The following error hits if host cc compiler is clang(default one in most
linux distributions) and the cross compiler is gcc.
The root cause is: the hybride compilers add the warning options to the
meson project as project arguments, which apply for both host compiling and
cross compiling. But some options such as '-Wno-format-truncation' are not
supported nor recognized by clang, so they have to be removed from the
project arguments for the host compiler to run smoothily and added back as
cflags for the cross compiler to compile for cross source files.
The fix is remove unrecognized warning options from the meson project
arguments shared by gcc and clang, as add them specifically for gcc or
clang as cflags.
[265/893] Compiling C object
'buildtools/pmdinfogen/pmdinfogen@exe/pmdinfogen.c.o'. warning: unknown
warning option '-Wno-format-truncation' [-Wunknown-warning-option]
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is to fix the unnecessary warning output, it is not consistent with
the configurations of other platforms.
WARNING: Cross file does not specify strip binary, result will not be
stripped.
Fixes: e53a5299d2 ("build: support vendor specific ARM cross builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Most crypto PMDs do not have a limitation
of the number of the sessions that can be handled
internally. The value that was set before was not
actually used at all, since the sessions are created
at the application level.
Therefore, this value is not parsed from the initial
crypto parameters anymore and it is set to 0,
meaning that there is no actual limit.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Registered new dynamic logtype for driver and
replaced GCM_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_GCM_LOG macro, which uses the new logtype.
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced ZUC_LOG_ERR and CDEV_LOG_ERR
with the new ZUC_LOG macro, which uses the new logtype.
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced KASUMI_LOG_ERR and CDEV_LOG_ERR
with the new KASUMI_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced MB_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_MB_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced OPENSSL_LOG_ERR and CDEV_LOG_ERR macros with
new OPENSSL_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced CS_LOG_ERR and RTE_LOG macros with
new CR_SCHED macro, which uses the new logtype.
Signed-off-by: Hari Kumar <hari.kumarx.vemula@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For cryptodev dynamic logging, conditional compilation of
debug logs is not actually required.
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.
The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).
Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For all trace on the data-path move to dynamic logging.
Add new QAT_DP_LOG macro to separate from non-dp trace.
Use the overall RTE_LOG_DP_LEVEL to override and compile out
debug data-path trace.
Add "unlikely" in two appropriate error checks.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
For all trace not on the data-path move to dynamic logging.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Removed INIT_FUNC trace and other unused macros.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
With this change, DPAA and DPAA2 configuration compiled applications
are interoperable without any impact on the functional behavior.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
When we check for libbsd we were just checking for the library itself.
However, on some distros, e.g. CentOS, libbsd will be found even though
it's not usable by DPDK as it's missing the string header. Therefore we
should check for both the library and the header file.
Fixes: 5364de644a ("eal: support strlcpy function")
Signed-off-by: Bruce Richarson <bruce.richardson@intel.com>
Reported-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Introduce rte_bpf_elf_load() function to provide ability to
load eBPF program from ELF object file.
It also adds dependency on libelf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.
The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.
Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
This patch adds common code for the crypto adapter to support
SW and HW based transfer mechanisms. The adapter uses an EAL
service core function for SW based packet transfer and uses
the eventdev PMD functions to configure HW based packet
transfer between the crypto device and the event device.
This patch also adds adapter to the meson build system &
updates the necessary makefile & map file.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
IXGBE vector PMD was re-enabled for 32 bits, but only for gcc.
This commit enables it for icc too.
Fixes: e6672d2f0f ("net/ixgbe: enable ixgbe vector PMD for i686")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently eal vfio framework binds vfio group fd to the default
container fd during rte_vfio_setup_device, while in some cases,
e.g. vDPA (vhost data path acceleration), we want to put vfio group
to a separate container and program IOMMU via this container.
This patch extends the vfio_config structure to contain per-container
user_mem_maps and defines an array of vfio_config. The next patch will
base on this to add container API.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the support for dynamic logging in dpaa_sec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Auth operations can be performed on CPU without offloading
to CCP if CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH is enabled in
DPDK configuration. CCP PMD skip offloading auth operations
to hardware engines and perform them using openssl APIs.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
The make based build system has crc+crypto instruction
support for the default arm64 build.
http://dpdk.org/browse/dpdk/tree/mk/machine/armv8a/rte.vars.mk#n31
This patch fixes the disparity with meson build flags for armv8.
