A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add Rx descriptor limit for number of segments per MTU.
PMD doesn't support Jumbo Rx scatter gather hence set 1 segment per
MTU. Some applications can adjust mbuf_size based on this value.
For others PMD detects the condition where Rx packet length cannot
be held by configured mbuf size and logs the message.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
In case of bnx2xvf pmd, tx packets can support vland id in 2 ways:
1. Setting the mbuf ol_flags=PKT_TX_VLAN_PKT and passing the
vlanid in mbuf->vlan_tci.
2. The tx packet itself has the vlan id included in the packet.
The first case is working as expected but the second case where
the vlan id is included in thetx packets itself was found not
working as expected. To handle that we need to properly set the
start_bd bitfield and the vlan_or_ethertype instead of setting it
to just the ethertype in case of VF.
Signed-off-by: Souvik Dey <sodey@rbbn.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add support the set_mc_addr_list device operation in the bnx2xvf PMD.
The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.
Without this v6 multicast packets were properly forwarded to the
Guest VF.
Signed-off-by: Souvik Dey <sodey@rbbn.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
For VLAN packet the tci is saved in rx_mb->vlan_tci, however the
STRIPPED offload flag is not set along with PKT_RX_VLAN flag.
Set the PKT_RX_VLAN_STRIPPED flag as well.
Fixes: 380a7aab1a ("mbuf: rename deprecated VLAN flags")
Fixes: b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
PMD handles fast path completions in the Rx handler and control path
completions in the interrupt handler. They both are processing
completions from the same fastpath completion queue. There is a
potential for race condition when these two paths are processing
the completions from the same queue and trying to updating Rx Producer.
Add a fastpath Rx lock between these two paths to close this race.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The fastpath task queue handler resets the fastpath scan flag
unconditionally, this patch changes that to reset the flag
only if it was set.
Fixes: 08a6e472c3 ("net/bnx2x: fix packet drop")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use kernel headers for __le* types to avoid potential conflicts
resulting in redefinition errors for some Linux build environments.
Add check for FreeBSD execution environments.
Without this fix, aarch64 builds can fail with error below:
In file included from ../drivers/net/bnx2x/bnx2x.h:22,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
../drivers/net/bnx2x/bnx2x_osal.h:27:17: error:
conflicting types for ‘uint64_t’
#define __le64 uint64_t
^~~~~~~~
In file included from /usr/include/stdint.h:37,
from /usr/lib/gcc/aarch64-linux-gnu/8/include/stdint.h:9,
from ../lib/librte_eal/common/include/arch/arm/rte_byteorder.h:16,
from ../drivers/net/bnx2x/bnx2x.h:17,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
/usr/include/aarch64-linux-gnu/bits/stdint-uintn.h:27:20: note:
previous declaration of ‘uint64_t’ was here
typedef __uint64_t uint64_t;
^~~~~~~~
There is also one minor change mixed in this commit:
Some use of __FreeBSD__ are replaced by RTE_EXEC_ENV_FREEBSD.
Fixes: 38dff79ba7 ("net/bnx2x: update HSI")
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Gavin Hu <gavin.hu@arm.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For SRIOV, fastpath status blocks are not allocated resulting in
segfault. Separate out fastpath DMA allocation/free from rest of
memory allocation/free. It is now done as part of NIC load/unload.
Comment indentation changes in bnx2x_alloc_hsi_mem() and
bnx2x_free_hsi_mem() APIs.
Fixes: f0219d98de ("net/bnx2x: fix interrupt flood")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
We do not need to schedule periodic poll for slowpath link events
for SRIOV. The link events are handled by the PF driver.
Fixes: 6041aa619f ("net/bnx2x: fix poll link status")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The logic to read vf_id used by ACQUIRE/TEARDOWN_Q/RELEASE TLVs,
multiplexed return value to convey vf_id value and status of read vf_id
API. This lets to segfault at dev_start() as resources are not properly
cleaned and re-allocated.
Fix read vf_id API to differentiate between vf_id value and return
status. Adjust the status checking accordingly.
Added bnx2x_vf_teardown_queue() API and moved relevant code from
bnx2x_vf_unload() to new API.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
mac_addrs points to a field in dev_private.
We can't let ethdev free it.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This driver had a bogus assert which could never happen.
This triggers "expression is always false warnings" with some
compilers which causes build failure.
Just remove it.
