Currently, there is no mechanism that allows the pipeline ports (in/out)
and table action handlers to override the default forwarding decision
(as previously configured per input port or in the table entry). The port
(in/out) and table action handler prototypes have been changed to allow
pipeline action handlers (port in/out, table) to remove the selected
packets from the further pipeline processing and to take full ownership
for these packets. This feature will be helpful to implement functions
such as exception handling (e.g. TTL =0), load balancing etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
virtio PMD could use IO port to configure the virtio device without
using UIO/VFIO driver in legacy mode.
There are two issues with previous implementation:
1) virtio PMD will take over the virtio device(s) blindly even if not
intended for DPDK.
2) driver conflict between virtio PMD and virtio-net kernel driver.
This patch checks if there is kernel driver other than UIO/VFIO managing
the virtio device before using port IO.
If legacy_virtio_resource_init fails and kernel driver other than
VFIO/UIO is managing the device, return 1 to tell the upper layer we
don't take over this device.
For all other IO port mapping errors, return -1.
Note than if VFIO/UIO fails, now we don't fall back to port IO.
Fixes: da978dfdc4 ("virtio: use port IO to get PCI resource")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
call pci_ioport_map (on x86) only if the pci device is not bound
to a kernel driver.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Use RTE_KDRV_NONE to indicate that kernel driver (other than VFIO/UIO) isn't
managing the device.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
positive return of devinit of pci driver means the driver doesn't support
this device.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
A new rte_lpm_config structure is used so LPM library will allocate
exactly the amount of memory which is necessary to hold application’s
rules.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch extend next_hop field from 8-bits to 24-bits in LPM library
for IPv4.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Add introductions on how to enable Vector FM10K Rx/Tx functions,
the preconditions and assumptions on Rx/Tx configuration parameters.
The new content also lists the limitations of vector, so app/customer
can do better to select best Rx/Tx functions.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch documents that the statistics of fm10k based NICs must be
read regularly in order to avoid an undetected 32 bit integer-overflow.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds a note to the ixgbe PMD guide, stating
the minimum time that statistics must be polled from
the hardware in order to avoid register values becoming
saturated and "sticking" to the max value.
Reported-by: Jerry Zhang <jerry.zhang@intel.com>
Tested-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Move the structure ``rte_eth_fdir_masks`` change announcement from ABI
to API in release notes.
Fixes: 1409f127d7 (ethdev: fix byte order consistency of flow director)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
There was an ABI change in the release 16.04.
Fixes: fb76dd26a3 ("cmdline: increase command line buffer")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
There was an ABI change and more are coming in the release 16.04.
Fixes: a9963a86b2 ("ethdev: increase RETA entry size")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch adds a new function to the EAL API:
int rte_eal_primary_proc_alive(const char *path);
The function indicates if a primary process is alive right now.
This functionality is implemented by testing for a write-
lock on the config file, and the function tests for a lock.
The use case for this functionality is that a secondary
process can wait until a primary process starts by polling
the function and waiting. When the primary is running, the
secondary continues to poll to detect if the primary process
has quit unexpectedly, the secondary process can detect this.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
This patch fixes a race-condition when a primary and
secondary process simultaneously probe PCI devices.
This is implemented by moving the rte_eal_mcfg_complete()
function call in rte_eal_init() until after rte_eal_pci_probe().
The memory mapping of PCI device in the secondary process *must*
happen after the primary has finished doing the mapping as it
relies on information written by the primary.
The end result is that the secondary process waits longer,
until the primary has completed its PCI probing, and then
notifies the secondary process.
This race-condition became visible during the development of
a function that allows a secondary process to be polling until
a primary process exists. The secondary would then probe PCI
devices at the same time, causing an error during rte_eal_init()
Linux EAL:
Fixes: 916e4f4f4e ("memory: fix for multi process support")
BSD EAL:
Fixes: 764bf26873 ("add FreeBSD support")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
It deprecates sys files of 'extended_tag' and
'max_read_request_size' which was not documented.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Remove pci configuration of 'extended tag' and 'max read request
size', as they are not required by all devices and it lets PMD to
configure them if necessary.
In addition, 'pci_config_space_set()' is deprecated.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
PCIe feature of 'Extended Tag' is important for 40G performance.
It adds its enabling during each port initialization, to ensure
the high performance.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch removes double newlines between functions
in keepalive.[hc] aligning it with the rest of DPDK.
Fixes: 75583b0d1e ("eal: add keep alive monitoring")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch sets a timestamp on each lcore when it is registered
for keepalive. This causes the first values read by the monitor
to show time since the core was registered, instead of the delta
between 0 and the timestamp counter.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch fixes some mismatches between the keepalive code
and the docs. Struct names, and descriptions are not in line
with the codebase.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
igb_iuo has no maintainer, claim responsibility for igb_uio
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This was working fine because addresses of two structs are same:
struct A {
struct B b;
} a;
As above sample "a" and "b" has same address.
