This file is going to disappear, remove the doxygen parts that reference
various drivers and remove it from the doxygen index.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch explains current virtio PMD Rx/Tx callbacks, to help understand
what's the difference, and how to enable the right ones.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch adds support for extended statistics for BNX2X PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds support for extended statistics for QEDE PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Update the 'High Performance of Small Packets on 40G NIC' section of the
Getting Started Guide (GSG) as the firmware version referenced for a NIC
using the i40e driver was version 4.2.5 which is no longer validated.
Instruct users to consult release notes for current validated firmware
versions.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
mmap the iomem range of the PCI device fails for kernels that
enabled CONFIG_IO_STRICT_DEVMEM option:
EAL: pci_map_resource():
cannot mmap(39, 0x7f1c51800000, 0x100000, 0x0):
Invalid argument (0xffffffffffffffff)
CONFIG_IO_STRICT_DEVMEM is introduced in Linux v4.5 and not enabled
by default:
Linux commit: 90a545e restrict /dev/mem to idle io memory ranges
As a workaround igb_uio can stop reserving PCI memory resources, from
kernel point of view iomem region looks like idle and mmap works
again. This matches uio_pci_generic usage.
With this update device iomem range is not protected against any
other kernel drivers or userspace access. But this shouldn't
be a problem for dpdk usage module since purpose of the igb_uio
module is to provide userspace access.
Fixes: af75078fec ("first public release")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
KASUMI PMD only supports bit-level cipher operations
when destination buffer is different from the source
(out of place operations). This commit adds a check
in the code to prevent the user from trying to perform
in-place bit-level ciphering.
Fixes: 2773c86d06 ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Sphynx reports this error:
doc/guides/prog_guide/dev_kit_build_system.rst:337: WARNING:
Pygments lexer name u'C' is not known
Fixes: 737ddf3fb ("doc: add prog guide section documenting pmdinfo script")
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The recipe rte.hostapp.mk does not build in hostapp/ anymore.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Information on pmdinfogen may be useful to 3rd party driver developers.
Include documentation on what it does
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Mainly on updating vhost-user part: we now support client mode.
Also refine some words, and add a bit more explanation.
And made an emphatic statement that you are suggested to use vhost-user
instead of vhost-cuse, because we have enhanced vhost-user a lot since
v2.2 (Actually, I doubt there are any people still using vhost-cuse)
[John McNamara: rewords, better formats]
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool cache is only available to EAL threads as a per-lcore
resource. Change this so that the user can create and provide their own
cache on mempool get and put operations. This works with non-EAL threads
too. This commit introduces the new API calls:
rte_mempool_cache_create(size, socket_id)
rte_mempool_cache_free(cache)
rte_mempool_cache_flush(cache, mp)
rte_mempool_default_cache(mp, lcore_id)
Changes the API calls:
rte_mempool_generic_put(mp, obj_table, n, cache, flags)
rte_mempool_generic_get(mp, obj_table, n, cache, flags)
The cache-oblivious API calls use the per-lcore default local cache.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit introduces the API calls:
rte_mempool_generic_put(mp, obj_table, n, is_mp)
rte_mempool_generic_get(mp, obj_table, n, is_mc)
Deprecates the API calls:
rte_mempool_mp_put_bulk(mp, obj_table, n)
rte_mempool_sp_put_bulk(mp, obj_table, n)
rte_mempool_mp_put(mp, obj)
rte_mempool_sp_put(mp, obj)
rte_mempool_mc_get_bulk(mp, obj_table, n)
rte_mempool_sc_get_bulk(mp, obj_table, n)
rte_mempool_mc_get(mp, obj_p)
rte_mempool_sc_get(mp, obj_p)
We also check cookies in one place now.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The standard Virtual Ethernet Bridge(VEB) definition in 1Qbg is a bridge
which has an uplink port to the outside world (maybe another bridge), but
a "floating" VEB is a special VEB without an uplink port to the outside.
Instead, traffic can be sent from one VF to another using the floating
VEB - even when the physical link on the NIC port is down.
This patch adds floating VEB options in the devargs for i40e driver.
Using these parameters, applications can decide whether to use legacy
VEB/VEPA or a floating VEB.
To enable this feature, the user should pass a devargs parameter to the
EAL, for example "-w 84:00.0,enable_floating_veb=1", to control whether
the PMD will to use the floating VEB feature or not.
Once the floating VEB feature is enabled, all the VFs created by
this PF device are connected to the floating VEB.
