Fixes: 70febdcfd6 ("examples: check status of getting MAC address")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
lcore indexes can't be represented with uint8_t.
Seen on armv8 target:
examples/ntb/ntb_fwd.c: In function ‘cmd_quit_parsed’:
arm64-armv8a-linux-gcc/include/rte_lcore.h:296:8:
error: comparison is always true due to limited range of data type
[-Werror=type-limits]
i<RTE_MAX_LCORE; \
^
examples/ntb/ntb_fwd.c:164:2: note: in expansion of
macro ‘RTE_LCORE_FOREACH_SLAVE’
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 5194299d6e ("examples/ntb: support more functions")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Bare metal support has been gone for quite some time but we still had
some checks on system includes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Support to transmit files between two systems.
Support iofwd between one ethdev and NTB device.
Support rxonly and txonly for NTB device.
Support to set forwarding mode as file-trans, txonly,
rxonly or iofwd.
Support to show/clear port stats and throughput.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This function is listed under EXPERIMENTAL in the
rte_vhost_version.map, so it needs to be marked
with __rte_experimental in the header file as well.
Found by check-experimental-syms.sh when trying to compile
DPDK with -finstrument-functions. This script didn't
catch this in the normal case, since the function is
declared __rte_always_inline.
This also requires updating the vhost_scsi example to allow
use of this newly marked experimental API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples/ipv4_multicast
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/vhost according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/qos_sched according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_filtering according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_classify according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/ipsec-secgw according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
rte_eth_dev_info_get() always fills in device information memory
with zeros on entry.
Fixes: b671987985 ("ethdev: avoid getting uninitialized info for bad port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update Scapy version requirement from 2.4.3rc1 to 2.4.3, which has been
used because 2.4.2 had a bug which made this version unable to install.
Accept future versions of Scapy too.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
One issue caught by Coverity 343408
*deref_parm: Directly dereferencing parameter val->val.
In writeback_tdes_hex_str(), tmp_val is initialised to null.
tmp_val.val is updated only if keys are found.
If keys are not found,it doesn't fails but continues
to invoke writeback_hex_str(),where val->val is accessed
without null check.
The fix is to return the error,
if keys are not found in writeback_tdes_hex_str().
Coverity issue: 343408
Fixes: 527cbf3d5e ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When sending an encrypted packet which size after encapsulation exceeds
MTU, ipsec-secgw application tries to fragment it. If --reassemble
option has not been set it results with a segmantation fault, because
fragmentation buckets have not been initialized.
Fix crashing by adding extra check if --ressemble option has not been
set and packet exceeds MTU after encapsulation - drop it.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPv6 tunnels are already supported in case of inline and
lookaside none cases. In case of protocol offload, the details
for IPv6 header need to be added in session configuration
for security session create.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For unknown/unsupported packets, the packet would get checked for inline
offloads after the packet is freed.
Fixes: 0ccfd14bc1 ("examples/ipsec-secgw: support inline protocol")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Check the return value of the rte_eth_dev_rss_hash_conf_get function.
Coverity issue: 344970
Fixes: 3a690d5a65 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In APP_MODE_SRTCM_COLOR_AWARE mode, sample app compilation fails
due to wrong meter color type conversion.
error log-
/qos_meter/main.c:error: conversion to incomplete type
(enum rte_meter_color) input_color);
Fixes: c1656328db ("meter: replace color definitions")
Cc: stable@dpdk.org
Reported-by: Yuan Peng <yuan.peng@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The sched library checks the subport tc ov weight value regardless
of whether RTE_SCHED_SUBPORT_TC_OV flag is enabled or not.
This fix allows application to always set valid tc ov weight value.
error log
SCHED: pipe_profile_check: Incorrect value for tc ov weight
SCHED: rte_sched_port_check_params: Pipe profile check failed(-22)
Command "tmgr" failed.
Fixes: 25961ff3bc ("examples/ip_pipeline: add traffic manager object")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Example BPF programs t2.c, t3.c in folder examples/bpf are
failing to compile with latest dpdk.org master.
The reason is changes in some core DPDK header files, that causes
now inclusion of x86 specific headers.
To overcome the issue, minimize inclusion of DPDK header files
into BPF source code.
