This patch unifies QAT's raw dp api implementations
to the same enqueue/dequeue methods used in crypto operations.
The specific functions for different QAT generation are updated
respectively. The qat_sym_hw_dp.c is removed as no longer required.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch enable the op_build_request function in
qat_enqueue_op_burst, and the qat_dequeue_process_response
function in qat_dequeue_op_burst.
The op_build_request invoked in crypto build request op is based
on crypto operations setup'd during session init.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes qat_asym_pmd.c and integrates all the
functions into qat_asym.c. The unified/integrated asym crypto
pmd functions should make them easier to maintain.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes qat_sym_pmd.c and integrates all the functions into
qat_sym.c. The unified/integrated qat sym crypto pmd functions should
make them easier to maintain.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch reworks the asymmetric crypto data path
implementation in QAT driver. The changes include asymmetric
crypto data path separation for QAT hardware generations, and
code optimisation of the device capabilities declaration.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch introduce build request and dequeue op function
pointers to the qat queue pair implementation. The function
pointers are assigned during qat session generation based on input
crypto operation request.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Store and reuse workslot status for TT, GRP and HEAD status
instead of reading from GWC as reading from GWC imposes
additional latency.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
DPAA1 and DPAA2 platforms use SEC ERA 8 and 10 only.
Hence, code related to old SEC-ERA (1-7) is removed.
This patch removes code in SDAP and PDCP header related to these
ERA to simplify the codebase:
- Simplify logic using RTA_SEC_ERA_<> macro
- Remove era_2_sw_hfn_ovrd dedicated to RTA_SEC_ERA_2
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Pending queue also need to be adjusted while updating the number of
descriptors.
Fixes: a455fd869c ("common/cnxk: align CPT queue depth to power of 2")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tx command is prepared based on offloads enabled and stored in
Tx queue structure at tx_queue_setup phase.
In fastpath the command is copied from Tx queue to LMT line for
all the packets.
Since, the command contents are mostly constants we can move the
command preparation to fastpath and avoid accessing Tx queue
memory.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Riverhead boards support spreading traffic across the
specified number of queues without using indirections.
This mode is provided by a dedicated RSS context type.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
On Riverhead boards, the client can control how many entries
to have in the indirection table of an exclusive RSS context.
Provide the new parameter to clients and indicate its bounds.
Extend the API for writing the table to have the flexibility.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
In the existing code, "n" is hardly a clear name for that.
Use a clearer name to help future maintainers of the code.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
On Riverhead boards, clients can query the limit on how many
queues an RSS context may address. Put the capability to use.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Remove the incomplete cplusplus guard in internal headers.
Fixes: 7525ebd8eb ("common/mlx5: add glue functions on Windows")
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
While probing the device with unsupported class, the process should
fail because no appropriate driver was found. After traversing all
the drivers, an error value should be returned for the case.
In the previous implementation, zero value indicating probing success
was wrongly returned.
Fixes: ad435d3204 ("common/mlx5: add bus-agnostic layer")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Memory region (MR) lookup by address inside mempool MRs
was not accounting for the upper bound of an MR.
For mempools covered by multiple MRs this could return
a wrong MR LKey, typically resulting in an unrecoverable
TxQ failure:
mlx5_net: Cannot change Tx QP state to INIT Invalid argument
Corresponding message from /var/log/dpdk_mlx5_port_X_txq_Y_index_Z*:
Unexpected CQE error syndrome 0x04 CQN = 128 SQN = 4848
wqe_counter = 0 wq_ci = 9 cq_ci = 122
This is likely to happen with --legacy-mem and IOVA-as-PA,
because EAL intentionally maps pages at non-adjacent PA
to non-adjacent VA in this mode, and MLX5 PMD works with VA.
Fixes: 690b2a88c2 ("common/mlx5: add mempool registration facilities")
Cc: stable@dpdk.org
Reported-by: Wang Yunjian <wangyunjian@huawei.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Updates nix_dump and npa_dump to use plt_dump function.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Improve inbound inline error handling for CN9K in terms of
packet delivered to application for different kinds of errors.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
An errata exists whereby, in certain cases NIX may use an
incorrect QINT_IDX for SQ interrupts. As a result, the
interrupt may not be delivered to software, or may not be
associated with the correct SQ.