As a bonus, This patch fixes the following errors with
ip_pipeline example application.
Assembler messages:
Error: selected processor does not support `crc32cx w3,w3,x0'
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add librte_rawdev to the meson build of DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Meson reports the toolchain using cc.get_id and we can set RTE_TOOLCHAIN,
RTE_TOOLCHAIN_X in dpdk_conf so that it can be used by both x86 and arm.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds the logic that is shared by all event timer adapter
drivers; the common code handles instance allocation and some
initialization.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole card was represented as a single port).
With new NFB-200G2QL card, this is no longer viable.
Since there is no fixed mapping between the queues and Ethernet ports,
and since a single card can be represented as two ports in DPDK,
there is no way of telling which (if any) physical ports should be
associated with individual ports in DPDK.
This is also described in documentation in more detail.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Signed-off-by: Jan Remes <remes@netcope.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The strncpy function is error prone for doing "safe" string copies, so
we generally try to use "snprintf" instead in the code. The function
"strlcpy" is a better alternative, since it better conveys the
intention of the programmer, and doesn't suffer from the non-null
terminating behaviour of it's n'ed brethern.
The downside of this function is that it is not available by default
on linux, though standard in the BSD's. It is available on most
distros by installing "libbsd" package.
This patch therefore provides the following in rte_string_fns.h to ensure
that strlcpy is available there:
* for BSD, include string.h as normal
* if RTE_USE_LIBBSD is set, include <bsd/string.h>
* if not set, fallback to snprintf for strlcpy
Using make build system, the RTE_USE_LIBBSD is a hard-coded value to "n",
but when using meson, it's automatically set based on what is available
on the platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The old RTE_LOG_LEVEL has been replaced by RTE_DP_LOG_LEVEL and
is not used anywhere in the current source tree.
It is a merge leftover.
Fixes: 43e9f17ce7 ("log: remove log level config option")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some comments are not relevant in a config which only overrides
the default config.
The option CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER is already disabled
by default so it can be removed from this file.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
1) Add native PN option '-march=native' to allow automatic detection.
Set 'arm_force_native_march' to 'true' in config/arm/meson.build
to use native PN option.
2) Add implementer_pn option for part num selection in cross compile
3) Add known Arm cortex PN support
4) Add known implementers' IDs (use generic flags/archs by default)
5) Sync build options with config/common_armv8a_linuxapp
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This commit enables dynamic logging with the SW pmd.
The string "pmd.event.sw" is used to change the verbosity
of the logging output, as per the newly defined log naming.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Add various vendor specific cross build targets.
This can be verified by using linaro toolchain and running
meson build --cross-file config/arm/arm64_<cpu>_<platform>_<compiler>
In future more cross build targets can be added.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add files to enable compiling for ARM native/cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.
meson arm-build --cross-file aarch64_cross.txt
ninja -C arm-build
where aarch64_cross.txt contained the following
[binaries]
c = 'aarch64-linux-gnu-gcc'
cpp = 'aarch64-linux-gnu-cpp'
ar = 'aarch64-linux-gnu-ar'
[host_machine]
system = 'linux'
cpu_family = 'aarch64'
cpu = 'armv8-a'
endian = 'little'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
DPDK has an optional dependency on libnuma, so manage that through the
build system, by dynamically detecting the presence of the needed library
and header files. Since this library is used by both EAL and vhost, check
for the presence at the top level in the config directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Since a number of libraries depend on the maths lib, as well as adding it
to the project args, we also need to add it to the pkgconfig file args.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Support compiling the FreeBSD kernel modules using meson and ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Previous code only added in AVX, and a few other non-SSE flags to the
compile-time cpuflags because all SSE instruction set levels are now
required for an x86 build. However, some apps may still be checking for the
existing SSE ones in the legacy build system, so add them here for
completeness and compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A subset of the dpdk headers are arch-dependent, but have common names
and thus cause a clash in a multiarch installation.