Bugzilla ID: 321
Fixes: 9dfc06c26a ("test/bpf: add samples")
Cc: stable@dpdk.org
Reported-by: Michel Machado <michel@digirati.com.br>
Suggested-by: Michel Machado <michel@digirati.com.br>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds return value checking for fseek function to fix
error handling issue found by coverity scan.
Coverity issue: 344996
Fixes: c5eebf85ba ("examples/ntb: add example for NTB")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since all PMDs doesn't implement per queue offload capabilities but
supports RX timestamping and also since rx_offload_capa includes all
rx_queue_offload_capa's. Hence moving the logic to enable HW timestamp
via DEV_RX_OFFLOAD_TIMESTAMP flag before device configuration so that
this application can work with all PMDs.
Fixes: cd1dadeb9b ("examples/rxtx_callbacks: support HW timestamp")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add RED configuration to more traffic classes in app configuration
files.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Observed an issue with the length and domain number of the
delay request message sent out by the client. Due to which delay
response from master was not received.
Fixes: ab129e9065 ("examples/ptpclient: add minimal PTP client")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Application uses different pool to allocate direct and indirect
mbufs which are further spliced together to consturct a fragmented
packet and same is transmitted over the port which is configured
with DEV_TX_OFFLOAD_MBUF_FAST_FREE enabled i.e. all segments
must belong to the same pool. But constructed packet violates
the conditions.
So fixing DEV_TX_OFFLOAD_MBUF_FAST_FREE flag during device
configuration.
Fixes: fdb9eff67f ("examples/ip_fragmentation: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The eth_dev_info was used with content that was obsolete. Added update
of struct content prior to use.
Fixes: 6b7780bfeb ("examples/ip_frag: fix use of ethdev internal device array")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update ip pipeline sample app for configuration flexiblity of
pipe traffic classes and queues.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Remove workaround in tun_aesgcm_defs.sh and trs_aesgcm_defs.sh
to get around the bug where the first inbound packet is dropped
for inline crypto.
Fixes: 9297844520 ("examples/ipsec-secgw: add scripts for functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline crypto installs a flow rule in the NIC. This flow
rule must be installed before the first inbound packet is
received.
The create_session() function installs the flow rule,
create_session() has been refactored into create_inline_session()
and create_lookaside_session(). The create_inline_session() function
uses the socket_ctx data and is now called at initialisation in
sa_add_rules().
The max_session_size() function has been added to calculate memory
requirements.
The cryprodev_init() function has been refactored to drop calls to
rte_mempool_create() and to drop calculation of memory requirements.
The main() function has been refactored to call max_session_size() and
to call session_pool_init() and session_priv_pool_init() earlier.
The ports are started now before adding a flow rule in main().
The sa_init(), sp4_init(), sp6_init() and rt_init() functions are
now called after the ports have been started.
The rte_ipsec_session_prepare() function is called in fill_ipsec_session()
for inline which is called from the ipsec_sa_init() function.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add parameter --mtu parse key and enumeration value.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch changes the key pointer data types in cipher, auth,
and aead xforms from "uint8_t *" to "const uint8_t *" for a
more intuitive and safe sessionn creation.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Liron Himi <lironh@marvell.com>
The timer subsystem should be initialized in the l3fwd-thread app before
the L-thread subsystem can be used.
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
The state of virtio device has been defined in both header file and
source file, keep the definition in header file for public use.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Right now app blindly set IPv4 ether type for all non IPv6 packets.
Instead we can save and later restore original type value.
Fixes: 74de12b7b6 ("examples/ip_fragmentation: overhaul")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With latest changes l3fwd_simple_forward() blindly set
(PKT_TX_IPV4 | PKT_TX_IP_CKSUM) ol_flags for all IPv4 packets.
Though for un-fragmented packets we also do have to set l3_len
to make HW IP cksum offload to work properly.
That causes HW/PMD to drop or generate invalid packets.
Though for un-fragmented packets we don't need to regenerate
IPv4 cksum, as L3 header is not modified.
Fix by setting ol_flags only when required.
Fixes: 16863bbb4a ("examples/ip_fragmentation: enable IP checksum offload")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Modify ip_fragmentation example app to use rte_eth_info_get instead
of global rte_eth_devices structure.
Apps should not be using internal DPDK data structures directly.
