In the case when CoS classification is disabled, driver was iterating
looking for only lossy profiles as that is what is expected to be used
for regular NIC operations. But in certain custom profiles, there were
no lossy profiles configured, only lossless profiles instead.
To handle such cases, it is better to fallback to using the first valid
profile.
Fixes: 698aa7e95325 ("net/bnxt: add code to determine the Tx COS queue")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for LRO for adapters based on Thor (BCM57508).
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When an application issues flow validate, we free the temporary
filter that is created. But the vnic is not freed up. This can
potentially interfere with subsequent flow creation. So free the vnic.
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are currently creating only outer DMAC filters.
Create SMAC and inner DMAC filters using HWRM_CFA_L2_FILTER_ALLOC.
For this the HWRM_CFA_L2_FILTER_ALLOC has already been updated.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not subscribing to link speed change notification.
This patch addresses that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
On Thor, direct access to PTP registers (via GRC) is not supported.
Driver must use HWRM to access the timestamp information.
Vectorized Rx/Tx cannot be enabled if RTE_LIBRTE_IEEE1588=y.
Remove the PTP flags handling code from the vector Rx path.
Add support to read tx timestamp value and the time from the
timesync clock.
On Thor, Rx timestamps are provided directly in the Rx completion
records to the driver. Only 32 bits of the timestamp is present in
the completion. Driver needs to read the current 48 bit free running
timer using the HWRM_PORT_TS_QUERY command and combine the upper
16 bits from the HWRM response with the lower 32 bits in the
Rx completion to produce the 48 bit timestamp for the Rx packet.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to perform FW_RESET. When the driver detects error in FW,
it has to initiate the recovery by resetting the cores. FW advertise
the method to do a core reset, reset register offsets and values
to perform reset in response of HWRM_ERROR_RECOVERY_QCFG command.
There are 2 ways to recover from the error.
1. Master function issues core resets to recover from error.
2. Master function detects chimp dead condition and notify the Kong
processor about the chimp dead case through FW_RESET HWRM command.
Kong Processor send an RESET_NOTIFY async event with
REASON_CODE_FW_EXCEPTION_FATAL to all the PF’s/VF’s that
chimp is dead and it is going to reset the chimp.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Advertise HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_ERROR_RECOVERY_SUPPORT flag
in the FUNC_DRV_RGTR command.
2. request for the async event ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY
in the FUNC_DRV_RGTR command.
3. handle the async event EVENT_ID_ERROR_RECOVERY from FW.
Error recovery support will be used by firmware only if all the driver
instances support error recovery process.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
In Driver initiated error recovery process, driver has to know about
the registers offset and values to initiate FW reset. The HWRM command
HWRM_ERROR_RECOVERY_QCFG is used to obtain all the registers and values
required to initiate FW reset. This command response includes
FW heart_beat register, health status register, Error counter register,
register offsets and values to do chip reset if firmware crashes and
becomes unresponsive.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Use latest firmware API to inform firmware about IF state changes.
Firmware has the option to clean up resources during IF down and
to require the driver to reserve resources again during IF up.
During port start, HWRM_FUNC_DRV_IF_CHANGE command response
flags indicates that firmware has reset. Add logic to re-probe
the firmware and re-setup resources.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When the FW upgrade is initiated the current instance
of FW issues a HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RESET_NOTIFY
async notification to the driver. On receiving this notification,
the PMD shall quiesce itself and poll on the HWRM_VER_GET FW
command at regular intervals.
Once the VER_GET command succeeds, the driver should go through
the rediscovery process and re-initialize the device.
Also register with FW for the reset notify async event.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
This commit enables the creation of a dedicated completion
ring for asynchronous event handling instead of handling these
events on a receive completion ring.
For the stingray platform and other platforms needing tighter
control of resource utilization, we retain the ability to
process async events on a receive completion ring.
For Thor-based adapters, we use a dedicated NQ (notification
queue) ring for async events (async events can't currently
be received on a completion ring due to a firmware limitation).
Rename "def_cp_ring" to "async_cp_ring" to better reflect its
purpose (async event notifications) and to avoid confusion with
VNIC default receive completion rings.
Allow rxq 0 to be stopped when not being used for async events.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
VF driver should not fail probe if the host PF driver has not assigned
any MAC address for the VF. It should generate a random MAC address and
configure the MAC and then continue probing the device.
Fixes: be160484a48d ("net/bnxt: check if MAC address is all zeros")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The MTU value of a port can be (re)configured out-of-band.
