This commit adds producer, worker and consumer port hints for the
test-eventdev application performance tests.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This commit adds the per-port hints added to the eventdev API, indicating
which eventdev ports will be used for producing, forwarding, or consuming
events from the system.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This commit introduces 3 flags to the port configuration flags.
These flags allow the application to indicate what type of work
is expected to be performed by an eventdev port.
The three new flags are
- RTE_EVENT_PORT_CFG_HINT_PRODUCER (mostly RTE_EVENT_OP_NEW events)
- RTE_EVENT_PORT_CFG_HINT_CONSUMER (mostly RTE_EVENT_OP_RELEASE events)
- RTE_EVENT_PORT_CFG_HINT_WORKER (mostly RTE_EVENT_OP_FORWARD events)
These flags are only hints, and the PMDs must operate under the
assumption that any port can enqueue an event with any type of op.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added changes to receive packets as event vector. By default this is
disabled and can be enabled using the option --event-vector. Vector
size and timeout to form the vector can be configured using options
--event-vector-size and --event-vector-tmo.
Example:
dpdk-l2fwd-event -l 0-3 -n 4 -- -p 0x03 --mode=eventdev \
--eventq-sched=ordered --event-vector --event-vector-size 16
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added changes to receive packets as event vector. By default this is
disabled and can be enabled using the option --event-vector. Vector
size and timeout to form the vector can be configured using options
--event-vector-size and --event-vector-tmo.
Example:
dpdk-l3fwd -l 0-3 -n 4 -- -p 0x03 --mode=eventdev \
--eventq-sched=ordered --event-vector --event-vector-size 16
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When a poll queue is removed from a rx_adapter instance, the WRR poll
array is recomputed. The wrr array length is reduced in this case. The
next wrr position to poll is stored in wrr_pos variable of rx_adapter
instance. This wrr_pos can become invalid in some cases after wrr is
recomputed. Using this variable to get the next queue and device pair
may leed to wrr buffer overruns.
Resetting the wrr_pos to zero after recomputation of wrr array fixes
the buffer overrun issue.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before this commit, a Control^C exit of the test-eventdev application
would print the worker packet percentages, and leave the terminal with
a green colour despite the colour reset being issued after the newline.
By moving the colour reset command before the \n the issue is fixed.
Fixes: 6b1a14a83a ("app/eventdev: add packet distribution logs")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Mark rte_trace global variables as internal i.e. remove them
from experimental section of version map.
Some of them are used in inline APIs, mark those as global.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Slowpath trace APIs are only used in rte_eventdev.c so make them
as internal.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Move memory used by timer adapters to hugepage.
Allocate memory on the first adapter create or lookup to address
both primary and secondary process usecases.
This will prevent TLB misses if any and aligns to memory structure
of other subsystems.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Rearrange fields in rte_event_timer data structure to remove holes.
Also, remove use of volatile from rte_event_timer.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Remove rte_ prefix from rte_eth_event_enqueue_buffer,
rte_event_eth_rx_adapter and rte_event_crypto_adapter
as they are only used in rte_event_eth_rx_adapter.c and
rte_event_crypto_adapter.c
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Hide rte_event_timer_adapter_pmd.h file as it is an internal file.
Remove rte_ prefix from rte_event_timer_adapter_ops structure.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Use new driver interface for the fastpath enqueue/dequeue inline
functions.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Invoke event_dev_probing_finish() function at the end of probing,
this function sets the function pointers in the fp_ops flat array.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Move fastpath inline function pointers from rte_eventdev into a
separate structure accessed via a flat array.
The intention is to make rte_eventdev and related structures private
to avoid future API/ABI breakages.`
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Allocate max space for internal port, port config, queue config and
link map arrays.
Introduce new macro RTE_EVENT_MAX_PORTS_PER_DEV and set it to max
possible value.
This simplifies the port and queue reconfigure scenarios and will
also allow inline functions to refer pointer to internal port data
without extra checking of current number of configured queues.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Create rte_eventdev_core.h and move all the internal data structures
to this file. These structures are mostly used by drivers, but they
need to be in the public header file as they are accessed by datapath
inline functions for performance reasons.
The accessibility of these data structures is not changed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Mark all the driver specific functions as internal, remove
`rte` prefix from `struct rte_eventdev_ops`.
Remove experimental tag from internal functions.
Remove `eventdev_pmd.h` from non-internal header files.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Added telemetry callbacks to get Rx adapter stats, reset stats and
to get Rx queue config information.
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added per queue buffer. To configure per queue event buffer size,
application sets rte_event_eth_rx_adapter_params::use_queue_event_buf
flag as true while using rte_event_eth_rx_adapter_create_with_params().