NOTE: The floating VEB functionality requires a NIC firmware version
of 5.0 or greater.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Provide an update MTU callback. The function returns -ENOTSUP
if Rx scatter is enabled. Updating the MTU to be greater than
the value configured via the Cisco CIMC/UCSM management interface
is allowed provided it is still less than the maximum egress packet
size allowed by the NIC minus the size of the L2 header.
Signed-off-by: John Daley <johndale@cisco.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12
The changes include:
Added sgmii link for X550.
Added mac link setup for X550a SFP and SFP+.
Added KR support for X550em_a.
Added new phy definitions for M88E1500.
Added support for the VLVF to be bypassed when adding/removing
a VFTA entry.
Added X550a flow control auto negotiation support.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This feature enables the TX burst function to emit up to 5 packets using
only two work queue entries (WQEs) on devices that support it. Saves PCI
bandwidth and improves performance.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Implement send inline feature which copies packet data directly into
work queue entries (WQEs) for improved latency. The maximum packet
size and the minimum number of Tx queues to qualify for inline send
are user-configurable.
This feature is effective when HW causes a performance bottleneck.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Mini (compressed) completion queue entries (CQEs) are returned by the
NIC when PCI back pressure is detected, in which case the first CQE64
contains common packet information followed by a number of CQE8
providing the rest, followed by a matching number of empty CQE64
entries to be used by software for decompression.
Before decompression:
0 1 2 6 7 8
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 | | CQE64 |
|-------| |---------| |-------| |-------| |-------| |-------|
| ..... | | cqe8[0] | | | . | | | | | ..... |
| ..... | | cqe8[1] | | | . | | | | | ..... |
| ..... | | ....... | | | . | | | | | ..... |
| ..... | | cqe8[7] | | | | | | | | ..... |
+-------+ +---------+ +-------+ +-------+ +-------+ +-------+
After decompression:
0 1 ... 8
+-------+ +-------+ +-------+
| CQE64 | | CQE64 | | CQE64 |
|-------| |-------| |-------|
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | . | ..... |
| ..... | | ..... | | ..... |
+-------+ +-------+ +-------+
This patch does not perform the entire decompression step as it would be
really expensive, instead the first CQE64 is consumed and an internal
context is maintained to interpret the following CQE8 entries directly.
Intermediate empty CQE64 entries are handed back to HW without further
processing.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
The latest version of Mellanox OFED exposes hardware definitions necessary
to implement data path operation bypassing Verbs. Update the minimum
version requirement to MLNX_OFED >= 3.3 and clean up compatibility checks
for previous releases.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no scatter/gather support anymore, CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N
has no purpose and can be removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Removing dependency on nfp_uio kernel module. The igb_uio
kernel modules can be used instead.
Fixes: 80bc1752f1 ("nfp: add guide")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In current i40e codebase, if single VLAN header is added in a packet,
it's treated as inner VLAN. Generally, a single VLAN header is
treated as the outer VLAN header, so update the driver behaviour
appropriately.
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
For performance reasons, this patch uses 2 VIC RQs per RQ presented to
DPDK.
The VIC requires that each descriptor be marked as either a start of
packet (SOP) descriptor or a non-SOP descriptor. A one RQ solution
requires skipping descriptors when receiving small packets and results
in bad performance when receiving many small packets.
The 2 RQ solution makes use of the VIC feature that allows a receive
on primary queue to 'spill over' into another queue if the receive is
too large to fit in the buffer assigned to the descriptor on the
primary queue. This means that there is no skipping of descriptors
when receiving small packets and results in much better performance.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
- Add device id to the PCI table
- Add polling for the slowpath events for CMT mode device
- Add prerequisites to allow 100g mode
* Min number of queues needed is 2
* Only even number of queues are allowed
- Update documentation
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support for setting hash configuration based on adapter capability
and update corresponding NIC documentation.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Intel stopped supporting Match Interface, remove reference to it in the
documentation.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Updated doc/guides/nics/overview.rst, doc/guides/nics/thunderx.rst
and release notes
Changed "*" to "P" in overview.rst to capture the partially supported
feature as "*" creating alignment issues with Sphinx table
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds the initial skeleton for bnxt driver along with the
nic guide, and ties the driver into the build system.
At this point, the driver simply fails init.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
[Release Note Addition]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Update the documentation and comments with brief details on the base
code version included in this release.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables configuring MTU for i40e.
Since changing MTU needs to reconfigure queue, the port must be
stopped before configuring MTU.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, there was a known issue "On Intel® 40G Ethernet
Controller stopping the port does not really down the port link."
