Code changes to avoid the following build error:
"Control reaches end of non-void function".
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Resizing event list only makes sense in MSIX case.
Besides, event list has always been RTE_MAX_RXTX_INTR_VEC_ID large.
Let's restore this assumption for code that might rely on this property
and only enlarge the event list when necessary.
Bugzilla ID: 843, 865
Fixes: 8cb5d08db9 ("interrupts: extend event list")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Currently, the documentation only contains instructions for enabling
SRIOV support for VFIO compiled as a module, but doesn't have any
instructions on how to do the same for cases where VFIO is built-in.
Add these instructions.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Partial unmap support was introduced in commit c13ca4e81c
("vfio: fix DMA mapping granularity for IOVA as VA"), and with it
was added a check that dereferenced the IOMMU type to determine whether
partial ummapping is supported for currently configured IOMMU type. In
certain circumstances (such as when VFIO is supported, but no devices
were bound to the VFIO driver), the IOMMU type pointer can be NULL.
However, dereferencing of IOMMU type was guarded by access to the user
maps list - that is, we were always checking the user map list first,
and then, if we found a memory region that encloses the one we're trying
to unmap, we would have performed the IOMMU type check.
This ensured that the IOMMU type check will not cause any NULL pointer
dereferences, because in order for an IOMMU type check to have been
performed, there necessarily must have been at least one memory region
that was previously mapped successfully, and that implies having a
defined IOMMU type.
When commit 56259f7fc0 ("vfio: allow partially unmapping adjacent
memory") was introduced, the IOMMU type check was moved to
before we were traversing the user mem maps list, thereby introducing a
potential NULL dereference, because the IOMMU type access was no longer
guarded by the user mem maps list traversal.
Fix the issue by moving the IOMMU type check to after the user mem maps
traversal, thereby ensuring that by the time the check happens, the
IOMMU type is always valid.
Fixes: 56259f7fc0 ("vfio: allow partially unmapping adjacent memory")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Tested-by: Xuan Ding <xuan.ding@intel.com>
When checking if the DMA device is active, the result of the operand will
always be zero since the err_code is truncated to 8 bits which makes
checking the 31st bit impossible.
This is fixed by changing the type of err_code to uint32_t so that it is
not truncated.
Coverity issue: 373657
Fixes: 9449330a84 ("dma/idxd: create dmadev instances on PCI probe")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Existing functions, structures, defines etc need to be updated to reflect
the change to using the dmadev APIs.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
The dmadev library abstraction allows applications to use the same APIs for
all DMA device drivers in DPDK. This patch updates the ioatfwd application
to make use of the new dmadev APIs, in turn making it a generic application
which can be used with any of the DMA device drivers.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Enable dumping device info via the signal handler. With this change, when a
SIGUSR1 is issued, the application will print a dump of all devices being
used by the application.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a commandline options to control the HW copy batch size in the
application.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Few changes in ioat sample behaviour:
- Always do SW copy for packet metadata (mbuf fields)
- Always use same lcore for both DMA requests enqueue and dequeue
Main reasons for that:
a) it is safer, as idxd PMD doesn't support MT safe enqueue/dequeue (yet).
b) sort of more apples to apples comparison with sw copy.
c) from my testing things are faster that way.
Documentation updates to reflect these changes are also included.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
(bitratestats_autotest|latencystats_autotest|pdump_autotest) tests
generate a log of error messages like that:
test_packet_forward() line 104: Error sending packet to port 0
Send pkts Failed
These tests use of app/test/sample_packet_forward.* code.
This code creates a portid from a ring, but doesn't properly
configure/start it.
The fix adds code to configure/start given port before usage.
Fixes: 7a0935239b ("ethdev: make fast-path functions to use new flat array")
Fixes: a52966cd48 ("test: add helpers using ring PMD Rx/Tx")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
This fixes most of the warnings from the Flake8 style checker.
The ones remaining are long lines (we allow > 79 characters)
and a line break warning. The line break style changed in later
versions of PEP 8 and the tool is not updated.
https://www.flake8rules.com/rules/W503.html
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The default behaviour of l2fwd is to exit if we are unable to turn
promiscuous mode on. On some aws instances turning promiscuous mode
on is not permitted. In such cases there should be a way to run the
application without promiscuous mode.
This patch allows user to turn promiscuous mode on via command line
parameter. l3fwd has a similar option available.