The per queue event buffer size is populated in
rte_event_eth_rx_adapter_queue_conf::event_buf_size and passed
to rte_event_eth_rx_adapter_queue_add().
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Currently event buffer is static array with a default size defined
internally.
To configure event buffer size from application,
rte_event_eth_rx_adapter_create_with_params() API is added which
takes struct rte_event_eth_rx_adapter_params to configure event
buffer size in addition other params. The event buffer size is
rounded up for better buffer utilization and performance. In case
of NULL params argument, default event buffer size is used.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added rte_event_eth_rx_adapter_queue_conf_get() API to get rx queue
information - event queue identifier, flags for handling received packets,
scheduler type, event priority, polling frequency of the receive queue
and flow identifier in rte_event_eth_rx_adapter_queue_conf structure
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to register timestamp dynamic field in mbuf.
Update the timestamp in mbuf for each packet before enqueuing
to event device if the timestamp is not already set.
Adding the timestamp in Rx adapter avoids additional latency
due to the event device.
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Include vector configuration into the structure
``rte_event_eth_rx_adapter_queue_conf`` that is used to configure
Rx adapter ethernet device Rx queue parameters.
This simplifies event vector configuration as it avoids splitting
configuration per Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event crypto adapter spec does not mention about cryptodev start and
stop. Cryptodev attached to the adapter should be started before calling
crypto adapter start. Added the same in spec and test application.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Reduced max chunk pool cache size from RTE_MEMPOOL_CACHE_MAX_SIZE(512)
to 128.
If chunk pool cache is empty, it gets filled during arm. Filling 512
entries at a time will fail arm if timeout is shorter, hence
reduce the pool cache size.
Fixes: 0e792433d0 ("event/cnxk: create and free timer adapter")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Type of kvargs value and handler function argument should match to avoid
spilling memory.
Fixes: 7ffa737996 ("event/cnxk: add option to configure getwork mode")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Rx adapter uses memove() to move unprocessed events to the beginning of
the packet enqueue buffer. The use memmove() was found to consume good
amount of CPU cycles (about 20%).
This patch removes the use of memove() while implementing a circular
buffer to avoid copying of data. With this change RX adapter is able
to fill the buffer of 16384 events.
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Cores count has a direct impact on the time needed to complete unit
tests.
Currently, the core list used for unit test is enforced to "all cores on
the system" with no way for (CI) users to adapt it.
On the other hand, EAL default behavior (when no -c/-l option gets passed)
is to start threads on as many cores available in the process cpu
affinity.
Remove logic from meson: users can then select where to run the tests by
either running meson with a custom cpu affinity (using taskset/cpuset
depending on OS) or by passing a --test-args option to meson.
Example:
$ sudo meson test -C build --suite fast-tests -t 3 --test-args "-l 0-3"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Expand the use of mempool registration to MR management for other
drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since MR management has moved to the common area, there is no longer a
need for the DMA map and unmap function for each driver.
This patch share those functions. For most drivers it supports these
operations for the first time.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add global shared MR cache as a field of common device structure.
Move MR management to use this global cache for all drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function to search in local liniar cache and use it in the drivers
instead of their functions.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for global shared MR cache structure initialization.
This function include:
- btree initialization.
- set callbacks for reg and dereg MR.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add function for MR control structure initialization.
This function include:
- btree initialization.
- dev_gen_ptr initialization.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch remove two redundant things from MR file:
1. mr_find_contig_memsegs_data structure which is moved to common file
before.
2. External memory mechanism - mlx5_tx_update_ext_mp function.
Since commit [1] which added support for DMA map and unmap, external
mem must be configured by the user using rte_mem_map function and no
need to handle this in pmd.
[1]
commit 989e999d93
("net/mlx5: support PCI device DMA map and unmap")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add HCA attributes structure as a field of device config structure.
It query in common probing, and updates the timestamp format fields.
Each driver use HCA attributes from common device config structure,
instead of query it for itself.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared Protection Domain in common area and add it and its PDN as
fields of common device structure.
Use this Protection Domain in all drivers and remove the PD and PDN
fields from their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add option to get IB device after disabling RoCE. It is relevant if
there is vDPA class in device arguments list.
Use common device context in vDPA driver and remove the ctx field from
its private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create shared context device in common area and add it as a field of
common device.
Use this context device in all drivers and remove the ctx field from
their private structure.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Device configure structure has flag named devx as same as SH structure
with the same meaning.
Remove the flag from the configuration structure and move all the
usages to the SH flag.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add device configure structure and function to parse user device
arguments into it.
Move parsing and management of relevant device arguments to common.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create MACRO definitions file in the common driver as preparation for MR
and basic probe sharing.
Move relevant definitions from the net driver to the above file.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create common probing structure that includes, for now, basic probing
information detected by the common driver and share it with all the
internal drivers.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