For example, rte_config.h is different for each target.
Add a "include_subdir_arch" option to allow a user to specify a
subdirectory for arch independent headers to fix multiarch support.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add the af_packet, null, pcap and ring PMDs to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Support building the EAL with meson and ninja. This involves a number of
different meson.build files for iterating through all the different
subdirectories in the EAL. The library itself will be compiled on build but
the header files are only copied from their initial location once "ninja
install" is run. Instead, we use meson dependency tracking to ensure that
other libraries which use the EAL headers can find them in their original
locations.
Note: this does not include building kernel modules on either BSD or Linux
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
To build with meson and ninja, we need some initial infrastructure in
place. The build files for meson always need to be called "meson.build",
and options get placed in meson_options.txt
This commit adds a top-level meson.build file, which sets up the global
variables for tracking drivers, libraries, etc., and then includes other
build files, before finishing by writing the global build configuration
header file and a DPDK pkgconfig file at the end, using some of those same
globals.
From the top level build file, the only include file thus far is for the
config folder, which does some other setup of global configuration
parameters, including pulling in architecture specific parameters from an
architectural subdirectory. A number of configuration build options are
provided for the project to tune a number of global variables which will be
used later e.g. max numa nodes, max cores, etc. These settings all make
their way to the global build config header "rte_build_config.h". There is
also a file "rte_config.h", which includes "rte_build_config.h", and this
file is meant to hold other build-time values which are present in our
current static build configuration but are not normally meant for
user-configuration. Ideally, over time, the values placed here should be
moved to the individual libraries or drivers which want those values.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
This patch enables the NXP DPAA & DPAA2 drivers for
ARMV8 targets. They can be used with standard armv8 config
with command line mempool argument or newly introduced
platform mempool internal registration mechanism.
Note that the dpaa(x) specific config files are still preserved
to continue customer support. They also contain some of the ARM
performance tuning flags. e.g the default ARM cache size of 128
is not optimal for NXP platforms.
However, these configs will eventually be removed once a dynamic
mechanisms are developed to detect the performance settings.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
On thunderx and octeontx, ring_perf_autotest and
ring_pmd_perf_autotest test shows better performance
when disabling CONFIG_RTE_RING_USE_C11_MEM_MODEL.
On the other hand, Enabling CONFIG_RTE_RING_USE_C11_MEM_MODEL
shows better performance on thunderx2.
Since thunderx2 is using the default armv8 config,
no particular change is required.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch is to support C11 memory model barrier in librte_ring.
There are 2 barrier implementation options in librte_ring (suggested
by Jerin).
1. use rte_smp_rmb
2. use load_acquire/store_release(refer to [1]).
The reason why providing 2 options is the performance benchmark
difference in different arm machines, refer to [2].
CONFIG_RTE_RING_USE_C11_MEM_MODEL is provided, and by default it is "n"
on any architectures and only "y" on arm64 so far.
[1] https://github.com/freebsd/freebsd/blob/master/sys/sys/buf_ring.h#L170
[2] http://dpdk.org/ml/archives/dev/2017-October/080861.html
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
No config option changed, added or removed.
Only reshuffle PMD config options mostly to help new PMDs where to put
their new config option.
Ordered as physical, paravirtual and virtual groups. Alphabetical order
within a group.
Also tried to group vendor devices together which breaks alphabetical
order in some places.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
This patch adds support for handling run-time driver arguments.
We have removed config option for per VF Tx switching and added
a run-time argument vf_txswitch. By default, the VF Tx switching is
enabled however it can be disabled using run-time argument.
Sample usage to disable per port VF Tx switching is something like...
-w 05:00.0,vf_txswitch=0 -w 05:00.1,vf_txswitch=0
Fixes: 1282943aa0 ("net/qede: fix default config option")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Two macros were defined in cryptodev, to serve the same
purpose: RTE_CRYPTODEV_NAME_LEN (in the config file) and
RTE_CRYPTODEV_NAME_MAX_LEN (in the rte_cryptodev.h file).