FW will be returning this configured MTU as part of func_qcfg cmd.
Driver to use this value during load time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Make changes needed to support rss for thor-based controllers.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This commit adds support to the bnxt PMD for devices
based on the BCM57508 "thor" Ethernet controller.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support extended port statistics like COS bytes,
packets, XON -> XOFF and XOFF -> XON transitions in Tx and Rx path.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Packets destined to the to-be-stopped queue should not be dropped
(neither in HW nor in the driver), so re-program the RSS Table without
this queue on stop and add it back to the table on start unless it
is a Representor VF.
Since 0th entry is used for default ring, use fw_grp_id + 1 to change
the RSS table population logic by programming valid IDs instead of the
default zeroth entry in case of an invalid fw_grp_id.
Destroy and recreate the trio of Rx rings(compl, Rx, AG) every time in
start so that HW is in sync with software.
Fixes: 9b63c6fd70e3 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the resource requirement of a VF is more than what is allotted
to it by the FW, a VF can request to reallocate some of the resources.
This is possible only when the NIC is running the Resource Manager aware
CHiMP FW.
If necessary, calculate Tx and Rx ring count using the new RM API.
Otherwise use the Tx and Rx ring count as-is. Update the cp ring count
based on the Tx and Rx ring count.
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In order to save completion resource, use the first completion ring from
PF or VF as the default completion ring for async event & HWRM forward
response handling. Add bnxt_hwrm_set_async_event_cr() to set
async_event_cr for either PF or VF.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The hwrm_queue_qportcfg command has been extended to determine
the COS queue that a Tx ring needs to use. This patch adds code
to determine the information from the FW and use it while
creating the Tx rings.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently this is implemented entirely in the PMD as there is no
explicit support in the HW. Re-program the RSS Table without this queue
on stop and add it back to the table on start.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Register for async events from the FW.
New events we are registering for include Link speed config changes,
PF driver unload and VF config change. Also log a message when the
async event arrives on the completion ring.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implemented the 'time_sync' related APIs for supporting the PTP
protocol.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for get/set_eeprom, get_eeprom_length dev_ops.
Defined the structures required to get/set the eeprom length/data
in hsi_struct_defs hdr file along with implementation.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While gathering per queue stats, we are overwriting some of the
stats. This causes some of the counters in xstats to be incorrect.
Fixes: 577d3dced0dc ("net/bnxt: refactor the query stats")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to avoid automatic clearing of VF stats on a function
reset or a stat context free.
Add rte_pmd_bnxt_set_vf_persist_stats() PMD specific API.
Fixes: dd46c6bbd5d6 ("net/bnxt: support get and clear VF specific stats")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We used the default as a work-around for the 4-byte MTU VNICs,
but we filter those out now. So fix the calculation of VNICs
accordingly.
Fixes: ff63ebbb67a7 ("net/bnxt: determine the Rx status of VF")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to configure the VF L2 Rx settings.
The per VF setting is maintained in bnxt_child_vf_info.l2_rx_mask
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
When setting the default VLAN, avoid setting it to the current value.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to determine the Rx status of a VF.
It adds the rte_pmd_bnxt_get_vf_rx_status call, which calculates
the VNIC count of the function to get the Rx status.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to
1) enable VF MAC anti spoof.
2) QOS configuration for specified VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use hwrm_stat_ctx_query command to query statistics
Using hwrm_stat_ctx_query command will allow polling
the statistics from hardware instead of using the current push
model from the hardware which does a DMA of the stats to the host
at fixed intervals.
2) Use the rx_mbuf_alloc_fail to track mbuf alloc failures.
3) We were wrongly incrementing hwrm_cmd_seq in bnxt_hwrm_stat_clear
and bnxt_hwrm_stat_ctx_alloc functions. This patch fixes that.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to enable and disable LRO
To support this feature, the driver creates an aggregator ring.
When the hardware starts doing LRO, it sends a tpa_start completion.
When the driver receives a tpa_end completion, it indicates that the
LRO chaining is complete.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to modify MTU using the set_mtu dev_op.
To support frames > 2k, the PMD creates an aggregator ring.
When a frame greater than 2k is received, it is fragmented
and the resulting fragments are DMA'ed to the aggregator ring.
Now the driver can support jumbo frames upto 9500 bytes.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to get and reset xstats dev_ops
dev_ops added:
xstats_get, xstats_get_name, xstats_reset
HWRM commands added:
hwrm_port_qstats, hwrm_port_clr_stats
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