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some options are needed in the runtime many times, so leaving
it during compilation is not correct. As a result some options
has been exported into command line options to be used at run
time.
The options exported are:
--txq=N
--rxq=N
--txd=N
--rxd=N
--mbuf-size=N
--mbuf-cache-size=N
--total-mbuf-count=N
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Add a testcase to test launching of control threads.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Remove the usage of pthread barrier and replace it with
synchronization using atomic variable.
This also removes the use of reference count required to synchronize
freeing the memory.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Dynamically allocating the efds and elist array of intr_handle
structure, based on size provided by user. Eg size can be
MSIX interrupts supported by a PCI device.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
VFIO/UIO are mutually exclusive, storing file descriptor in a single
field is enough.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Moving interrupt handle structure definition inside a EAL private
header to make its fields totally opaque to the outside world.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Implementing alarm cleanup routine, where the memory allocated
for interrupt instance can be freed.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Updating the interrupt testsuite to make use of interrupt
handle get set APIs.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Making changes to the interrupt framework to use interrupt handle
APIs to get/set any field.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Prototype/Implement get set APIs for interrupt handle fields.
User won't be able to access any of the interrupt handle fields
directly while should use these get/set APIs to access/manipulate
them.
Internal interrupt header i.e. rte_eal_interrupt.h is rearranged,
as APIs defined are moved to rte_interrupts.h and epoll specific
definitions are moved to a new header rte_epoll.h.
Later in the series rte_eal_interrupt.h will be removed.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Windows EAL did not detect IOVA mode and worked incorrectly
if physical addresses could not be obtained
(if virt2phys driver was missing or inaccessible).
In this case, rte_mem_virt2iova() reported RTE_BAD_IOVA for any address.
Inability to obtain IOVA, be it PA or VA, should cause a failure
for the DPDK allocator, but it was hidden by the implementation,
so allocations did not fail when they should.
The mode when DPDK cannot obtain PA but can work is IOVA-as-VA mode.
However, rte_eal_iova_mode() always returned RTE_IOVA_DC
(while it should only ever return RTE_IOVA_PA or RTE_IOVA_VA),
because IOVA mode detection was not implemented.
Implement IOVA mode detection:
1. Always allow to force --iova-mode=va.
2. Allow to force --iova-mode=pa only if virt2phys is available.
3. If no mode is forced and virt2phys is available,
select the mode according to bus requests, default to PA.
4. If no mode is forced but virt2phys is unavailable, default to VA.
Fix rte_mem_virt2iova() by returning VA when using IOVA-as-VA.
Fix rte_eal_iova_mode() by returning the selected mode.
Fixes: 2a5d547a4a ("eal/windows: implement basic memory management")
Cc: stable@dpdk.org
Reported-by: Tal Shnaiderman <talshn@nvidia.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
This patch fixes buffer overflow reported by ASAN,
please reference https://bugs.dpdk.org/show_bug.cgi?id=819
The rte_lpm6 keeps routing information for control plane purpose
inside the rte_hash table which uses rte_jhash() as a hash function.
From the rte_jhash() documentation: If input key is not aligned to
four byte boundaries or a multiple of four bytes in length,
the memory region just after may be read (but not used in the
computation).
rte_lpm6 uses 17 bytes keys consisting of IPv6 address (16 bytes) +
depth (1 byte).
This patch increases the size of the depth field up to uint32_t
and sets the alignment to 4 bytes.
Bugzilla ID: 819
Fixes: 86b3b21952 ("lpm6: store rules in hash table")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 7574c3ef74 ("hash: add toeplitz algorithm used by RSS")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
wrk_cmd variable is used to signal the worker thread to start
or stop the stress test loop. Relaxed barriers are used
to achieve the same.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
Ensure that the memory operations before the call to
rte_eal_remote_launch are visible to the worker thread.
Use the function pointer to execute in worker thread
as the guard variable.
Ensure that the memory operations in worker thread, that happen
before it returns the status of the assigned function, are
visible to the main thread. Use the variable containing the
lcore's state as the guard variable.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
FINISHED state seems to be used to indicate that the worker's update
of the 'state' is not visible to other threads. There seems to be no
requirement to have such a state.