Fixes: 9758b956dc ("examples/ip_fragmentation: fix Tx queues init")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modify ipsec-secgw example app to use rte_eth_dev_info_get instead of
rte_eth_dev.
Apps should not be using internal DPDK data structures directly.
Fixes: a4677f7836 ("examples/ipsec-secgw: add target queues in flow actions")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Modify l3fwd and related example apps to use locally defined port_conf
instead of global rte_eth_devices which is not a part of public API.
Apps should not be using internal DPDK data structures directly.
Fixes: 1ef9600b2d ("examples/l3fwd: convert to ethdev offloads API")
Fixes: ba8c103d24 ("examples/l3fwd-acl: convert to new ethdev offloads API")
Fixes: 40df1d7a69 ("examples/l3fwd-power: convert to new ethdev offloads API")
Fixes: 43fc038262 ("examples/l3fwd-vf: convert to new ethdev offloads API")
Fixes: 373149c631 ("examples/performance-thread: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
While the core frequency scale-up and scale down all works fine with the
fifo-per-core functionality, there was a gap for policy handling. When
creating or destroying a policy, the core associated with the FIFO
needs to be automatically added to the core list, so the policy is
associated with the correct core.
Fixes: 221e7026d5 ("examples/power: add FIFO per core for JSON interface")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Current implementation only outputs 3 numbers for busyness, 0, 50 and 100.
Fix this so that the 50% is replaced by a curve, more meaningful.
This can be replaced in each use case by a suitable calculation for
that use case.
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
replace strcpy with strlcpy to prevent buffer overrun
With fix, attempting to use a VERY lonng vm name results in a nicely
truncated 32 character name rather than a segfault:
Setting VM Name to [sdfdsfsfsdffdsdsasdsadasdakjshd]
Using strlcpy rather than rte_strlcpy, as the rte_ version is only a
fallback.
As well as the fix in main.c, this patch also changes an occurrence of
rte_strlcpy in channel_manager.c and channel_monitor.c to strlcpy.
Fixes: 59287933a0 ("examples/vm_power: add options to guest app")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Samples apps that depend on the power library should not build if
the power library is not present. So now the following apps will
check to see if it's built, else skip building.
* l3fwd-pwer
* vm_power_manager
* guest_cli
Fixes: e013078857 ("examples/power: support meson/ninja build")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 issues caught by Coverity 343465
* Possible divide by zero on 3 lines
* Convert to float then back to int, losing precision on 3 lines
This patch modifies the code so that it only assigns calculated
values if the divisor is > 0, otherwise sets metrics to zero.
Also removes the un-needed round() function.
Coverity issue: 343465
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
any core on the system. By using appropriate permissions, FIFO interfaces
can be configured to only affect the particular cores.
Because each FIFO is per core, the following fields have been removed
from the command JSON format: core_list, resource_id, name.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Lukasz Gosiewski <lukaszx.gosiewski@intel.com>
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The current implementation using the '__sync' built-ins to synchronize
statistics within worker threads. The '__sync' built-ins functions are
full barriers which will affect the performance, so add a per worker
packets statistics to remove the synchronisation between worker threads.
Since the maximum core number can get to 256, so disable the per core
stats print in default and add the --insight-worker option to enable it.
For example:
sudo examples/packet_ordering/arm64-armv8a-linuxapp-gcc/packet_ordering \
-l 112-115 --socket-mem=1024,1024 -n 4 -- -p 0x03 --insight-worker
RX thread stats:
- Pkts rxd: 226539223
- Pkts enqd to workers ring: 226539223
Worker thread stats on core [113]:
- Pkts deqd from workers ring: 77557888
- Pkts enqd to tx ring: 77557888
- Pkts enq to tx failed: 0
Worker thread stats on core [114]:
- Pkts deqd from workers ring: 148981335
- Pkts enqd to tx ring: 148981335
- Pkts enq to tx failed: 0
Worker thread stats:
- Pkts deqd from workers ring: 226539223
- Pkts enqd to tx ring: 226539223
- Pkts enq to tx failed: 0
TX stats:
- Pkts deqd from tx ring: 226539223
- Ro Pkts transmitted: 226539168
- Ro Pkts tx failed: 0
- Pkts transmitted w/o reorder: 0
- Pkts tx failed w/o reorder: 0
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch updates the ipsec-secgw application to support
header reconstruction. In addition a series of tests have
been added to prove the implementation's correctness.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add simple test-case with all traffic in BYPASS mode.
