks to avoid
member port's configuration contradict each other.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix it everywhere in ethdev including log messages.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The macros RTE_BIT32 and RTE_BIT64 are used to replace bit shifts.
The macro UINT64C is also used to replace remaining occurrences of ULL.
The bit shifts of ETH_RSS_LEVEL_* are kept for aesthetic reason.
The API of rte_mtr and rte_tm is using enums for 64-bit variables.
As they are enums, unsigned bit cannot be used.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Ethernet device must be stopped first before close in accordance
with the documentation.
Fixes: 980995f8cc56 ("ethdev: improve API comments of close and detach functions")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Both 'rte_eth_dev_configure()' & 'rte_eth_dev_set_mtu()' sets MTU but
have slightly different checks. Like one checks min MTU against
RTE_ETHER_MIN_MTU and other RTE_ETHER_MIN_LEN.
Checks moved into common function to unify the checks. Also this has
benefit to have common error logs.
Default 'dev_info->min_mtu' (the one set by ethdev if driver doesn't
provide one), changed to ('RTE_ETHER_MIN_LEN' - overhead). Previously it
was 'RTE_ETHER_MIN_MTU' which is min MTU for IPv4 packets. Since the
intention is to provide min MTU corresponding minimum frame size, new
default value suits better.
Suggested-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The driver may change offloads info into dev->data->dev_conf
in dev_configure which may cause apps use outdated values.
Add a new API to get actual device configuration.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Copy public function pointers (rx_pkt_burst(), etc.) and related
pointers to internal data from rte_eth_dev structure into a
separate flat array. That array will remain in a public header.
The intention here is to make rte_eth_dev and related structures internal.
That should allow future possible changes to core eth_dev structures
to be transparent to the user and help to avoid ABI/API breakages.
The plan is to keep minimal part of data from rte_eth_dev public,
so we still can use inline functions for fast-path calls
(like rte_eth_rx_burst(), etc.) to avoid/minimize slowdown.
The whole idea beyond this new schema:
1. PMDs keep to setup fast-path function pointers and related data
inside rte_eth_dev struct in the same way they did it before.
2. Inside rte_eth_dev_start() and inside rte_eth_dev_probing_finish()
(for secondary process) we call eth_dev_fp_ops_setup, which
copies these function and data pointers into rte_eth_fp_ops[port_id].
3. Inside rte_eth_dev_stop() and inside rte_eth_dev_release_port()
we call eth_dev_fp_ops_reset(), which resets rte_eth_fp_ops[port_id]
into some dummy values.
4. fast-path ethdev API (rte_eth_rx_burst(), etc.) will use that new
flat array to call PMD specific functions.
That approach should allow us to make rte_eth_devices[] private
without introducing regression and help to avoid changes in drivers code.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
At queue configure stage always allocate space for maximum possible
number (RTE_MAX_QUEUES_PER_PORT) of queue pointers.
That will allow 'fast' inline functions (eth_rx_burst, etc.) to refer
pointer to internal queue data without extra checking of current number
of configured queues.
That would help in future to hide rte_eth_dev and related structures.
It means that from now on, each ethdev port will always consume:
((2*sizeof(uintptr_t))* RTE_MAX_QUEUES_PER_PORT)
bytes of memory for its queue pointers.
With RTE_MAX_QUEUES_PER_PORT==1024 (default value) it is 16KB per port.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Provide an API to let the application control the NIC's ability
to deliver specific kinds of per-packet metadata to the PMD.
Checks for the NIC's ability to set these kinds of metadata
in the first place (support for the flow actions) belong in
flow API responsibility domain (flow validate mechanism).
This topic is out of scope of the new API in question.
The PMD's ability to deliver received metadata to the user
by virtue of mbuf fields should be covered by mbuf library.
It is also out of scope of the new API in question.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
The patch is required for all PMDs which do not provide representors
info on the representor itself.
The function, rte_eth_representor_id_get(), is used in
eth_representor_cmp() which is required in ethdev class iterator to
search ethdev port ID by name (representor case). Before the patch
the function is called on the representor itself and tries to get
representors info to match.
Search of port ID by name is used after hotplug to find out port ID
of the just plugged device.
Getting a list of representors from a representor does not make sense.
Instead, a backer device should be used.
To this end, extend the rte_eth_dev_data structure to include the port ID
of the backing device for representors.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
rte_eth_rx_descriptor_status() should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