Fixes: 6041aa619f ("net/bnx2x: fix poll link status")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Driver does not provide limit on number Rx and Tx descriptors per queue,
this may result in application configuring 64k descriptors (default set
by rte_eth_dev_info_get()) and further result in issues in PMD and HW
flows due to unsupported number.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Don't call bnx2x_link_status_update() from bnx2x_link_update().
Actual use case of bnx2x_link_status_update() is to update the link
status in shared memory between driver and MFW, and not to get the
link status from HW.
So ideally, bnx2x_link_status_update() should be called when there
is an actual link event or change in link status.
Calling bnx2x_link_status_update() from bnx2x_link_update() may
corrupt the data of link status in shared memory and result
in inconsistent state of link.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
PMD sets up and clears the slow path interrupt status block in dev_start
and dev_stop flow and slow path interrupt status block DMA memory for
device is allocated in dev_configure flow.
This situation creates a state where, after dev_stop is called, and if
there is a slow path interrupt from device, PMD sees the old value of
status block consumer in dev_start flow, since DMA memory for status
block belongs to old configuration and dev_start will result in
new slow path interrupt status block configuration.
And since PMD fails to ack new slow path interrupt with correct status
block consumer value, device continues to trigger interrupt causing an
interrupt flood.
Fix is to create and destroy status block DMA memory in dev_start and
dev_stop flow instead of dev_configure and dev_close flow.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Patch "8bd31421c593 ("net/bnx2x: fix ramrod timeout")"
introduced a regression where sc->scan_fp flags is
set for unexpectedly long time. So the slow path completion
handler flow is run unnecessarily which walks over receive
descriptor ring of fast path and drops the data packets while looking
for slow path completion descriptor out of fast path ring.
This issue is seen under heavy traffic with link events happening
in background.
Fixes: 8bd31421c5 ("net/bnx2x: fix ramrod timeout")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the optic module vendor and part number verification from driver
by setting appropriate flags. Link handling module in conjunction with
FW performs optic module verification.
Without this fix the SFP is powered down and the link doesn't come up,
if module verification is enforced in nvram setting.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The periodic callout function and the interrupt handler both modify the
periodic flags. There is a possible race condition when an application
is going through dev_stop()/dev_start() and an interrupt handler is
invoked. We also need to ensure that periodic polling is not invoked in
interrupt context.
This patch handles such case by using separate variable to check for
interrupt context. Also, atomically load and store the periodic flag
value.
Fixes: 0f6ebeee24 ("net/bnx2x: fix call to link handling periodic function")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
In some cases, DPDK application may send packets
while PMD is going through load or unload flow.
This causes firmware to access invalid/unallocated
memory to process transmit buffer. Which results in
error on PCI bus and chip further blocks access to host,
causing a DMAE timeout.
Fix this issue by installing dummy empty transmit and receive
handlers at the beginning of unload path (rte_eth_dev_stop())
and install actual transmit and receive handlers after successful
load of the PMD port (rte_eth_dev_start()). This way, application
won't be able to send packets while device is going through
load/unload flow.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
There is a race condition while processing RAMROD
completion in fast path queue through interrupt handler
and polling method.
Interrupt handler invoked from actual interrupt event
and from RAMROD processing polling flow may create a
situation where one flow will read and clear a fastpath
interrupt without actually processing the RAMROD completion.
Thus, causing a RAMROD timeout even though HW sent an
completion event.
Fix this by introducing an atomic variable which will be
set only when interrupt handler needs to process RAMROD
completion.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
We allocate DMA memory but never free after using it.
Add function to free DMA memory.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previous ungraceful exit may leave behind un-acked stale
interrupts for slowpath and fastpath.
Interrupt status polling function is started before FLR is
initiated, so we don't have a real way to protect this polling
function invoking an interrupt handler caused due to stale
interrupt status from previous ungraceful exit.
So, check uninitialized status block variables in interrupt
handling path which may lead to segfault.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Whenever possible (if the library ships a pkg-config file) use meson's
dependency() function to look for it, as it will automatically add it
to the Requires.private list if needed, to allow for static builds to
succeed for reverse dependencies of DPDK. Otherwise the recursive
dependencies are not parsed, and users doing static builds have to
resolve them manually by themselves.
When using this API avoid additional checks that are superfluous and
take extra time, and avoid adding the linker flag manually which causes
it to be duplicated.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