Useful for some basic test of your network environment.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add optional ability to fragment packet bigger then mtu,
and reassemble fragmented packet.
To minimize possible performance effect, reassembly is
implemented as RX callback.
To support these features ipsec-secgw relies on librte_ipsec ability
to handle multi-segment packets.
Also when reassemble/fragmentation support is enabled, attached
crypto devices have to support 'In Place SGL' offload capability.
To enable/disable this functionality, two new optional command-line
options are introduced:
--reassemble <val> - number of entries in reassemble table
--mtu <val> - MTU value for all attached ports
As separate '--mtu' option is introduced, '-j <val>' option is now used
to specify mbuf data buffer size only.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
for packets smaller then 64B some NICs reports pkt_len=64B.
As ipsec-secgw (and librte_ipsec) relies on pkt_len value to determine
payload length, that causes problems for small packets.
To fix the issue, check that pkt_len matches values in IPv4/IPv6 header
and re-adjust pkt_len if necessary.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Application ipsec-secgw is not working for IPv4 transport mode and for
IPv6 both transport and tunnel mode.
IPv6 tunnel mode is not working due to wrongly assigned fields of
security association patterns, as it was IPv4, during creation of
inline crypto session.
IPv6 and IPv4 transport mode is iterating through security capabilities
until it reaches tunnel, which causes session to be created as tunnel,
instead of transport. Another issue, is that config file does not
provide source and destination ip addresses for transport mode, which
are required by NIC to perform inline crypto. It uses default addresses
stored in security association (all zeroes), which causes dropped
packages.
To fix that, reorganization of code in create_session() is needed,
to behave appropriately to given protocol (IPv6/IPv4). Change in
iteration through security capabilities is also required, to check
for expected mode (not only tunnel).
For lack of addresses issue, some resolving mechanism is needed.
Approach is to store addresses in security association, as it is
for tunnel mode. Difference is that they are obtained from sp rules,
instead of config file. To do that, sp[4/6]_spi_present() function
is used to find addresses based on spi value, and then stored in
corresponding sa rule. This approach assumes, that every sp rule
for inline crypto have valid addresses, as well as range of addresses
is not supported.
New flags for ipsec_sa structure are required to distinguish between
IPv4 and IPv6 transport modes. Because of that, there is need to
change all checks done on these flags, so they work as expected.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Cc: stable@dpdk.org
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new unittest-like mechanism which uses scapy to craft custom
packets and a set of assertions to check how ipsec-secgw example
application is processing them. Python3 with scapy module is
required by pkttest.sh to run test scripts.
A new mechanism is used to test IPv6 transport mode traffic with
header extensions (trs_ipv6opts.py).
Fix incomplete test log problem by disabling buffering of ipsec-secgw
standard output with stdbuf application.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Using transport with IPv6 and header extensions requires calculating
total header length including extensions up to ESP header which is
achieved with iteratively parsing extensions when preparing traffic
for processing. Calculated l3_len is later used to determine SPI
field offset for an inbound traffic and to reconstruct L3 header by
librte_ipsec.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Make versions before 4.2 did not have support for the .SHELLSTATUS
variable, so use another method to detect shell success.
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The vhost_crypto example app did not check for a libdpdk pkg-config file
and attempt to build using that. Add support for that method of compile to
align the app with the other examples.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The vdpa example app did not check for a libdpdk pkg-config file and
attempt to build using that. Add support for that method of compile to
align the app with the other examples.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For testing of DPDK, we want to override the prefix given by the
pkg-config file, so that we can get correct paths for DPDK installed
in an unusual location.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The RX and TX Prefetch, Host, and Write-back threshold values are
defined but not used anywhere. They are leftovers from a previous
patch.
Fixes: 81f7ecd9 ("examples: use factorized default Rx/Tx configuration")
Cc: stable@dpdk.org
Signed-off-by: Bao-Long Tran <longtb5@viettel.com.vn>
Add new telemetry mode support for l3fwd-power.