Since the second one is part of the external API,
the first one has been removed, avoiding duplications.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
This patch provides an option to do rte_memcpy() using 'restrict'
qualifier, which can induce GCC to do optimizations by using more
efficient instructions, providing some performance gain over memcpy()
on some ARM64 platforms/enviroments.
The memory copy performance differs between different ARM64
platforms. And a more recent glibc (e.g. 2.23 or later)
can provide a better memcpy() performance compared to old glibc
versions. It's always suggested to use a more recent glibc if
possible, from which the entire system can get benefit. If for some
reason an old glibc has to be used, this patch is provided for an
alternative.
This implementation can improve memory copy on some ARM64
platforms, when an old glibc (e.g. 2.19, 2.17...) is being used.
It is disabled by default and needs "RTE_ARCH_ARM64_MEMCPY"
defined to activate. It's not always proving better performance
than memcpy() so users need to run DPDK unit test
"memcpy_perf_autotest" and customize parameters in "customization
section" in rte_memcpy_64.h for best performance.
Compiler version will also impact the rte_memcpy() performance.
It's observed on some platforms and with the same code, GCC 7.2.0
compiled binary can provide better performance than GCC 4.8.5. It's
suggested to use GCC 5.4.0 or later.
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
OPDL ring is the core infrastructure of OPDL PMD. OPDL ring library
provide the core data structure and core helper function set. The Ring
implements a single ring multi-port/stage pipelined packet distribution
mechanism. This mechanism has the following characteristics:
• No multiple queue cost, therefore, latency is significant reduced.
• Fixed dependencies between queue/ports is more suitable for complex.
fixed pipelines of stateless packet processing (static pipeline).
• Has decentralized distribution (no scheduling core).
• Packets remain in order (no reorder core(s)).
* Update build system to enable compilation.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
- full test suite for bbdev
- test App works seamlessly on all PMDs registered with bbdev
framework
- a python script is provided to make our life easier
- supports execution of tests by parsing Test Vector files
- test Vectors can be added/deleted/modified with no need for
re-compilation
- various tests can be executed:
(a) Throughput test
(b) Offload latency test
(c) Operation latency test
(d) Validation test
(c) Sanity checks
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Unlike every other DPDK application's compilation, proc_info's
compilation cannot be turned off on Linux. Fix it by adding a
config option to base linuxapp config.
Fixes: 22561383ea ("app: replace dump_cfg by proc_info")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Remove RTE_LOG_LEVEL config option, use existing RTE_LOG_DP_LEVEL config
option for controlling datapath log level.
RTE_LOG_LEVEL is no longer needed as dynamic logging can be used to
control global and module specific log levels.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Make max vfio groups compile-time configurable so that platforms can
choose vfio group limit.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Without this patch, the number of queues per i40e VF is set to 4
by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 in config/common_base.
It is a fixed value determined at compile time and can't be changed
at run time.
With this patch, the number of queues per i40e VF can be determined
at run time. For example, if the PCI address of an i40e PF is
aaaa:bb.cc, with the EAL parameter -w aaaa:bb.cc,queue-num-per-vf=8,
the number of queues per VF created from this PF is set to 8.
If there is no "queue-num-per-vf" setting in EAL parameters, it uses
the default value of 4. And if the value after the "queue-num-per-vf"
is invalid, it will also use the default value. The valid values can
be 1, 2, 4, 8, or 16.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This driver is mostly like others with slightly different logging
macros. The semantics were retained, with some minor reformatting.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This workaround was needed to properly handle device removal with old
Mellanox OFED releases that are not supported by this PMD anymore.
Starting from rdma-core v16 this removal issue shouldn't happen when
setting MLX4_DEVICE_FATAL_CLEANUP environment variable to 1.
Set the aforementioned variable to 1.
Reverts: 5f4677c6ad ("net/mlx4: workaround verbs error after plug-out")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Provide a knob to control per-VF Tx switching feature by adding a config
option, CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH. By default, it will be kept
in disabled state for better performance with small sized frames.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
RTE_MRVL_MUSDK_DMA_MEMSIZE can be removed from DPDK configuration
as it's no longer used as a synchronization point for net and crypto
mrvl pmds.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Currently, enabling assertion have to set CONFIG_RTE_LOG_LEVEL to
RTE_LOG_DEBUG. CONFIG_RTE_LOG_LEVEL is the default log level of control
path, RTE_LOG_DP_LEVEL is the log level of data path. It's a little bit
hard to understand literally that assertion is decided by control path
LOG_LEVEL, especially assertion used on data path.