Since the FINISHED state is removed, the API rte_eal_wait_lcore
is updated to always return the status of the last function that
ran in the worker core.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
In the rte_eal_remote_launch function, the lcore function
pointer is checked for NULL. However, the pointer is never
reset to NULL. Reset the lcore function pointer and argument
after the worker has completed executing the lcore function.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
RTE_MBUF_REFCNT_ATOMIC = 0 is not necessary for applications like
Seastar, where it's safe to assume that the mbuf refcnt is only
updated by a single core only.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The way we're building DPDK in CI, with -Dmachine=default, has not been
updated when the option got replaced to preserve a backwards-complatible
build call to facilitate ABI verification between DPDK versions. Update
the call to use -Dplatform=generic, which is the most up to date way to
execute the same build which is now present in all DPDK versions the ABI
check verifies.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Aaron Conole <aconole@redhat.com>
Functions and macros in x86 rte_memcpy.h may cause cast-align warnings,
when using strict cast align flag with supporting gcc:
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
CFLAGS="-Wcast-align=strict" make V=1 -C examples/l2fwd clean static
For example:
In file included from main.c:24:
/dpdk/build/include/rte_memcpy.h: In function 'rte_mov16':
/dpdk/build/include/rte_memcpy.h:306:25: warning: cast increases
required alignment of target type [-Wcast-align]
306 | xmm0 = _mm_loadu_si128((const __m128i *)src);
| ^
As the code assumes correct alignment, add first a (void *) or (const
void *) castings, to avoid the warnings.
Fixes: 9484092baa ("eal/x86: optimize memcpy for AVX512 platforms")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
In rte_pktmbuf_mtod_offset macro, there is a casting from char * to type
't', which may cause cast-align warning when using strict cast align
flag with supporting gcc:
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
CFLAGS="-Wcast-align=strict" make V=1 -C examples/l2fwd clean static
main.c: In function 'l2fwd_mac_updating':
/dpdk/build/include/rte_mbuf_core.h:719:3: warning: cast increases
required alignment of target type [-Wcast-align]
719 | ((t)((char *)(m)->buf_addr + (m)->data_off + (o)))
| ^
/dpdk/build/include/rte_mbuf_core.h:733:32: note: in expansion of macro
'rte_pktmbuf_mtod_offset'
733 | #define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
| ^~~~~~~~~~~~~~~~~~~~~~~
As the code assumes correct alignment, add first a (void *) casting, to
avoid the warning.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In rte_vlan_insert there is a casting of rte_pktmbuf_prepend returned
value to (struct rte_ether_hdr *), which causes cast-align warning when
using strict cast align flag with supporting gcc:
gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
CFLAGS="-Wcast-align=strict" make V=1 -C examples/l2fwd clean static
In file included from main.c:35:
/dpdk/build/include/rte_ether.h:370:7: warning: cast increases required
alignment of target type [-Wcast-align]
370 | nh = (struct rte_ether_hdr *)
| ^
As the code assumes correct alignment, add first a (void *) casting, to
avoid the warning.
Fixes: c974021a59 ("ether: add soft vlan encap/decap")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This option should be prefixed with -- for consistency with others.
Fixes: a103a97e71 ("eal: allow user to override default mempool driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Migration to argparse was incomplete.
$ dpdk-pmdinfo.py -p $(which dpdk-testpmd)
Traceback (most recent call last):
File "/usr/bin/dpdk-pmdinfo.py", line 626, in <module>
main()
File "/usr/bin/dpdk-pmdinfo.py", line 596, in main
exit(scan_for_autoload_pmds(args[0]))
TypeError: 'Namespace' object does not support indexing
Fixes: 81255f27c6 ("usertools: replace optparse with argparse")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
When mempool had been created with RTE_MEMPOOL_F_NO_IOVA_CONTIG flag
but later populated with valid IOVA, RTE_MEMPOOL_F_NON_IO was unset,
while it should be kept. The unit test did not catch this
because rte_mempool_populate_default() it used was populating
with RTE_BAD_IOVA.
Keep setting RTE_MEMPOOL_NON_IO at an empty mempool creation
and add an assert for it in the unit test (remove the separate case).
Do not reset the flag if RTE_MEMPOOL_F_ON_IOVA_CONTIG is set.
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As suse version numbering is inconsistent to determine Linux kernel
API to be used. In this patch we check parameter of 'ndo_tx_timeout'
API directly from the kernel source. This is done only for suse build.
Bugzilla ID: 812
Cc: stable@dpdk.org
Signed-off-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Longfeng Liang <longfengx.liang@intel.com>
This API was introduced in 18.05, therefore removing
experimental tag to promote it to stable state
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