This is a standalone mode, in this mode l3fwd-power
does simple l3fwding along with calculating
empty polls, full polls, and busy percentage for
each forwarding core. The aggregation of these
values of all cores is reported as application
level telemetry to metric library for every 500ms from the
master core.
The busy percentage is calculated by recording the poll_count
and when the count reaches a defined value the total
cycles it took is measured and compared with minimum and maximum
reference cycles and busy rate is set according to either 0% or
50% or 100%.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch tries to fix the coverity issue of unchecked
return value. Since the function that causes the problem
is unused, it is removed completely.
Coverity issue: 336816
Fixes: f5188211c7 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This check on Linux environment has been added at a time when we already
had switched to using the boolean RTE_EXEC_ENV_LINUXAPP.
It was then missed when converting to RTE_EXEC_ENV_LINUX.
Fixes: edbed86d1c ("examples/vdpa: introduce a new sample for vDPA")
Fixes: 742bde12f3 ("build/linux: rename macro from LINUXAPP to LINUX")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Use rxtx callback to demonstrate a way to use rte_eth_read_clock to
convert the hardware timestamps to an amount of cycles.
This allows to get the amount of time the packet spent since its entry
in the device. While the regular latency only shows the latency from
when it entered the software stack.
Signed-off-by: Tom Barbette <barbette@kth.se>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught on FreeBSD 12:
/usr/include/netinet/ip.h:71:17: error: field 'ip_src' has incomplete type
struct in_addr ip_src,ip_dst; /* source and dest address */
^~~~~~
On FreeBSD, netinet/ip.h is not auto sufficient like on Linux.
But actually, this header is not used in the example, just remove it.
Fixes: 764bf26873 ("add FreeBSD support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The application tries to configure queue ids larger
than the maximum allowed by MAX_TX_QUEUE_PER_PORT. This
causes the startup error:
"
...
Initializing port 0 on lcore 0... Address:7C:FE:90:12:23:0D
txq=0,0 txq=1,1 txq=2,2 txq=3,3 txq=4,4 txq=5,5 txq=6,6 txq=7,7 txq=8,8
txq=9,9 txq=10,10 txq=11,11 txq=12,12 txq=13,13 txq=14,14 txq=15,15
txq=16,16 Invalid TX queue_id=16
EAL: Error - exiting with code: 1
Cause: rte_eth_tx_queue_setup: err=-22, port=0
"
The error reproduces when lcores aren't set, and when the
machine has more than 16 cores.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
This enables building the example multiprocess applications in
the subdirectory multi_process.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This would allow correctly naming an application residing
in a subdirectory. For example, if the example is set to 'path/to/app',
then the name would be 'app'.
This doesn't affect the naming of an example that isn't in a subdirectory.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since we now always use _FILE_OFFSET_BITS=64 flag when building
DPDK, we can remove the Makefile and C-file #defines setting it
individually for parts of the build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Referring to lcore_config directly is no longer recommended.
Also remove unnecessary assignment of slave_core_id.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Prefer the existing apis rather than direct access the configuration
structure.
Fixes: de3cfa2c98 ("sched: initial import")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Prefer the existing apis rather than direct access the configuration
structure.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Current design requires kernel drivers and they need to be probed by
Linux up to some level so that they can be usable by DPDK for ethtool
support, this requires maintaining the Linux drivers in DPDK.
Also ethtool support is limited and hard, if not impossible, to expand
to other PMDs.
Since KNI ethtool support is not used commonly, if not used at all,
removing the support for the sake of simplicity and maintenance.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
snprintf guarantees to always correctly place a null terminator
in the buffer string. So manually placing a null terminator
in a buffer right after a call to snprintf is redundant code.
Additionally, there is no need to use 'sizeof(buffer) - 1' in snprintf as this
means we are not using the last character in the buffer. 'sizeof(buffer)' is
enough.
Cc: stable@dpdk.org
Signed-off-by: Michael Santana <msantana@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The "make clean" command had a number of issues:
- the "--ignore-fail-on-non-empty" flag is not present on BSD
- the call to remove the build folder would fail if there was no build
folder present.