On the other hand, DPDK need an assertion enabling switch w/o impacting
log output level, assuming "--log-level" not specified.
Assertion is an important API to balance DPDK high performance and
robustness. To promote assertion usage, it's valuable to unhide
assertion out of COFNIG_RTE_LOG_LEVEL.
In one word, log is log, assertion is assertion, debug is hot pot :)
Rationale of this patch is to introduce an dedicate switch of
assertion: RTE_ENABLE_ASSERT
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.
Related documents are removed or updated, and bump the eal library
version.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter and cuckoo filter) structure.
In general, the Membership library is a data structure that provides a
"set-summary" and responds to set-membership queries of whether a
certain element belongs to a set(s). A membership test for an element
will return the set this element belongs to or not-found if the
element is never inserted into the set-summary.
The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.
This patch adds the main API definition.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The kernel patch was merged to support pci resource mapping.
https://patchwork.kernel.org/patch/9677441/
So enable igu_uio in the default arm64 configuration.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch also adds configuration necessary for compilation of DPAA
Mempool driver into the DPAA specific config file.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=dpaa is also configured to allow
applications to use DPAA mempool as default.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The patch simplifies DPDK applications analysis for developers which use
Intel® VTune Amplifier.
The empty cycles are such iterations that yielded no RX packets. As far as
DPDK is running in poll mode, wasting cycles is equal to wasting CPU time.
Tracing such iterations can identify that device is underutilized. Tracing
empty cycles becomes even more critical if a system uses a lot of Ethernet
ports.
The patch gives possibility to analyze empty cycles without changing
application code. All needs to be done is just to reconfigure and rebuild
the DPDK itself with CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS
enbled. The important thing here is that this does not affect DPDK code.
The profiling code is not being compiled if user does not specify config
flag.
The patch provides common way to inject RX queues profiling and VTune
specific implementation.
Signed-off-by: Ilia Kurakin <ilia.kurakin@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Current mlx4 OFED version has bug which returns error to
ibv destroy functions when the device was plugged out, in
spite of the resources were destroyed correctly.
Hence, failsafe PMD was aborted, only in debug mode, when
it tries to remove the device in plug-out process.
The workaround added option to replace all claim_zero
assertions with debugging messages, by the way, this option
affects non ibv destroy assertions.
DPDK 18.02 release should work with Mellanox OFED-4.2 which will
include the verbs fix to this bug, then, this patch can
be removed.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Earlier bonding pmd was disabled in default config for ppc64le.
Hence, removing it as it has been verified.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK)
application that allows exercising various eventdev use cases. This
application has a generic framework to add new eventdev based test cases
to verify functionality and measure the performance parameters of DPDK
eventdev devices.
This patch adds the skeleton of the dpdk-test-eventdev application.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Moved all common defines from defconfig_arm64-armv8a-linuxapp-gcc
to common_armv8a_linuxapp.
Created new config arm64-armv8a-linuxapp-clang which adds the
clang support to armv8a.
Now defconfigs arm64-armv8a-linuxapp-gcc/clang contain only the
CONFIG_RTE_TOOLCHAIN* defines and all other common defines are
inherited from common_armv8a_linuxapp.
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
* Removed setting CONFIG_RTE_SCHED_VECTOR=n from armv8a config
so that the setting from common_base is taken as the default
setting for armv8a
* Verified the changes with sched_autotest unit test case
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
It is safe to enable LIBRTE_VHOST_NUMA by default for all
configurations where libnuma is already a default dependency.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Currently EAL allocates hugepages one by one not paying attention
from which NUMA node allocation was done.
Such behaviour leads to allocation failure if number of available
hugepages for application limited by cgroups or hugetlbfs and
memory requested not only from the first socket.