When NIX uses an incorrect QINT_IDX :
1. NIX_LF_QINT(0..63)_CNT[COUNT] will be incremented for
incorrect QINT.
2. NIX_LF_QINT(0..63)_INT[INTR] will be set for incorrect
QINT.
Fixes: ae06070901 ("common/cnxk: add NIX Tx queue management API")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
LF's error debug registers like NIX_LF_SQ_OP_ERR_DBG,
NIX_LF_MNQ_ERR_DBG, NIX_LF_SEND_ERR_DBG captures debug
info for an error detected during LMT operation or meta
enqueue or after meta enqueue granted respectively. HW
sets a valid bit when info is captured and SW is expected
to clear this valid bit by writing 1, else these registers
will show stale values of first interrupt when occurred and
will never update with subsequent interrupts.
Fixes: f6d567b03d ("common/cnxk: support NIX IRQ")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In shaper profiles cleanup, Klockwork static analyzer tool reports
infinite loop although existing loop condition is alright.
False positive may be due to tqh_first not checked in loop,
hence switching to FOREACH_SAFE to make Klockwork happy.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix shift offset for length disable flag in NIXX_AF_TL3X_SHAPE
register to be 24 instead of zero similar to other level SHAPE
registers. Also mask unused bits in adjust value.
Fixes: 0885429c30 ("common/cnxk: add NIX TM hierarchy enable/disable")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Support matching existence of specific extension headers
after RTE_FLOW_ITEM_TYPE_IPV6 item.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Support matching existence of VLAN after
RTE_FLOW_ITEM_TYPE_ETH and RTE_FLOW_ITEM_TYPE_VLAN items.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Add ROC API for parsing custom pre_l2 headers as raw data.
Only relative offset is supported and search and limit is
not supported with this raw item type.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Update meter algorithm in NIX's band profile structure.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds roc APIs roc_nix_cq_head_tail_get(), roc_nix_sq_head_tail_get()
to get tail and head of receive and transmit queue respectively.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use LMTST (Large atomic block store) burst as a performance optimization
when more than 15 pointers are requested to be freed.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When multicast promiscuous was being enabled it caused the unicast
promiscuous to be disabled. This fix resolves this by setting
NIX_RX_MODE_PROMISC when eth_dev->data->promiscuous is set, regardless.
Fixes: 325d79c00a ("net/cnxk: support all multicast")
Cc: stable@dpdk.org
Signed-off-by: Asaf Ravid <aravid@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for the imissed counter using the DevX API on Windows.
imissed is queried by creating a queue counter for the port, attaching
it to all created RQs and querying the "out_of_buffer" field.
If the counter cannot be created, imissed will always report 0.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The rte_kvargs_parse function parses the arguments
"key=value,key=value,..." string and return an allocated structure that
contains a key/value list.
It enables also to send a key without value and updates the values in
the following ways:
- "key=value,key,..." - value is updated as NULL.
- "key=value,key=,..." - value is updated as "" (empty string).
Mlx5 PMDs use this function to parse, but they don't support key without
value. They send the value as an argument to strtol function.
When strtol gets NULL as a parameter it cause a crash, when it gets ""
(empty string) it returns 0.
Adds a check that will prevent an argument in these formats, and returns
an error for it.
Fixes: 8520992403 ("common/mlx5: share memory related devargs")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The common drivers_probe function calls in a loop to all probe functions
for classes requested by the user. After it manages to probe them all,
it updates this on the device in the "classes_loaded" field.
If one of them fails, all those probed to it are remove using the
drivers_remove function. However, this function only releases the
classes in the "classes_loaded" field on the given device and misses the
newly probed classes.
This patch removes the condition from the release function, and ensures
that the caller function sends a more accurate parameter.
Fixes: 8a41f4decc ("common/mlx5: introduce layer for multiple class drivers")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
ROC changes to support setting channel mask for SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Wait for XAQ pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Wait for SQB pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