There were two reasons why the port was always kept up.
1. Old firmware versions had issues when "Set PHY config command"
was used on 40G NICs.
2. The kernel i40e driver didn't call "Set PHY config command" when
ifconfig up/down was used, it assumes the link is always up. But
in DPDK, ports are forced down when an applications quits. So if
the port is then switched to being controlled by kernel the driver,
the port can not be brought up through "ifconfig <ethx> up".
This patch fixes this issue by adding in "Set PHY config command"
into our driver. This is now possible because with newer firmware
there is no longer a problem using this command.
With this fix, after DPDK quit, if the port is switched to being used
by the kernel driver, "ethtool -s <ethx> autoneg on" can be used to
turn on the auto negotiation, and then port can be brought up through
"ifconfig <ethx> up".
NOTE: requires kernel i40e driver version >= 1.4.X
Fixes: 2f1e228174 ("i40e: skip link control as firmware workaround")
Fixes: 16c979f9ad ("i40e: disable setting of PHY configuration")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Use ARM NEON intrinsic to implement ixgbe vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[style fixes as highlighted by checkpatch.pl]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch introduced scalable multi-writer Cuckoo Hash insertion
based on a split Cuckoo Search and Move operation using Intel
TSX. It can do scalable hash insertion with 22 cores with little
performance loss and negligible TSX abortion rate.
* Added an extra rte_hash flag definition to switch default single writer
Cuckoo Hash behavior to multiwriter.
- If HTM is available, it would use hardware feature for concurrency.
- If HTM is not available, it would fall back to spinlock.
* Created a rte_cuckoo_hash_x86.h file to hold all x86-arch related
cuckoo_hash functions. And rte_cuckoo_hash.c uses compile time flag to
select x86 file or other platform-specific implementations. While HTM check
is still done at runtime (same idea with
RTE_HASH_EXTRA_FLAGS_TRANS_MEM_SUPPORT)
* Moved rte_hash private struct definitions to rte_cuckoo_hash.h, to allow
rte_cuckoo_hash_x86.h or future platform dependent functions to include.
* Following new functions are created for consistent names when new platform
TM support are added.
- rte_hash_cuckoo_move_insert_mw_tm: do insertion with bucket movement.
- rte_hash_cuckoo_insert_mw_tm: do insertion without bucket movement.
* One extra multi-writer test case is added.
Signed-off-by: Wei Shen <wei1.shen@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Until now, the objects stored in a mempool were internally stored in a
ring. This patch introduces the possibility to register external handlers
replacing the ring.
The default behavior remains unchanged, but calling the new function
rte_mempool_set_ops_byname() right after rte_mempool_create_empty() allows
the user to change the handler that will be used when populating
the mempool.
This patch also adds a set of default ops (function callbacks) based
on rte_ring.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NSH packet can be recognized by Intel X710/XL710 series.
This patch enables the new packet type.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add a new virtual device named virtio-user, which can be used just like
eth_ring, eth_null, etc. To reuse the code of original virtio, we do
some adjustment in virtio_ethdev.c, such as remove key _static_ of
eth_virtio_dev_init() so that it can be reused in virtual device; and
we add some check to make sure it will not crash.
Configured parameters include:
- queues (optional, 1 by default), number of queue pairs, multi-queue
not supported for now.
- cq (optional, 0 by default), not supported for now.
- mac (optional), random value will be given if not specified.
- queue_size (optional, 256 by default), size of virtqueues.
- path (madatory), path of vhost user.
When enable CONFIG_RTE_VIRTIO_USER (enabled by default), the compiled
library can be used in both VM and container environment.
Examples:
path_vhost=<path_to_vhost_user> # use vhost-user as a backend
sudo ./examples/l2fwd/build/l2fwd -c 0x100000 -n 4 \
--socket-mem 0,1024 --no-pci --file-prefix=l2fwd \
--vdev=virtio-user0,mac=00:01:02:03:04:05,path=$path_vhost -- -p 0x1
Known issues:
- Control queue and multi-queue are not supported yet.
- Cannot work with --huge-unlink.
- Cannot work with no-huge.
- Cannot work when there are more than VHOST_MEMORY_MAX_NREGIONS(8)
hugepages.
- Root privilege is a must (mainly becase of sorting hugepages according
to physical address).
- Applications should not use file name like HUGEFILE_FMT ("%smap_%d").
- Cannot work with vhost-net backend.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