Example:
# 90 x 1GB hugepages availavle in a system
cgcreate -g hugetlb:/test
# Limit to 32GB of hugepages
cgset -r hugetlb.1GB.limit_in_bytes=34359738368 test
# Request 4GB from each of 2 sockets
cgexec -g hugetlb:test testpmd --socket-mem=4096,4096 ...
EAL: SIGBUS: Cannot mmap more hugepages of size 1024 MB
EAL: 32 not 90 hugepages of size 1024 MB allocated
EAL: Not enough memory available on socket 1!
Requested: 4096MB, available: 0MB
PANIC in rte_eal_init():
Cannot init memory
This happens beacause all allocated pages are
on socket 0.
Fix this issue by setting mempolicy MPOL_PREFERRED for each hugepage
to one of requested nodes using following schema:
1) Allocate essential hugepages:
1.1) Allocate as many hugepages from numa N to
only fit requested memory for this numa.
1.2) repeat 1.1 for all numa nodes.
2) Try to map all remaining free hugepages in a round-robin
fashion.
3) Sort pages and choose the most suitable.
In this case all essential memory will be allocated and all remaining
pages will be fairly distributed between all requested nodes.
New config option RTE_EAL_NUMA_AWARE_HUGEPAGES introduced and
enabled by default for linuxapp except armv7 and dpaa2.
Enabling of this option adds libnuma as a dependency for EAL.
Fixes: 77988fc08d ("mem: fix allocating all free hugepages")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
TX coalescing waits for ETH_COALESCE_PKT_NUM packets to be coalesced
across bursts before transmitting them. For slow traffic, such as
100 PPS, this approach increases latency since packets are received
one at a time and tx coalescing has to wait for ETH_COALESCE_PKT
number of packets to arrive before transmitting.
To fix this:
- Update rx path to use status page instead and only receive packets
when either the ingress interrupt timer threshold (5 us) or
the ingress interrupt packet count threshold (32 packets) fires.
(i.e. whichever happens first).
- If number of packets coalesced is <= number of packets sent
by tx burst function, stop coalescing and transmit these packets
immediately.
Also added compile time option to favor throughput over latency by
default.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
DPAA2 devices now support cortex-a72. They no longer support a57.
Also fp and simd is no more required to be stated explicitly for
standard a72 core.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Stub callbacks for the generic flow API and a new FLOW debug define.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
When building DPDK with musl, there is need not to disable
backtrace to remove some references to execinfo.h which is
not supported by musl now.
This also applies to some other libc implementation which
doesn't support backtrace() and backtrace_symbols().
musl is an implementation of the userspace portion
of the standard library functionality described in
the ISO C and POSIX standards, plus common extensions.
Got more details about musl from http://www.musl-libc.org .
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Making AVX and AVX512 configurable is useful for performance and power
testing.
The similar kernel patch at https://patchwork.kernel.org/patch/9618883/.
AVX512 support like in rte_memcpy has been in DPDK since 16.04, but it's
still unproven in rich use cases in hardware. Therefore it's marked as
experimental for now, will enable it after enough field test and possible
optimization.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
armv8 implementations may have 64B or 128B cache line.
Setting to the maximum available cache line size in generic config to
address minimum DMA alignment across all arm64 implementations.
Increasing the cacheline size has no negative impact to cache invalidation
on systems with a smaller cache line.
The need for the minimum DMA alignment has impact on functional aspects
of the platform so default config should cater the functional aspects.
There is an impact on memory usage with this scheme, but that's not too
important for the single image arm64 distribution use case.
The arm64 linux kernel followed the similar approach for single
arm64 image use case.
http://lxr.free-electrons.com/source/arch/arm64/include/asm/cache.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
DPAA2 Hardware Mempool handlers allow enqueue/dequeue from NXP's
QBMAN hardware block.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS is set to 'dpaa2', if the pool
is enabled.
This memory pool currently supports packet mbuf type blocks only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The AVP devices are only supported on Intel 64-bit architectures so
adjusting the defconfig attributes accordingly.
Fixes: 908072e9d0 ("net/avp: support driver registration")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
The crypto scheduler PMD has no external dependencies to enable that by
default.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
