This function was previously private to the EAL layer.
Other subsystems requires it, such as the PCI bus.
In order not to force other components to include stdbool, which is
incompatible with several NIC drivers, the return type has
been changed from bool to int.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The macro RTE_SET_USED is defined in rte_common.h
This header is included through eal_private.h, which includes in turn
rte_pci.h
Once the PCI subsystem is out of the EAL, this will break the
compilation (seen on FreeBSD).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This header is included through rte_pci.h, which will be removed once
the PCI bus is moved out of the EAL.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Fixes: cbc12b0a96 ("mk: do not generate LDLIBS from directory dependencies")
Fixes: b677d4c6d2 ("net/dpaa2: add API for event Rx adapter")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Various symbols are being used by DPAA Crypto driver which were not exposed
from DPAA bus during initial version. This breaks the shared build.
This patch also adds the LDLIBS line required after (cbc12b0a9) patch.
Fixes: c3e85bdcc6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Build fails when rte_security is disabled; make rte_security mandatory
Fixes: 0a23d4b6f4 ("crypto/dpaa2_sec: support protocol offload IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Build fails when rte_security is disabled; make rte_security mandatory
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Tested-by: David Marchand <david.marchand@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Result of slaves link properties validation is not used when new slave
is added.
This patch uses the value of link_properties_valid() to determinate if
slave can be used in the bonding. If function fails, error is returned
preventing to add slave with invalid link properties.
Coverity issue: 158661
Fixes: deba8a2f8b ("net/bonding: fix link properties management")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
LIST macro are not safe when inside a LIST_FOREACH() a LIST_REMOVE() is
called to remove an entry, this behavior is undefined causing some entries
to disappear from the list.
Fixes: 6e78005a9b ("net/mlx5: add reference counter on DPDK Tx queues")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When copying VLAN tags from the RX descriptor to the vlan_tci field
in the mbuf header, igb_rxtx.c:eth_igb_recv_pkts() and
eth_igb_recv_scattered_pkts() both assume that the VLAN tag is always
little endian. While i350, i354 and /i350vf VLAN non-loopback
packets are stored little endian, VLAN tags in loopback packets (LB)
for those devices are big endian.
For i350, i354 and i350vf VLAN loopback packets, swap the tag when
copying from the RX descriptor to the mbuf header. This will ensure
that the mbuf vlan_tci is always little endian.
Signed-off-by: Roger Melton <rmelton@cisco.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Configuring UAR as IO-mapped makes maximum throughput decline by
noticeable amount. If UAR is configured as write-combining register,
a write memory barrier is needed on ringing a doorbell.
rte_wmb() is mostly effective when the size of a burst is comparatively
small. Revert the register back to write-combining and enforce a write
memory barrier instead, except for vectorized Tx burst routines.
Application can change it by setting MLX5_SHUT_UP_BF under its own
necessity.
Fixes: 9f9bebae55 ("net/mlx5: don't map doorbell register to write combining")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Drop queue should also adjust their priority according the most specific
layer in the pattern they are matching to avoid dropping all the
traffic.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If a PCI device detach removal fails, returns the actual removal
operator error value.
Use this value within pci->unplug, as it may help applications solve an
issue with the feature or more accurately warn their users.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This flag is deprecated and should not be used to check for the device
ability to be detached.
The rte_dev library call will fail with the relevant error code if
detaching this port is not possible.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fixes: 75cd6fb1d9 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
return value stored in "rc" but it has been overwritten before use.
Coverity issue: 147216
Fixes: 7a5b087444 ("net/bnxt: support to add a VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are left shifting more bits than we should be doing.
This patch fixes that.
Coverity issue: 127546
Fixes: 778b759ba1 ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The case to handle redirect a flow to a VF is not handled.
This patch fixes it.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch removes some redundant code from bnxt_mq_rx_configure().
Fixes: 75cd6fb1d9 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch simplifies logic for RSS queue creation.
1) Do not hardcode number of VNIC pools in case of RSS
2) Log a message if Number of queues is > RTE_ETHDEV_QUEUE_STAT_CNTRS
3) Move the check for allocation of l2_filter inside the for loop.
Fixes: 6133f20797 ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not setting the rx_offload capabilities. Fixing that.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not indicating VLAN insert capability of HW. Fixing it.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
when VSI is enabled with smaller number of queues, for example 1 or 6,
it will cause error.
64 is the max number of queues that can be used for RSS, but VSI might
be created with only few queues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When VF reset will be supported by drivers, the API will most likely
have to return -EAGAIN to avoid blocking when the VF cannot be reset
because the PF is down.
Document it immediately even if it's not yet supported, so that users
and developers can already take into account about this use case, and
thus avoid an API-incompatible change later on.
This is based on real-world production usage and customer escalations,
using earlier patches from Intel [1].
[1]
http://dpdk.org/ml/archives/dev/2017-October/079692.html
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This new function returns 0 on success and various error codes on
different failures. Attempt to document them.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Document how DPDK app should handle the event of switch quit-restart
to resume its network without an app-level restart.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
For VF events indicating a change in the state of the switch manager,
the driver will restore the basic port configurations and then pass this
event to application so that the application can restore any additional
configurations if required.
In this way, once the switch manager restarts, the DPDK application can
resume its network.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For PF events indicating a change in the state of the switch manager,
the driver will restore the basic port configurations and then pass this
event to application so that the application can restore any additional
configurations if required.
In this way, once the switch manager restarts, the DPDK application can
resume its network.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As fm10k host interface is not directly connected to PHY, marking the
link status as UP doesn't mean a lot to the application.
So, this patch basically redefines the link status as the state of
switch manager: when switch manager is running, it's LINK_UP;
when switch manager goes down by calling the fmTerminate function,
status turns to LINK_DOWN.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Flows are added by priv_flow_create() in the associated list, adding them a
second time corrupts the list causing an infinite loop when parsing it.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When VLAN is enabled in the Rx side, only packets matching this VLAN are
expected, this also includes the broadcast and all multicast packets.
Fixes: 272733b5eb ("net/mlx5: use flow to enable unicast traffic")
Fixes: 6a6b6828fe ("net/mlx5: use flow to enable all multi mode")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Marking a packet which will not be received by the NIC is useless, even
if this action remains possible, it blocks the creation of the flow
counter which embed a mark action to a drop queue to be created.
Fixes: 31ba9997f1 ("net/mlx5: fully convert a flow to verbs in validate")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Flow director drop action as not been brought back with the new
implementation on top of rte flow.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Fix the drop queue rule creation when the port is stopped.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