These are fixed by only removing the build folder if it exists, and by
using -p flag to rmdir in place of --ignore-fail-on-non-empty
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/meson.build file scanned the filesystem to find all examples
to build (for examples=all option) and install. However, using run_command
and scanning the filesystem prevented ninja from properly detecting the
addition or removal of any examples - one had to recreate the build
directory from scratch to guarantee correct detection of all examples. This
patch replaces this generated list with a static list of examples, thereby
allowing proper tracking by ninja/meson, but at the cost of having to
update this file when a new example is added or removed.
This also fixes an issue with Windows builds, since "sh" is not available
there.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
While the examples were being installed into the appropriate install path
when processing the examples/meson.build file, that file was only processed
if the "examples" meson parameter was non-empty. Since we now do more than
just build the examples, we need to unconditionally process the file.
Fixes: 2daf565f91 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Fix invalid indentation - extra whitespace before error directive which
is causing syntax error when no pkgconfig file for the DPDK is found and
RTE_SDK is not specified.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
coverity complains about a null-termination after a read,
so we terminate once we exit the do-while read loop.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
The freqs array in freq_info struct has RTE_MAX_LCORE_FREQS elements,
yet the code can attempt to look at the index at RTE_MAX_LCORE,
which may be greater than RTE_MAX_LCORE_FREQS. Fix to limit index to
RTE_MAX_LCORE_FREQS.
Coverity issue: 337660
Fixes: d26c18c932 ("examples/vm_power: cpu frequency in host")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
For client_server_mp, the total number of buffers for the mbuf mempool
should be correctly calculated. Otherwise, having more clients will stop
traffic.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Traditionally, only a single buffer pool per port
(or, per-port-per-socket) is created in l3fwd application.
If separate pools are created per-port, it might lead to gain in
performance as packet alloc/dealloc requests would be isolated
across ports (and their corresponding lcores).
This patch adds an argument '--per-port-pool' to the l3fwd application.
By default, old mode of single pool per port (split on sockets) is
active.
L3fwd user guide is also updated by this patch.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
When we install dpdk onto a system, we want to put the examples into
the /usr/share/dpdk (or /usr/local/share) directory for reference.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
On freebsd we need to include sys/socket.h to get the definition of
AF_INET in order to compile.
Fixes: d5ceea4ab1 ("examples/l3fwd: format IP addresses for printing")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently, two separate mempools are being used for creating crypto
sessions and its private data.
crypto sessions are created and initialized separately, so a separate
mempool is passed to each API, but in case of security sessions, where
only one API create and initialize the private data as well.
So if session mempool is passed to create a security session, the
mempool element size is not sufficient enough to hold the private
data as well.
As a perfect solution, the security session create API should take 2
mempools for header and private data and initiatlize accordingly,
but that would mean an API breakage, which will be done in the next
release cycle. So introducing this patch as a workaround to resolve this
issue.
Fixes: 261bbff75e ("examples: use separate crypto session mempools")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
acl_classify() returns zero value when no matching rule was found.
Currently ipsec-secgw treats it as a valid SPI value, though it has
to discard such packets.
Error could be easily observed by sending outbound unmatched packets,
user will see something like that in the log:
IPSEC: No cryptodev: core 7, cipher_algo 0, auth_algo 0, aead_algo 0
To fix it we need to treat packets with zero result from acl_classify()
as invalid ones. Also we can change DISCARD and BYPASS values to
simplify checks and save some extra space for valid SPI values.
To summarize the approach:
1. have special SPI values for DISCARD and BYPASS.
2. store in SPD full SPI value.
3. after acl_classify(), first check SPI value for DISCARD and BYPASS,
then convert it in SA index.
4. add check at initilisation time that for each SPD rule there is a
corresponding SA entry (with the same SPI).
Also marked few global variables as *static*.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Fixes: 2a5106af13 ("examples/ipsec-secgw: fix corner case for SPI value")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Coverity points out that there is a check in the main thread loop for the
ctrlr->bdev being NULL, but by that stage the pointer has already been
dereferenced. Therefore, for safety, before we enter the loop do an
initial check on the parameter structure.
Coverity issue: 158657
Fixes: db75c7af19 ("examples/vhost_scsi: introduce a new sample app")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The header check for the example app was looking for virtio_scsi.h without
the "linux/" prefix, which meant it was never getting found when it should
have been.