Now casting private data back to the correct struct type, to the one
stored.
Fixes: af75078fec ("first public release")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add known issue about DPDK not compiling on some CPUs
with clang versions older than 3.7.0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Announce that Malicious Driver Detection is not supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
MANY references in the sample applications user guide are wrong because
they are hard-coded and section numbers have changed over the time.
This patch changes thoses references to dynamic ones, in this way if
section numbers change the reference get updated automatically.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
This patch adds link identification feature to packet framework. To
identify a link, user can use both existing port-mask option, or specify
PCI device in every LINK section in the configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds CPU utilization measurement and idle cycle rate
computation to packet framework. The measurement is done by measuring
the cycles spent while a thread pulls zero packet from RX queue. These
cycles are treated as idle cycles (or headroom). A CLI command is added
to display idle cycle rate of specific thread. The CLI command format is
shown as following:
t <thread_id> headroom
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When compiling for i686 targets compilation could fail
if the 32bit libc6-dev package is not installed. The
gcc-multilib packages is a meta-package that will pull
in the necessary dependencies, making setup easier for
beginners.
Reported-by: Weichun Chen <weichunx.chen@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Previously, max_socket was set to the highest numbered socket with
an enabled lcore. The intent is to set it to the highest socket
regardless of it being enabled.
Fixes: 7acf894d07 ("app/testpmd: detect numa socket count")
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When using testpmd, sometimes we forget the right order of port_id and
vid in "tx_vlan set (port_id) vlan_id[, vlan_id_outer]\n" command, and
input "tx_vlan set 51 0", we'll get a strange prompt saying "Error, as
QinQ has been enabled.".
In cmd_tx_vlan_set_parsed function, the first thing we do is checking
the port's vlan_offload capability, rather than checking validity of the
port_id, therefore if it's an invalid port_id we'll get the above wrong
message. We should always make sure that we get a valid port_id before
we do other things.
It's the similar issue for cmd_tx_vlan_set_qinq_parsed function.
Fixes: 92ebda07ee ("app/testpmd: add qinq stripping and insertion")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
armv8.1 adds support for new atomic instructions.
Linux kernel v4.3 onwards, the presence of atomic instruction
support can detect through HWCAP_ATOMICS
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
CONFIG_RTE_LIBRTE_EAL_*APP can be replaced by CONFIG_RTE_EXEC_ENV_*APP.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
In order to cleanup the configuration files some and reduce
the number of duplicate configuration information. Add a new
file called common_base which contains just about all of the
configuration lines in one place. Then have the common_bsdapp,
common_linuxapp files include this one file. Then in those OS
specific files add the delta configuration lines.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Until now, the generic 64-bit flag was used only for ARM or Linux,
and was not defined for BSD environment.
Fixes: d05e7115f4 ("mem: support layout of IBM Power")
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Fixed issue of byte order in ethdev library that the structure
for setting fdir's mask and flow entry is inconsist and made
inputs of mask be in big endian.
Fixes: 2d4c1a9ea2 ("ethdev: add new flow director masks")
Fixes: 76c6f89e80 ("ixgbe: support new flow director masks")
Reported-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The tbl8 and tbl24 structures were essentially identical except for
slightly different names for one or two fields. Merge these two
structures into a single structure definition.
Two fields have been renamed as part of this change: the
"ext_entry" field in the tbl24 has been renamed to "valid_group" to match
the tbl8 value to make the merge easier, and the "tbl8_gindex" field has
been renamed to "group_idx". The "valid_group" field now serves two
purposes: in a tbl8 it indicates if the group, i.e. the tbl8, is valid,
and in a tbl24, it indicates if the "group_idx" is valid, i.e. whether
the value is a next_hop or a tbl8 index. [The name "group_idx" was used
to make this latter link between the fields clearer]
Suggested-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Macros RTE_MBUF_DATA_DMA_ADDR and RTE_MBUF_DATA_DMA_ADDR_DEFAULT
are defined in each PMD driver file. Convert macros to inline
functions and move them to common lib/librte_mbuf/rte_mbuf.h file.
PMD drivers include rte_mbuf.h file directly/indirectly hence no
additioanl header file inclusion is necessary.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
cmdline_parse_*.h headers use struct cmdline_token_hdr /
cmdline_parse_token_hdr_t which is defined in cmdline_parse.h, but
do not include it, forcing manual inclusion.
This commit includes cmdline_parse.h in all cmdline_parse_*.h.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