Fixes: 8d47a753b7 ("examples/vhost_scsi: disable build if missing dependency")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Running the devtools/test-build.sh script on IBM Power systems fails
because the IXGBE_PMD is explicity disabled for Power as an untested
driver, but the examples/vm_power_manager application has a hard
dependency on a function call in the IXGBE_PMD.
Modify the example application so that all dependencies on PMD code
are conditionally compiled.
Bugzilla ID: 237
Fixes: c9a4779135 ("examples/vm_power_mgr: set MAC address of VF")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Fix the data type of last_branches, last_branch_misses
from uint32_t to uint64_t, and for hits_diff, miss_diff
from int to int64_t respectively to fix possible
overflow or truncation.
Coverity issue: 337677
Fixes: 4b1a631b8a ("examples/vm_power: add oob monitoring functions")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
After the read() the jason_data null termination is missing
for the case "indent < 0", for "indent > 0" and "indent == 0"
cases null termination is already handled.
So add the missing case "indent < 0" to the existing "indent == 0"
case to fix null termination.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the break so that the loop can execute
properly.
Coverity issue: 337682
Fixes: ace158c4a8 ("examples/vm_power: add check for port count")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
A previous change removed the limit of 64 cores by
moving away from 64-bit masks to char arrays. However
this left a buffer overrun issue, where the max channels
was defined as 64, and max cores was defined as 256. These
should all be consistently set to RTE_MAX_LCORE.
The #defines being removed are CHANNEL_CMDS_MAX_CPUS,
CHANNEL_CMDS_MAX_CHANNELS, POWER_MGR_MAX_CPUS, and
CHANNEL_CMDS_MAX_VM_CHANNELS, and are being replaced
with RTE_MAX_LCORE for consistency and simplicity.
Coverity issue: 337672, 337673, 337678
Fixes: fd73630e95 ("examples/power: change 64-bit masks to arrays")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Removed dependency to mac_list from policies:
* BRANCH_RATIO,
* WORKLOAD,
* TIME
in function update_policy.
Fixes: 1b89799147 ("power: update error handling")
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Yufeng Mo <yufengx.mo@intel.com>
The IP addresses should be formatted using standard routines
rather than outputing in raw hex.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The l3fwd example should use the IPv4 addresses defined in RFC5735 and
the IPv6 addresses defined in RFC5180 for the L3 forwarding example
Longest Prefix Match table.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As a result of the cmac test running the test where
PT len is 65536 it should give a result back to the
user USER1: Error -1: Prepare op USER1: PT len 65536
as this MSG len is not supported. Issue was
that the application was not freeing the op properly after
a while causing the app to fail.
CRYPTODEV: rte_cryptodev_sym_session_create() line 1340:
couldn't get object from session mempool
USER1: Error -12: test block
USER1: Error -12: Failed test CMAC/req/CMAC.req
Fixes: cd255ccf57 ("examples/fips_validation: support AES parsing")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Application was failing as the HMAC and
Plain SHA fips request files are similar in a
way that they both have SHA- in the top section to
determine the hash algo and hash sizes. And HMAC having the
algo in the second line but the Plain SHA in the third
meant that when the HMAC files was used once it parsed the third
line Plain SHA was set as the algo and not HMAC.
USER1: Failed to get capability for cdev 0
USER1: Error -22: test block
[L=20 SHAAlg=SHA_2]
USER1: Error -22: Failed test /root/FIPS/HMAC/req/HMAC.req
Fixes: f4797bae00 ("examples/fips_validation: support plain SHA")
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
The definition of CPU_AND differs from Linux to BSD, so we need to use
RTE_CPU_AND instead.
Fixes: f6baccbc2b ("examples/l2fwd-cat: add sample application for PQoS CAT and CDP")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The power library is not built on non-Linux systems, so skip the
distributor sample if it's not found, as it's a mandatory dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added meson workarounds to build helloworld on Windows.
Windows currently only supports kvargs and eal libraries.
This change restricts the build flow to supported libraries
only.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
The distributor application is bottlenecked by the distributor core,
so if we can give more frequency to this core, then the overall
performance of the application may increase.
This patch uses the rte_power_get_capabilities() API to query the
cores provided in the core mask, and if any high frequency cores are
found (e.g. Turbo Boost is enabled), we will pin the distributor
workload to that core.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
